mavenization

2026-11-10 17:22:09 +10:00 · 2025-03-10 15:32:45 +01:00
parent 038e2bcbb4
commit 2caa91eb2e
49 changed files with 4899 additions and 0 deletions
@@ -0,0 +1,151 @@
+<project name="jre-downloader" basedir="..">
+	
+	<property name="jdk.version" value="17.0.14+7" />
+	<property name="jdk.version.file" value="17.0.14_7" />
+
+	<target name="fetch-jre-macos-x86">
+		<property name="jdk.archive.mac.x86" value="OpenJDK17U-jre_x64_mac_hotspot_${jdk.version.file}.tar.gz" />
+		<property name="jdk.url.mac.x86" value="https://github.com/adoptium/temurin17-binaries/releases/download/jdk-${jdk.version}/${jdk.archive.mac.x86}" />
+		<property name="jre.dest.mac.x86" value="${build.dir}/jre_x86" />
+
+		<!-- Clean old jre_macos folder -->
+		<delete dir="${jre.dest.mac.x86}" />
+
+		<!-- Create folder to hold extracted JRE -->
+		<mkdir dir="${jre.dest.mac.x86}" />
+
+		<!-- Download JRE 17 for macOS Intel -->
+		<mkdir dir="${build.dir}/downloads" />
+		<get src="${jdk.url.mac.x86}" dest="${build.dir}/downloads/${jdk.archive.mac.x86}" usetimestamp="true" />
+
+		<!-- Extract JRE into jre_macos -->
+		<untar src="${build.dir}/downloads/${jdk.archive.mac.x86}" dest="${jre.dest.mac.x86}" compression="gzip" />
+		
+		<!-- Move files up one level in place -->
+        <move todir="${jre.dest.mac.x86}">
+            <fileset dir="${jre.dest.mac.x86}/jdk-${jdk.version}-jre" />
+
+        </move>
+
+        <!-- Remove empty top-level folder -->
+        <delete dir="${jre.dest.mac.x86}/jdk-${jdk.version}-jre" />
+
+		<echo message="JRE 17 (macOS Intel) extracted to ${jre.dest.mac.x86}" />
+	</target>
+
+	<target name="fetch-jre-macos-arm">
+		<property name="jdk.archive.mac.arm" value="OpenJDK17U-jre_aarch64_mac_hotspot_${jdk.version.file}.tar.gz" />
+		<property name="jdk.url.mac.arm" value="https://github.com/adoptium/temurin17-binaries/releases/download/jdk-${jdk.version}/${jdk.archive.mac.arm}" />
+		<property name="jre.dest.mac.arm" value="${build.dir}/jre_arm" />
+
+		<!-- Clean old jre_macos folder -->
+		<delete dir="${jre.dest.mac.arm}" />
+
+		<!-- Create folder to hold extracted JRE -->
+		<mkdir dir="${jre.dest.mac.arm}" />
+
+		<!-- Download JRE 17 for macOS Intel -->
+		<mkdir dir="${build.dir}/downloads" />
+		<get src="${jdk.url.mac.arm}" dest="${build.dir}/downloads/${jdk.archive.mac.arm}" usetimestamp="true" />
+
+		<!-- Extract JRE into jre_macos -->
+		<untar src="${build.dir}/downloads/${jdk.archive.mac.arm}" dest="${jre.dest.mac.arm}" compression="gzip" />
+		
+		<!-- Move files up one level in place -->
+		<move todir="${jre.dest.mac.arm}">
+	        <fileset dir="${jre.dest.mac.arm}/jdk-${jdk.version}-jre" />
+
+	    </move>
+
+        <!-- Remove empty top-level folder -->
+        <delete dir="${jre.dest.mac.arm}/jdk-${jdk.version}-jre" />
+
+		<echo message="JRE 17 (macOS Intel) extracted to ${jre.dest.mac.arm}" />
+	</target>
+
+	<target name="fetch-jre-win32">
+		<property name="jdk.archive.win32" value="OpenJDK17U-jre_x86-32_windows_hotspot_${jdk.version.file}.zip" />
+		<property name="jdk.url.win32" value="https://github.com/adoptium/temurin17-binaries/releases/download/jdk-${jdk.version}/${jdk.archive.win32}" />
+		<property name="jre.dest.win32" value="${build.dir}/jre_win" />
+
+		<!-- Clean old jre_win folder -->
+		<delete dir="${jre.dest.win32}" />
+
+		<!-- Create folder to hold extracted JRE -->
+		<mkdir dir="${jre.dest.win32}" />
+
+		<!-- Download JRE 32-bit for Windows -->
+		<mkdir dir="${build.dir}/downloads" />
+		<get src="${jdk.url.win32}" dest="${build.dir}/downloads/${jdk.archive.win32}" usetimestamp="true" />
+
+		<!-- Extract JRE into jre_win -->
+		<unzip src="${build.dir}/downloads/${jdk.archive.win32}" dest="${jre.dest.win32}" />
+		
+		<!-- Move files up one level in place -->
+		<move todir="${jre.dest.win32}">
+            <fileset dir="${jre.dest.win32}/jdk-${jdk.version}-jre" />
+
+        </move>
+
+        <!-- Remove empty top-level folder -->
+        <delete dir="${jre.dest.win32}/jdk-${jdk.version}-jre" />
+
+		<echo message="JRE 17 (32-bit) extracted to ${jre.dest.win32}" />
+	</target>
+
+	<target name="fetch-jre-win64">
+		<property name="jdk.archive.win64" value="OpenJDK17U-jre_x64_windows_hotspot_${jdk.version.file}.zip" />
+		<property name="jdk.url.win64" value="https://github.com/adoptium/temurin17-binaries/releases/download/jdk-${jdk.version}/${jdk.archive.win64}" />
+		<property name="jre.dest.win64" value="${build.dir}/jre_win" />
+
+		<!-- Clean old jre_win folder -->
+		<delete dir="${jre.dest.win64}" />
+
+		<!-- Create folder to hold extracted JRE -->
+		<mkdir dir="${jre.dest.win64}" />
+
+		<!-- Download JRE 64-bit for Windows -->
+		<mkdir dir="${build.dir}/downloads" />
+		<get src="${jdk.url.win64}" dest="${build.dir}/downloads/${jdk.archive.win64}" usetimestamp="true" />
+
+		<!-- Extract JRE into jre_win -->
+		<unzip src="${build.dir}/downloads/${jdk.archive.win64}" dest="${jre.dest.win64}" />
+		
+		<!-- Move files up one level in place -->
+		<move todir="${jre.dest.win64}">
+            <fileset dir="${jre.dest.win64}/jdk-${jdk.version}-jre" />
+        </move>
+
+        <!-- Remove empty top-level folder -->
+        <delete dir="${jre.dest.win64}/jdk-${jdk.version}-jre" />
+
+		<echo message="JRE 17 (64-bit) extracted to ${jre.dest.win64}" />
+	</target>
+
+	<target name="fetch-jre-linux">
+		<property name="jdk.archive.linux" value="OpenJDK17U-jre_x64_linux_hotspot_${jdk.version.file}.tar.gz" />
+		<property name="jdk.url.linux" value="https://github.com/adoptium/temurin17-binaries/releases/download/jdk-${jdk.version}/${jdk.archive.linux}" />
+		<property name="jre.dest.linux" value="${basedir}/build/jre" />
+		<property name="appdir.jre" value="${appdir}/usr/bin/jre" />
+
+		<!-- Ensure clean jre folder -->
+		<delete dir="${jre.dest.linux}" />
+		<mkdir dir="${jre.dest.linux}" />
+
+		<!-- Download JRE 17 if not already present -->
+		<mkdir dir="${build.dir}/downloads" />
+		<get src="${jdk.url.linux}" dest="${build.dir}/downloads/${jdk.archive.linux}" usetimestamp="true" />
+
+		<!-- Extract JRE -->
+		<untar src="${build.dir}/downloads/${jdk.archive.linux}" dest="${jre.dest.linux}" compression="gzip" />
+
+		<!-- Move extracted folder into AppImage location -->
+		<mkdir dir="${appdir.jre}" />
+		<move todir="${appdir.jre}">
+            <fileset dir="${jre.dest.linux}/jdk-${jdk.version}-jre" />
+        </move>
+
+		<echo message="JRE 17 bundled into ${appdir.jre}" />
+	</target>
+
+</project>
@@ -0,0 +1,8 @@
+#!/bin/bash
+#set -x  # Enable debug mode (prints each command before execution)
+
+HERE="$(dirname "$(readlink -f "$0")")"
+echo "AppRun: Running from directory: $HERE"
+echo "AppRun: Executing $HERE/usr/bin/diylc.sh with args: $@"
+
+exec "$HERE/usr/bin/diylc.sh" "$@"
@@ -0,0 +1,39 @@
+# Base Image
+FROM ubuntu:22.04
+
+# Set non-interactive mode for apt
+ENV DEBIAN_FRONTEND=noninteractive
+
+# Install dependencies
+RUN apt-get update && apt-get install -y \
+    wget \
+    fuse \
+    libfuse2 \
+    ca-certificates \
+    openjdk-17-jdk \
+    xz-utils \
+    tree \
+    file \
+	gpg \
+    && rm -rf /var/lib/apt/lists/*
+
+# Set Java Home
+ENV JAVA_HOME="/usr/lib/jvm/java-17-openjdk-amd64"
+ENV PATH="${JAVA_HOME}/bin:${PATH}"
+
+# Download and install appimagetool
+RUN wget -O /usr/local/bin/appimagetool https://github.com/AppImage/AppImageKit/releases/download/continuous/appimagetool-x86_64.AppImage && \
+    chmod +x /usr/local/bin/appimagetool
+	
+RUN apt-get update && apt-get install -y appstream
+
+# Set the working directory
+WORKDIR /build
+
+# Debugging and running AppImage build
+CMD echo "DEBUG: Checking if appimagetool exists..." && \
+    ls -lh /usr/local/bin/appimagetool && \
+	echo "DEBUG: Listing /build/AppDir structure..." && \
+	tree /build/AppDir || ls -R /build/AppDir && \
+    echo "DEBUG: Running appimagetool..." && \
+    ARCH=x86_64 /usr/local/bin/appimagetool /build/AppDir /build/DIYLC-x86_64.AppImage
@@ -0,0 +1,113 @@
+<project name="diylc-swing-appimage" basedir="../../..">
+	
+	<import file="../../../build.xml"/>
+
+	<property name="appdir" value="build/AppDir" />
+	<property name="appimagetool" value="${basedir}/tools/appimagetool-x86_64.AppImage" />
+	<property name="wsl.command" value="wsl bash -c"/>
+
+	<target name="setup-wsl">
+
+		<!-- Install necessary Linux dependencies inside WSL -->
+		<exec executable="cmd.exe" failonerror="true">
+			<arg line="/c ${wsl.command} &quot;sudo apt update &amp;&amp; sudo apt install -y wget libfuse2 fuse&quot;" />
+		</exec>
+
+		<!-- Download AppImageTool into WSL -->
+		<exec executable="cmd.exe" failonerror="true">
+			<arg line="/c ${wsl.command} &quot;wget -O ~/appimagetool https://github.com/AppImage/AppImageKit/releases/download/continuous/appimagetool-x86_64.AppImage &amp;&amp; chmod +x ~/appimagetool&quot;" />
+		</exec>
+	</target>
+
+	<target name="build-appimage">
+
+		<mkdir dir="${appdir}/usr/bin" />
+		<mkdir dir="${appdir}/usr/share/icons/hicolor/512x512/apps" />
+		<mkdir dir="${appdir}/usr/share/metainfo" />
+
+		<!-- Copy app files -->
+		<copy file="${jar.dir}/diylc.jar" todir="${appdir}/usr/lib" />
+		<copy todir="${appdir}/usr/lib/lib">
+			<fileset dir="${jar.dir}/lib">
+				<include name="*"/>
+			</fileset>
+		</copy>
+		<copy todir="${appdir}/usr/lib/library">
+			<fileset dir="${jar.dir}/library">
+				<include name="*"/>
+			</fileset>
+		</copy>
+		<copy todir="${appdir}/usr/bin/templates">
+			<fileset dir="${basedir}/templates">
+				<include name="*"/>
+			</fileset>
+		</copy>
+		<copy todir="${appdir}/usr/bin/themes">
+			<fileset dir="${basedir}/themes">
+				<include name="*"/>
+			</fileset>
+		</copy>
+		<copy todir="${appdir}/usr/bin/fonts">
+			<fileset dir="${basedir}/fonts">
+				<include name="*"/>
+			</fileset>
+		</copy>
+		<copy todir="${appdir}/usr/bin/lang">
+			<fileset dir="${basedir}/lang">
+				<include name="*"/>
+			</fileset>
+		</copy>
+		<copy file="appimage/diylc.sh" tofile="${appdir}/usr/bin/diylc.sh" />
+		<copy file="appimage/AppRun" tofile="${appdir}/AppRun" />
+		<copy file="deploy/splash.png" todir="${appdir}/usr/bin" />
+		<chmod file="${appdir}/AppRun" perm="755" />
+
+		<!-- Copy icons and desktop file -->
+		<copy file="icons/icon_512x512.png" tofile="${appdir}/usr/share/icons/hicolor/512x512/apps/com.diy_fever.DIYLayoutCreator.png" />
+		<copy file="icons/icon_512x512.png" tofile="${appdir}/com.diy_fever.DIYLayoutCreator.png" />
+		<!--<copy file="appimage/com.diy_fever.DIYLayoutCreator.desktop" todir="${appdir}/usr/share/applications" />-->
+		<copy file="appimage/com.diy_fever.DIYLayoutCreator.desktop" todir="${appdir}" />
+		<copy file="appimage/com.diy_fever.DIYLayoutCreator.metainfo.xml" todir="${appdir}/usr/share/metainfo" />
+
+		<exec executable="cmd.exe" failonerror="true">
+            <arg line="/c wsl echo 'WSL is available'"/>
+        </exec>
+		
+		<exec executable="cmd.exe">
+		    <arg line="/c wsl rm -rf /tmp/AppDir"/>
+		</exec>
+		
+		<exec executable="cmd.exe">
+			<arg line="/c wsl cp -r &quot;$(wslpath -u '${appdir}')&quot; /tmp/AppDir"/>
+        </exec>
+		
+		<!--<exec executable="cmd.exe" failonerror="true">
+		    <arg line="/c wsl tree /tmp/AppDir"/>
+		</exec>-->
+		
+		<!-- Convert to Unix line endings -->
+		<exec executable="cmd.exe" failonerror="true">
+		    <arg line="/c ${wsl.command} &quot;sed -i 's/\r$//' /tmp/AppDir/com.diy_fever.DIYLayoutCreator.desktop&quot;"/>
+		</exec>
+    	<exec executable="cmd.exe" failonerror="true">
+		    <arg line="/c ${wsl.command} &quot;sed -i 's/\r$//' /tmp/AppDir/AppRun&quot;"/>
+		</exec>
+    	<exec executable="cmd.exe" failonerror="true">
+		    <arg line="/c ${wsl.command} &quot;sed -i 's/\r$//' /tmp/AppDir/usr/bin/diylc.sh&quot;"/>
+		</exec>
+		
+		<echo message="Starting AppImage build process using WSL..."/>
+
+		<exec executable="cmd.exe" failonerror="true">
+		    <arg line="/c ${wsl.command} &quot;cd /tmp &amp;&amp; ~/appimagetool /tmp/AppDir /tmp/${appimage.output.file}&quot;"/>
+		</exec>
+
+        <echo message="AppImage created successfully in WSL! Copying back to Windows..."/>
+        
+    	<exec executable="cmd.exe" failonerror="true">
+    	    <arg line="/c wsl bash -c &quot;cp /tmp/${appimage.output.file} $(wslpath -u 'build\\${appimage.output.file}')&quot;"/>
+    	</exec>
+
+        <echo message="AppImage build completed successfully! Output: ${appimage.output.file}"/>
+	</target>
+</project>
@@ -0,0 +1,6 @@
+[Desktop Entry]
+Type=Application
+Name=DIY Layout Creator
+Exec=diylc
+Icon=com.diy_fever.DIYLayoutCreator
+Categories=Graphics;Electronics;
@@ -0,0 +1,33 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<component type="desktop-application">
+  <id>com.diy_fever.DIYLayoutCreator</id>
+  <name>DIY Layout Creator</name>
+  <summary>Design and create DIY electronics layouts</summary>
+  <description>
+    <p>DIY Layout Creator (DIYLC) is an open-source, Java-based software for designing layouts for electronics projects. It provides an easy-to-use interface for designing circuits, stripboard layouts, and other DIY electronics designs.</p>
+  </description>
+  <launchable type="desktop-id">com.diy_fever.DIYLayoutCreator.desktop</launchable>
+  <developer_name>Branislav Stojkovic</developer_name>
+  <url type="homepage">https://github.com/bancika/diy-layout-creator</url>
+  <screenshots>
+    <screenshot type="default">
+      <image>https://diy-fever.com/wordpress/wp-content/gallery/diylc/slo.png</image>
+    </screenshot>
+    <screenshot>
+      <image>https://diy-fever.com/wordpress/wp-content/gallery/diylc/travelcaster.png</image>
+    </screenshot>
+    <screenshot>
+      <image>https://diy-fever.com/wordpress/wp-content/gallery/diylc/iic.png</image>
+    </screenshot>
+    <screenshot>
+      <image>https://diy-fever.com/wordpress/wp-content/gallery/diylc/split.png</image>
+    </screenshot>
+  </screenshots>
+ <!-- <releases>
+    <release version="4.0.0" date="2025-03-04">
+      <description>
+        <p>Major UI overhaul, improved export options, and new components added.</p>
+      </description>
+    </release>
+  </releases>-->
+</component>
@@ -0,0 +1,44 @@
+#!/bin/bash
+#set -x  # Enable debug mode
+
+HERE="$(dirname "$(readlink -f "$0")")"
+echo "diylc.sh: Running from directory: $HERE"
+
+# Check if Java is available
+if [ -d "$HERE/jre" ]; then
+    export JAVA_HOME="$HERE/jre"
+    export PATH="$JAVA_HOME/bin:$PATH"
+    JAVA="$JAVA_HOME/bin/java"
+    echo "diylc.sh: Using bundled JRE: $JAVA"
+else
+    JAVA="$(which java)"
+    echo "diylc.sh: Using system Java: $JAVA"
+fi
+
+# Debug: Check Java existence
+if [ ! -x "$JAVA" ]; then
+    echo "diylc.sh: ERROR - Java binary not found or not executable!"
+    exit 1
+fi
+
+cd "$HERE"
+echo "diylc.sh: Current working directory: $(pwd)"
+
+# Debug: Print command before execution
+echo "diylc.sh: Executing DIYLCStarter with Java"
+
+exec "$JAVA" \
+  -javaagent:"$HERE/../lib/lib/jar-loader.jar" \
+  -Xms128m \
+  -Xmx4096m \
+  -cp "$HERE/../lib/diylc.jar:$HERE/../lib/lib/*" \
+  --add-exports java.desktop/com.apple.eawt.event=ALL-UNNAMED \
+  --add-exports java.desktop/com.apple.eio=ALL-UNNAMED \
+  --add-opens java.base/java.util=ALL-UNNAMED \
+  --add-opens java.base/java.lang=ALL-UNNAMED \
+  --add-opens java.base/java.text=ALL-UNNAMED \
+  --add-opens java.desktop/java.awt=ALL-UNNAMED \
+  --add-opens java.desktop/java.awt.font=ALL-UNNAMED \
+  --add-opens java.desktop/java.awt.geom=ALL-UNNAMED \
+  -Dorg.diylc.scriptRun=true \
+  org.diylc.DIYLCStarter "$@"
@@ -0,0 +1,75 @@
+# 🚀 Setting up WSL and AppImage Builder
+
+This script sets up **WSL (Windows Subsystem for Linux)** and installs the necessary dependencies for building AppImages.
+
+---
+
+## 📜 Installation Script
+
+```batch
+@echo off
+echo ========================================
+echo  🚀 Setting up WSL and AppImage Builder
+echo ========================================
+echo.
+
+:: Check if WSL is installed
+wsl --version >nul 2>&1
+if %ERRORLEVEL% NEQ 0 (
+    echo 🔧 Installing WSL...
+    wsl --install -d Ubuntu22.04
+    echo ✅ WSL installed! Please restart your computer and re-run this script.
+    exit /b
+)
+
+echo 🔧 Ensuring Ubuntu is set as default WSL distribution...
+wsl --set-default Ubuntu
+
+:: Check if WSL is running
+wsl echo "WSL is running..."
+if %ERRORLEVEL% NEQ 0 (
+    echo ❌ ERROR: WSL is not running. Please restart your system and try again.
+    exit /b
+)
+
+:: Update and install dependencies inside WSL
+echo 🔧 Installing dependencies inside WSL...
+wsl sudo apt update && sudo apt install -y ^
+    wget ^
+    fuse ^
+    libfuse2 ^
+    ca-certificates ^
+    xz-utils ^
+    file ^
+    appstream ^
+    gpg ^
+    libc6 ^
+    binfmt-support ^
+    tree
+
+wsl sudo apt update && sudo apt install -y libfuse2
+
+echo ✅ Dependencies installed!
+
+:: Download AppImageTool inside WSL
+echo 🔧 Downloading AppImageTool...
+wsl bash -c "wget -O ~/appimagetool https://github.com/AppImage/AppImageKit/releases/download/continuous/appimagetool-x86_64.AppImage && chmod +x ~/appimagetool"
+
+:: Verify AppImageTool installation
+echo 🔧 Verifying AppImageTool installation...
+wsl bash -c "~/appimagetool --version"
+
+if %ERRORLEVEL% NEQ 0 (
+    echo ❌ ERROR: AppImageTool failed to execute.
+    echo Please check if WSL is running properly and try again.
+    exit /b
+)
+
+echo ✅ WSL is now ready for ANT to build AppImages!
+echo.
+
+:: Optional: Open WSL shell for user confirmation
+echo 🔧 Opening WSL shell...
+wsl
+
+exit /b
@@ -0,0 +1,67 @@
+@echo off
+echo ========================================
+echo  ðŸš€ Setting up WSL and AppImage Builder
+echo ========================================
+echo.
+
+:: Check if WSL is installed
+wsl --version >nul 2>&1
+if %ERRORLEVEL% NEQ 0 (
+    echo ðŸ”¹ Installing WSL...
+    wsl --install -d Ubuntu22.04
+    echo âœ… WSL installed! Please restart your computer and re-run this script.
+    exit /b
+)
+
+echo ðŸ”¹ Ensuring Ubuntu is set as default WSL distribution...
+wsl --set-default Ubuntu
+
+:: Check if WSL is running
+wsl echo "WSL is running..."
+if %ERRORLEVEL% NEQ 0 (
+    echo â�Œ ERROR: WSL is not running. Please restart your system and try again.
+    exit /b
+)
+
+:: Update and install dependencies inside WSL
+echo ðŸ”¹ Installing dependencies inside WSL...
+wsl sudo apt update && sudo apt install -y \
+    wget \
+    fuse \
+    libfuse2 \
+    ca-certificates \
+    xz-utils \
+    file \
+    appstream \
+    gpg \
+    libc6 \
+    binfmt-support \
+    tree
+    
+wsl sudo apt update && sudo apt install -y libfuse2
+
+echo âœ… Dependencies installed!
+
+:: Download AppImageTool inside WSL
+echo ðŸ”¹ Downloading AppImageTool...
+wsl bash -c "wget -O ~/appimagetool https://github.com/AppImage/AppImageKit/releases/download/continuous/appimagetool-x86_64.AppImage && chmod +x ~/appimagetool"
+
+:: Verify AppImageTool installation
+echo ðŸ”¹ Verifying AppImageTool installation...
+wsl bash -c "~/appimagetool --version"
+
+
+if %ERRORLEVEL% NEQ 0 (
+    echo â�Œ ERROR: AppImageTool failed to execute.
+    echo Please check if WSL is running properly and try again.
+    exit /b
+)
+set
+echo âœ… WSL is now ready for ANT to build AppImages!
+echo.
+
+:: Optional: Open WSL shell for user confirmation
+echo ðŸ”¹ Opening WSL shell...
+wsl
+
+exit /b
@@ -0,0 +1,48 @@
+#!/bin/bash
+
+export JAVA_HOME=$SNAP/usr/lib/jvm/java-8-openjdk-amd64
+export PATH=$JAVA_HOME/jre/bin:$PATH
+
+#Start in user configuration directory 
+cd $SNAP_USER_DATA
+
+#Create any missing user configuration directories
+
+#themes
+if [ ! -d $SNAP_USER_DATA/themes ]
+then
+	mkdir $SNAP_USER_DATA/themes
+fi
+
+#copy themes
+if [ ! -f $SNAP_USER_DATA/themes/'Blueprint.xml' ]
+then
+	cp $SNAP/themes/'Blueprint.xml' $SNAP_USER_DATA/themes/'Blueprint.xml'
+fi
+
+if [ ! -f $SNAP_USER_DATA/themes/'Dark.xml' ]
+then
+	cp $SNAP/themes/'Dark.xml' $SNAP_USER_DATA/themes/'Dark.xml'
+fi
+
+if [ ! -f $SNAP_USER_DATA/themes/'Light.xml' ]
+then
+	cp $SNAP/themes/'Light.xml' $SNAP_USER_DATA/themes/'Light.xml'
+fi
+
+if [ ! -f $SNAP_USER_DATA/themes/'Gray.xml' ]
+then
+	cp $SNAP/themes/'Gray.xml' $SNAP_USER_DATA/themes/'Gray.xml'
+fi
+
+cd $SNAP
+
+echo =============================================
+echo SNAP
+echo $SNAP
+echo =============================================
+echo SNAP_USER_DATA
+echo $SNAP_USER_DATA
+echo =============================================
+
+java -Xms512m -Xmx2048m -Dorg.diylc.scriptRun=true -Duser.dir=$SNAP_USER_DATA -Dfile.encoding=UTF-8 -cp $SNAP/diylc.jar:lib --add-opens java.base/java.util=ALL-UNNAMED --add-opens java.base/java.lang=ALL-UNNAMED --add-opens java.base/java.text=ALL-UNNAMED --add-opens java.desktop/java.awt=ALL-UNNAMED --add-opens java.desktop/java.awt.font=ALL-UNNAMED --add-opens java.desktop/java.awt.geom=ALL-UNNAMED org.diylc.DIYLCStarter
@@ -0,0 +1,11 @@
+[Desktop Entry]
+Name=DIY Layout Creator
+GenericName=Electronic circuit drawing tool
+Comment=Multi platform circuit layout and schematic drawing tool
+Exec=diylc
+Icon=com.diy_fever.DIYLayoutCreator
+Terminal=false
+Type=Application
+Categories=Development;Electronics;Graphics;
+Keywords=EDA;PCB;Schematics;
+StartupNotify=false
@@ -0,0 +1,430 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<component type="desktop-application">
+  <id>com.diy_fever.DIYLayoutCreator</id>
+  <launchable type="desktop-id">com.diy_fever.DIYLayoutCreator.desktop</launchable>
+  <metadata_license>CC0-1.0</metadata_license>
+  <project_license>GPL-3.0-only</project_license>
+  <developer_name>Branislav Stojkovic (bancika)</developer_name>
+  <name>DIY Layout Creator</name>
+  <summary>Circuit layout design tool supporting PCB, vero-board, point-to-point, perf-board and guitar wiring diagrams</summary>
+  <description>
+    <p>
+      DIY Layout Creator (DIYLC in short) is a powerful, but simple to use and intuitive tool for visualizing electronic circuit schematic and layout diagrams. It provides a simple WYSIWYG interface and supports designing PCB, vero-board, point-to-point, perf-board and guitar wiring diagrams as well as circuit schematics quickly and without the steep learning curve.
+    </p>
+    <p>
+      In addition to drawing, the projects can be shared with other users through the integrated 'Cloud' feature. Guitar wiring diagrams can be analyzed and debugged.
+    </p>
+    <p>
+      DIYLC is geared towards DIY hobby enthusiasts and is developed by an enthusiast with the help of the large community of DIY builders.
+    </p>
+  </description>
+  <screenshots>
+    <screenshot type="default">
+    <image type="source">http://diy-fever.com/wordpress/wp-content/gallery/diylc/diylc_3_36_rangemaster.png</image>
+    <caption>First look</caption>
+    </screenshot>
+    <screenshot>
+    <image type="source">https://scfxguide.files.wordpress.com/2016/01/diylc1-e1453557339678.png</image>
+    <caption>Second look</caption>
+    </screenshot>
+  </screenshots>
+  <url type="homepage">https://github.com/bancika/diy-layout-creator</url>
+  <url type="bugtracker">https://github.com/bancika/diy-layout-creator/issues</url>
+  <url type="donation">http://diy-fever.com/donate</url>
+  <url type="help">https://github.com/bancika/diy-layout-creator/tree/wiki</url>
+  <url type="faq">https://github.com/bancika/diy-layout-creator/blob/wiki/FAQ.md</url>
+  <!--<url type="contact">mailto:bancika_AT_gmail.com</url>-->
+  <update_contact>nbenitezl_AT_gmail.com</update_contact>
+  <content_rating type="oars-1.1"/>
+  <releases>
+  	<release version="4.40.0" date="2025-02-20">
+         <description>
+           <ul>
+             <li>[New Feature] Freeway 3x3-03 Toggle switch added</li>
+             <li>[New Feature] Guitar wiring analyzer can now detect treble bleed circuit on volume controls</li>
+             <li>[New Feature] Added headless mode for direct render to file without the GUI - use 'inputFile --export (--force) outputFile' syntax</li>
+             <li>[New Feature] Added two types of 4PDT On/On/On Switches, e.g. DiMarzio EP1111 (thank you Lukasz Tekieli)</li>
+             <li>[New Feature] Ability to set explicit dimensions of basic shapes - rectangles and ellipses</li>
+             <li>[New Feature] Ability to change pitch and appearance of PCB Terminal Block component</li>
+             <li>[Improvement] Better rendering of the effective circuit graph in the guitar wiring analyzer, showing series and parallel connections in a more intuitive way</li>
+             <li>[Improvement] Increased max undo stack size to 128 versions</li>
+             <li>[Improvement] Added 1-pole DIP switch option</li>
+             <li>[Improvement] Allow guitar wiring analyzer when some of the switching configuration do not produce output</li>
+             <li>[Improvement] 'Save As' displays the current file name by default</li>
+             <li>[Improvement] 'Proto Board 780 Holes' now aligns with the grid</li>
+             <li>[Improvement] Show Label text in 'Project Explorer' in addition to the name</li>
+             <li>[Bug Fix] Fixed null pointer exceptions when trying to add components to the layout in some cases</li>
+             <li>[Bug Fix] Loading files that contain lines with end arrows sometimes produces errors in the log and lines not to be loaded</li>
+             <li>[Bug Fix] Mouse click to select intermittently doesn't register on Mac machines</li>
+             <li>[Bug Fix] Ctrl + Minus sign sometimes doesn't zoom out</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.40.0</url>
+     </release>
+  	<release version="4.39.0" date="2025-01-25">
+         <description>
+           <ul>
+             <li>[Improvement] Upgraded JRE version of Mac builds to Temurin 17 and switched OpenGL to Metal rendering engine for improved performance</li>
+             <li>[Bug Fix] Choosing "Print" option from the menu starts printing immediately before choosing printing preferences</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.39.0</url>
+     </release>
+  	<release version="4.38.0" date="2024-12-23">
+         <description>
+           <ul>
+             <li>[New Feature] Buzzer component and symbol added (thanks M0JXD)</li>
+             <li>[New Feature] Resistor symbol now has two draw standards - ANSI and IEC (thanks M0JXD)</li>
+             <li>[Improvement] Fixed run.sh application starter for Linux and Apple OSX with M1/M2 processors when using Java 17 or newer</li>
+             <li>[Improvement] When editing Label components, default focus to the text editor</li>
+             <li>[Bug Fix] Unable to move selected components if one of them is close to being reduced to a point</li>
+             <li>[Bug Fix] Toroidal Inductor hangs the application if it doesn't have inductance value set</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.38.0</url>
+	</release>
+  	<release version="4.37.0" date="2023-04-27">
+         <description>
+           <ul>
+             <li>[New Feature] 'Proto Board 780 Holes' added with two variations (sponsored by Pete Olivier)</li>
+             <li>[Improvement] Ability to rotate (almost) all components using keyboard shortcuts and 'Transform Selection' menu</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.37.0</url>
+     </release>
+  	<release version="4.36.0" date="2023-03-30">
+         <description>
+           <ul>
+             <li>[New Feature] Title Block added as one of factory building blocks (was missing in 4.35 by mistake)</li>
+             <li>[New Feature] Configurable max switch combination count for circuit analysis (using org.diylc.maxSwitchCombinations argument)</li>
+             <li>[Improvement] Added resilience to the code that saves the configuration file to avoid it getting corrupted</li>
+             <li>[Improvement] When backing up the configuration file, append the current timestamp at the end instead of a '~'</li>
+             <li>[Improvement] Improve the format of timestamp in file backups</li>
+             <li>[Bug Fix] General application slowness when Inductor component is added to the drawing</li>
+             <li>[Bug Fix] Lever switch orientation not loaded correctly from files created prior to version 4.35</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.36.0</url>
+     </release>
+  	<release version="4.35.0" date="2022-12-23">
+         <description>
+           <ul>
+             <li>[New Feature] Added '1/8" Cliff Jack' component - stereo and mono</li>
+             <li>[New Feature] Added 'Solder Lug' component</li>
+             <li>[New Feature] Added 'PCB Terminal Block' component</li>
+             <li>[New Feature] Show component values in the project explorer</li>
+             <li>[New Feature] Double click in the project explorer to edit selected component</li>
+             <li>[New Feature] Title Block added as one of factory building blocks</li>
+             <li>[New Feature] 'Renumber On Paste' feature now applies to variants as well. When set to OFF, the app honors the name saved in the variant</li>
+             <li>[New Feature] New file icons for Mac OS</li>
+             <li>[Improvement] Ability to use up/down arrow keys in the project explorer to select components</li>
+             <li>[Improvement] Use scroll buttons in 'Tabbed Toolbar' instead of arranging tabs into multiple lines when the screen is not large enough to show them all</li>
+             <li>[Improvement] Escape comma in BOM CSV files to avoid component names being split into separate columns</li>
+             <li>[Improvement] Show jack type in the BOM and project explorer</li>
+             <li>[Improvement] Show wire gauge in the BOM and project explorer</li>
+             <li>[Improvement] Improved find tool usability, make the screen pan to the selected components</li>
+             <li>[Bug Fix] Trace cut doesn't affect continuity of vero board traces</li>
+             <li>[Bug Fix] DIL IC pin labels incorrect in the netlist</li>
+             <li>[Bug Fix] Diode symbol doesn't appear in the BOM</li>
+             <li>[Bug Fix] Upon starting or opening a project, the ruler is slightly miss-aligned with the project boundaries</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.35.0</url>
+     </release>
+  	<release version="4.34.0" date="2022-12-09">
+         <description>
+           <ul>
+             <li>[New Feature] Added 'Project Explorer' pane in the right-hand side for quick access to components</li>
+             <li>[New Feature] Keyboard shortcuts for toggling layer visibility using Ctrl + 1 through Ctrl + 6</li>
+             <li>[Improvement] Circuit analysis algorithm that supports netlist extraction, 'Highlight connected Areas' and 'Guitar Wiring Analyzer' features improved to take PCB trace layer and component z-order into account for better accuracy</li>
+             <li>[Improvement] Potentiometer bodies are no longer considered as conductive surfaces to avoid unwanted shorts</li>
+             <li>[Improvement] Optimized memory usage when having many Hookup Wire components</li>
+             <li>[Improvement] Improved conductivity tracking of Terminal Strip</li>
+             <li>[Bug Fix] Do not apply any user-default property values when creating a standard datasheet model (e.g. a capacitor)</li>
+             <li>[Bug Fix] Variants of boards having explicit sizing mode fail when trying to add to a project</li>
+             <li>[Bug Fix] Font settings (e.g. bold) sometimes bleed into wrong component</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.34.0</url>
+     </release>
+  	<release version="4.33.0" date="2022-11-16">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed an issue that would cause capacitors to fail when creating, editing, moving or deleting</li>
+             <li>[New Feature] Added standard models in the drop down menu of the component toolbar</li>
+             <li>[New Feature] Radial Electrolytic Capacitor - added standard models from Nichicon FW datasheet</li>
+             <li>[New Feature] Radial Film Capacitor - added standard models from Epcos MKT datasheet</li>
+             <li>[New Feature] Radial Film Capacitor - added ability to select package shape - drop or box style</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.33.0</url>
+     </release>
+  	<release version="4.32.0" date="2022-11-11">
+         <description>
+           <ul>
+             <li>[New Feature] Added 'Radial Mica Capacitor' component</li>
+             <li>[New Feature] Introduced support for standard models of components, defined in the product datasheet. Right click menu in the toolbox now contains additional options for creating components with exact values and dimension as specified in the datasheet. Right click on the existing components now has 'Apply Model' option which can apply properties of a standard component model from the datasheet to selected component(s)</li>
+             <li>[New Feature] Axial Film Capacitor - added standard models from Mallory 150 and Solen Fast datasheet</li>
+             <li>[New Feature] Radial Film Capacitor - added standard models from Orange Drop 225P, 715P and 716P, WIMA FKP-02, FKP-2, FKS-2, MKP-2, MKP-4, MKS-02, MKS-2 datasheet</li>
+             <li>[New Feature] Axial Electrolytic Capacitor - added standard models from F&amp;T A Typ, Illinois TTA, JJ ANH and Sprague TVA Atom datasheet</li>
+             <li>[New Feature] Radial Electrolytic Capacitor - added standard models from Elna Silmic II, Nichicon FG, KZ, Panasonic FC, FM and HNG datasheet</li>
+             <li>[New Feature] Radial Mica Capacitor - added standard models from Cornell Dubilier CD10, CD15, CD19, CD30, CD42, CDV19, CDV30 datasheet</li>
+             <li>[New Feature] Added 'Tubular Beveled' shape option to Resistor component and added Dale C*F55 and C*F60 resistor variants</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.32.0</url>
+     </release>
+  	<release version="4.31.0" date="2022-10-31">
+         <description>
+           <ul>
+             <li>[New Feature] Added "Switch (Latching)" schematic symbol with many variations</li>
+             <li>[New Feature] Added "Common Node" component that ties all nodes with the same label together, e.g. B+, V+, GND, etc</li>
+             <li>[Improvement] "Snap to Components" features now works when creating new components as well as when moving existing ones</li>
+             <li>[Improvement] Added more variants of existing and new components</li>
+             <li>[Improvement] Increase the opacity of locked components</li>
+             <li>[Improvement] Improved ground symbol mouse selection tracking and added stroke width as a parameter</li>
+             <li>[Bug Fix] Ground symbol ties all grounded points together for circuit analysis</li>
+             <li>[Bug Fix] Printed projects are sometimes missing parts of components or text</li>
+             <li>[Bug Fix] "Snap to" configuration menu does not work properly when using translated UI to any language other than English</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.31.0</url>
+     </release>
+  	 <release version="4.30.1" date="2022-10-23">
+         <description>
+           <ul>
+             <li>[New Feature] Fix the build that wouldn't run due to a missing package</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.30.1</url>
+     </release>
+  	 <release version="4.30.0" date="2022-10-22">
+         <description>
+           <ul>
+             <li>[New Feature] Added 'Rotary Switch (Sealed)' component in several switching configurations</li>
+             <li>[New Feature] Added 'Rotary Switch (Open)' component in several switching configurations</li>
+             <li>[New Feature] Added 'S1 Switch' component that can be combined with potentiometer component or used on its own</li>
+             <li>[New Feature] Added 'DP4T (6-Position Oak Grigsby)' as a new type of Lever Switch component</li>
+             <li>[New Feature] Ability to rotate 'Lever Switch' and 'Schaller Megaswitch' by any angle</li>
+             <li>[New Feature] DIYLC Netlists can be generated including or excluding switching configurations</li>
+             <li>[Improvement] Ability to rotate all guitar/bass pickups through the 'Transform Selection' feature or keyboard shortcut</li>
+             <li>[Improvement] Improved the speed and accuracy of circuit analysis and netlist calculation</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.30.0</url>
+     </release>
+  	 <release version="4.29.0" date="2022-10-04">
+         <description>
+           <ul>
+             <li>[New Feature] Added 6 variations of Schaller Megaswitch</li>
+             <li>[New Feature] Added 'DP3T (Import 5-Position Strat)' type of lever switch</li>
+             <li>[New Feature] Added 'Stingray Bass Pickup' component. Thank you JD!</li>
+             <li>[New Feature] Added 'Bulb' schematic symbol. Thank you JD!</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.29.0</url>
+     </release>
+     <release version="4.28.0" date="2022-09-25">
+         <description>
+           <ul>
+             <li>[New Feature] Added '4-pin Jumbo Tube Socket' component for 211, 805 and 845 tubes</li>
+             <li>[Improvement] More convenient way of editing angle of rotation of all tube sockets</li>
+             <li>[Improvement] Ability to rotate all tube sockets through the 'Transform Selection' feature or keyboard shortcot</li>
+             <li>[Bug Fix] Tube socket pin designations are not rendered until property editor dialog is opened and closed</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.28.0</url>
+     </release>
+  	 <release version="4.27.0" date="2022-08-28">
+         <description>
+           <ul>
+             <li>[New Feature] Added 'Current Source' symbol. Thank you, JD!</li>
+             <li>[Improvement] Few minor improvements</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.27.0</url>
+     </release>
+     <release version="4.26.0" date="2022-08-27">
+         <description>
+           <ul>
+             <li>[New Feature] Added 'Voltage Source' symbol. Thank you, JD!</li>
+             <li>[New Feature] Added two DPDT ON/ON/ON variations to 'Mini Toggle Switch' component</li>
+             <li>[Bug Fix] The app crashes if there's a component that is reduced to 0 pixels with 'Cache Boost' enabled</li>
+             <li>[Bug Fix] Removed 'Hardware Acceleration' feature as it causes issues with modern graphic cards</li>
+             <li>[Improvement] When opening files from the 'Recent Files' menu, show busy cursor instead of blocking the main app thread</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.26.0</url>
+     </release>
+     <release version="4.25.0" date="2022-07-09">
+         <description>
+           <ul>
+             <li>[Bug Fix] Status bar shows a wrong number of selected components</li>
+             <li>[Bug Fix] Fix run.sh to Unix line breaks</li>
+             <li>[Improvement] Limit memory usage to avoid out of memory errors when 'Cache Boost' feature is enabled on complex project</li>
+             <li>[Improvement] Cleanup cache when a component is deleted from the project</li>
+             <li>[Improvement] Added BJT B-C-E pinout to transistor components</li>
+             <li>[Improvement] Changed resistor orange band color to more intense orange</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.25.0</url>
+     </release>
+  	 <release version="4.24.0" date="2022-06-05">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed a bug that causes the background of exported images and PDFs to be very light gray instead of pure white</li>
+             <li>[Improvement] Automatically run Java garbage collector when available memory reaches 10%</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.24.0</url>
+     </release>
+  	 <release version="4.23.0" date="2022-04-23">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed the issue with the application not starting under Windows</li>
+             <li>[New Feature] Added 'Slide Switch' component</li>
+             <li>[Improvement] Improved rendering performance significantly</li>
+             <li>[Improvement] Include JRE in the universal ZIP package (the embedded JRE is only for Windows)</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.23.0</url>
+     </release>
+  	 <release version="4.22.2" date="2022-03-18">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed the issue with application hanging when loading certain files</li>
+             <li>[Bug Fix] Fixed importing building blocks and variants from a file</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.22.2</url>
+     </release>
+  	  <release version="4.22.1" date="2022-03-07">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed backwards compatibility issue with older files failing to open because of an issue with 'Tape Measure' component serialization</li>
+             <li>[Bug Fix] Fixed the issue with 'Add Flexible Leads' functionality placing the flexible leads wrong on leaded components (e.g. resistors, capacitors...)</li>
+             <li>[Bug Fix] Fixed display issue with Trace layer showing up as Wiring in the menu</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.22.1</url>
+     </release>
+  	 <release version="4.22.0" date="2022-03-03">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed backwards compatibility issue with older files failing to open because of an issue with 'Mini Toggle Switch' component serialization</li>
+             <li>[Bug Fix] Fix component prefix for SMD Resistor</li>
+             <li>[Improvement] Separate WIRING layer (containing 'Hookup Wire' and 'Twisted Wire' at the moment) from TRACE layer and render it above the COMPONENT layer by default</li>
+             <li>[Improvement] Upgrade OSX application package built-in Java to JRE 1.8.0_321-b07</li>
+             <li>[New Feature] Added regression test suite that validates each release candidate version against a barrage of different DIY files</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.22.0</url>
+     </release>
+  	  <release version="4.21.4" date="2022-02-27">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed the issue with stereo phono jack rendering issues when rotated</li>
+             <li>[Improvement] Improved precision of zooming in and out when nothing is selected</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.21.4</url>
+     </release>
+     <release version="4.21.3" date="2022-02-22">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed the issue with the app going back to .diylc user directory for configuration storage. Only diylc directory is used going forward, please copy config.xml from .diylc to diylc if you are missing any configuration</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.21.3</url>
+     </release>  
+  	<release version="4.21.2" date="2022-02-21">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed broken Linux app package</li>             
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.21.2</url>
+     </release>
+  	 <release version="4.21.1" date="2022-02-19">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed broken OSX app package</li>
+             <li>[New Feature] Added regulator pinouts to transistor body components</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.21.1</url>
+     </release>
+  	 <release version="4.21.0" date="2022-02-16">
+         <description>
+           <ul>
+             <li>[Bug Fix] Fixed compatibility issues with Java version 16 and above</li>
+             <li>[New Feature] Added 'Gray' theme</li>
+             <li>[Improvement] Add shabang to run.sh for *nix systems</li>
+             <li>[Improvement] Prevent the donation label from wrapping into several lines</li>
+             <li>[Improvement] Use Backspace key to delete selection in Mac OS</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.21.0</url>
+     </release>
+  	 <release version="4.20.0" date="2021-09-12">
+         <description>
+           <ul>
+             <li>[New Feature] Added 'Open 1/8" Jack' component</li>
+           </ul>
+         </description>
+         <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.20.0</url>
+     </release>
+	 <release version="4.19.0" date="2021-08-21">
+	     <description>
+	       <ul>
+	         <li>[New Feature] Added 'Dial Scale' component for designing device face-plates</li>
+	         <li>[New Feature] Keep grouped components together when pasting</li>
+	       </ul>
+	     </description>
+	     <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.19.0</url>
+	</release>
+	<release version="4.18.0" date="2021-07-11">
+	  <description>
+	    <ul>
+	      <li>[New Feature] Added 'SVG Image' component, to allow importing vector graphics into projects</li>
+	      <li>[Bug Fix] Mini Toggle Switch - lugs do not get rotated when changing orientation; rotate from the context menu doesn't work</li>
+	      <li>[Bug Fix] Fixed the issue with Perf Board, Vero Board and TriPad Board sometimes rendering an extra row with pads when there's no space for them</li>
+	    </ul>
+	  </description>
+	  <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.18.0</url>
+	</release>
+	<release version="4.17.0" date="2021-02-14">
+	  <description>
+	    <ul>
+	      <li>[New Feature] Added 'Eurorack Stripboard' component, designed by David Haillant</li>
+	      <li>[New Feature] Allow multi-line text in label components</li>
+	      <li>[Improvement] Slightly fancier splash screen :)</li>
+	      <li>[Bug Fix] Fixed a major memory leak when using Undo functionality</li>
+	    </ul>
+	  </description>
+	  <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.17.0</url>
+	</release>
+    <release version="4.16.0" date="2021-01-17">
+      <description>
+        <ul>
+          <li>[New Feature] Flatpak integration for easier deployments to Linux systems</li>
+          <li>[New Feature] When editing component colors, honor the specified 'alpha' value specified on each color individually in addition to the component-level alpha property</li>
+          <li>[Improvement] Color chooser dialog defaults to the existing color value being edited</li>
+          <li>[Improvement] Single click to expand and collapse categories in the component tree</li>
+          <li>[Improvement] Improved code robustness</li>
+          <li>[Improvement] Improved Dark theme look</li>
+          <li>[Bug Fix] Auto-Wrap Label crashes the application if it's shrunken into zero-length</li>
+        </ul>
+      </description>
+      <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.16.0</url>
+    </release>
+    <release version="4.15.1" date="2021-01-04">
+    <description>
+      <ul>
+        <li>[Bug Fix] macOS: issues with scrollable toolbar that prevent it from starting on mac machines.</li>
+      </ul>
+    </description>
+    <url>https://github.com/bancika/diy-layout-creator/releases/tag/v4.15.1</url>
+    </release>
+  </releases>
+</component>
@@ -0,0 +1,2 @@
+#!/bin/bash
+exec java -Xms512m -Xmx4096m -javaagent:lib/jar-loader.jar -Dorg.diylc.scriptRun=true -Dfile.encoding=UTF-8 -cp diylc.jar:lib --add-exports java.desktop/com.apple.eawt.event=ALL-UNNAMED  --add-exports java.desktop/com.apple.eio=ALL-UNNAMED --add-opens java.base/java.util=ALL-UNNAMED --add-opens java.base/java.lang=ALL-UNNAMED --add-opens java.base/java.text=ALL-UNNAMED --add-opens java.desktop/java.awt=ALL-UNNAMED --add-opens java.desktop/java.awt.font=ALL-UNNAMED --add-opens java.desktop/java.awt.geom=ALL-UNNAMED  org.diylc.DIYLCStarter "$@"
@@ -0,0 +1,34 @@
+<project name="diylc-swing-ftp" basedir=".."
+	default="printVersion">
+	<property environment="env" />
+	<property name="FTP_USER" value="diylc_deploy@diy-fever.com" />
+	<property name="URL" value="ftp.diy-fever.com" />
+
+	<target name="upload">
+		<echo
+			message="Logging to ${FTP_USER}:${env.DIYLC_DEPLOY_PWD}@${URL}" />
+		<ftp server="${URL}" userid="${FTP_USER}"
+			password="${env.DIYLC_DEPLOY_PWD}">
+			<fileset dir="./../diylc-core/src/org/diylc/presenter">
+				<include name="update.xml" />
+			</fileset>
+		</ftp>
+	</target>
+
+	<path id="class.path">
+		<fileset dir="${basedir}">
+			<include name="lib/**/*.jar" />
+			<include name="library/**/*.jar" />
+		</fileset>
+	</path>
+
+	<target name="printVersion">
+		<java classname="org.diylc.utils.VersionReader">
+			<sysproperty key="DEBUG" value="true" />
+			<arg value="${basedir}/" />
+			<classpath>
+				<path refid="class.path" />
+			</classpath>
+		</java>
+	</target>
+</project>
@@ -0,0 +1,2 @@
+ftype diyfile="%CD%\diylc.exe" "%%1"
+assoc .diy=diyfile
@@ -0,0 +1 @@
+-Xms512m -Xmx4096m -Dorg.diylc.scriptRun=true -Dfile.encoding=UTF-8
@@ -0,0 +1,67 @@
+[Setup]
+AppName=DIY Layout Creator
+AppVersion={#diylcver}
+DefaultDirName={pf}\DIYLC
+DefaultGroupName=DIY Layout Creator
+UninstallDisplayIcon={app}\diylc.exe
+Compression=zip
+SolidCompression=yes
+OutputDir=../build
+OutputBaseFilename=diylc
+ChangesAssociations=yes
+AlwaysShowDirOnReadyPage=yes
+; Only allow the installer to run on x64-compatible systems,
+; and enable 64-bit install mode.
+ArchitecturesAllowed={#arch}
+ArchitecturesInstallIn64BitMode={#arch}
+
+[Files]
+Source: "..\build\diylc.exe"; DestDir: "{app}"
+Source: "..\icons\diylc_file.ico"; DestDir: "{app}"
+Source: "..\build\jar\diylc.jar"; DestDir: "{app}"
+Source: "..\build\jar\lib\*"; DestDir: "{app}\lib"
+Source: "..\build\jar\library\*"; DestDir: "{app}\library"
+Source: "..\themes\*"; DestDir: "{app}\themes"
+Source: "..\lang\*"; DestDir: "{app}\lang"
+Source: "..\fonts\*"; DestDir: "{app}\fonts"
+Source: "..\build\jre_win\*"; DestDir: "{app}\jre17"; Flags: ignoreversion recursesubdirs
+Source: "innosetup\donate.bmp"; DestDir: "{tmp}"; Flags: dontcopy nocompression
+
+[Registry]
+Root: HKCR; Subkey: ".diy"; ValueData: "DIYLC"; Flags: uninsdeletevalue; ValueType: string; ValueName: ""
+Root: HKCR; Subkey: "DIYLC"; ValueData: "Program DIYLC";  Flags: uninsdeletekey; ValueType: string; ValueName: ""
+Root: HKCR; Subkey: "DIYLC\DefaultIcon"; ValueData: "{app}\diylc_file.ico"; ValueType: string;  ValueName: ""
+Root: HKCR; Subkey: "DIYLC\shell\open\command";  ValueData: """{app}\diylc.exe"" ""%1"""; ValueType: string; ValueName: ""
+
+[Icons]
+Name: "{group}\DIY Layout Creator"; Filename: "{app}\diylc.exe"
+
+[Run]
+Filename: "{app}\diylc.exe"; Description: "Launch DIYLC on exit"; Flags: postinstall skipifsilent
+
+[Code]
+  
+procedure LicenseLinkClick(Sender: TObject);
+var
+  ErrorCode: Integer;
+begin
+  ShellExec('', 'http://www.diy-fever.com/donate', '', '', SW_SHOW, ewNoWait, 
+    ErrorCode);
+end;
+
+procedure InitializeWizard;
+var donateImage: TBitmapImage;
+begin
+  ExtractTemporaryFile('donate.bmp');
+  
+  donateImage := TBitmapImage.Create(WizardForm);
+  donateImage.Parent:= WizardForm;
+  donateImage.Bitmap.LoadFromFile(ExpandConstant('{tmp}\donate.bmp'));
+  donateImage.Stretch := True;
+  donateImage.Width := 142;
+  donateImage.Height := 27;
+  donateImage.Left := 8;
+  donateImage.Top := WizardForm.InnerPage.Height + 10;
+  donateImage.Cursor := crHand;
+  donateImage.OnClick := @LicenseLinkClick;  
+end;
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<launch4jConfig>
+  <dontWrapJar>true</dontWrapJar>
+  <headerType>gui</headerType>
+  <jar>diylc.jar</jar>
+  <outfile>C:\Users\bancika\Documents\GitHub\diy-layout-creator\diylc\diylc-swing\deploy\diylc-x64.exe</outfile>
+  <errTitle></errTitle>
+  <cmdLine></cmdLine>
+  <chdir>.</chdir>
+  <priority>normal</priority>
+  <downloadUrl>http://java.com/download</downloadUrl>
+  <supportUrl></supportUrl>
+  <stayAlive>false</stayAlive>
+  <restartOnCrash>false</restartOnCrash>
+  <manifest></manifest>
+  <icon>C:\Users\bancika\Documents\GitHub\diy-layout-creator\diylc\diylc-swing\icons\diylc.ico</icon>
+  <classPath>
+    <mainClass>org.diylc.DIYLCStarter</mainClass>
+    <cp>lib</cp>
+  </classPath>
+  <jre>
+    <path>jre17</path>
+    <requiresJdk>false</requiresJdk>
+    <requires64Bit>true</requires64Bit>
+    <minVersion>17</minVersion>
+    <maxVersion></maxVersion>
+    <initialHeapSize>512</initialHeapSize>
+    <maxHeapSize>4096</maxHeapSize>
+    <opt>-Dorg.diylc.scriptRun=true</opt>
+    <opt>-Dfile.encoding=UTF-8</opt>
+    <opt>-javaagent:lib/jar-loader.jar</opt>
+    <opt>--add-opens java.base/java.util=ALL-UNNAMED</opt>
+    <opt>--add-opens java.base/java.lang=ALL-UNNAMED</opt>
+    <opt>--add-opens java.base/java.text=ALL-UNNAMED</opt>
+    <opt>--add-opens java.desktop/java.awt=ALL-UNNAMED</opt>
+    <opt>--add-opens java.desktop/java.awt.font=ALL-UNNAMED</opt>
+    <opt>--add-opens java.desktop/java.awt.geom=ALL-UNNAMED</opt>
+  </jre>
+</launch4jConfig>
@@ -0,0 +1,39 @@
+<?xml version="1.0" encoding="UTF-8"?>
+<launch4jConfig>
+  <dontWrapJar>true</dontWrapJar>
+  <headerType>gui</headerType>
+  <jar>diylc.jar</jar>
+  <outfile>C:\Users\bancika\Documents\GitHub\diy-layout-creator\diylc\diylc-swing\deploy\diylc-x86.exe</outfile>
+  <errTitle></errTitle>
+  <cmdLine></cmdLine>
+  <chdir>.</chdir>
+  <priority>normal</priority>
+  <downloadUrl>http://java.com/download</downloadUrl>
+  <supportUrl></supportUrl>
+  <stayAlive>false</stayAlive>
+  <restartOnCrash>false</restartOnCrash>
+  <manifest></manifest>
+  <icon>C:\Users\bancika\Documents\GitHub\diy-layout-creator\diylc\diylc-swing\icons\diylc.ico</icon>
+  <classPath>
+    <mainClass>org.diylc.DIYLCStarter</mainClass>
+    <cp>lib</cp>
+  </classPath>
+  <jre>
+    <path>jre17</path>
+    <requiresJdk>false</requiresJdk>
+    <requires64Bit>false</requires64Bit>
+    <minVersion>17</minVersion>
+    <maxVersion></maxVersion>
+    <initialHeapSize>512</initialHeapSize>
+    <maxHeapSize>2048</maxHeapSize>
+    <opt>-Dorg.diylc.scriptRun=true</opt>
+    <opt>-Dfile.encoding=UTF-8</opt>
+    <opt>-javaagent:lib/jar-loader.jar</opt>
+    <opt>--add-opens java.base/java.util=ALL-UNNAMED</opt>
+    <opt>--add-opens java.base/java.lang=ALL-UNNAMED</opt>
+    <opt>--add-opens java.base/java.text=ALL-UNNAMED</opt>
+    <opt>--add-opens java.desktop/java.awt=ALL-UNNAMED</opt>
+    <opt>--add-opens java.desktop/java.awt.font=ALL-UNNAMED</opt>
+    <opt>--add-opens java.desktop/java.awt.geom=ALL-UNNAMED</opt>
+  </jre>
+</launch4jConfig>
@@ -0,0 +1,459 @@
+#start-internal
+icon=germany
+#end-internal
+(Building Blocks)|(Bausteine)
+(Favorites)|(Favoriten)
+(Recently Used)|(Zuletzt verwendet)
+180 degrees clockwise|180 Grad
+270 degrees clockwise|270 Grad rechts
+90 degrees clockwise|90 Grad rechts
+A variant with that name already exists. Overwrite?|Es gibt bereits eine Variante mit diesem Namen. Überschreiben?
+About|Programminformationen
+Above|Oberhalb
+Open User Directory|Benutzerverzeichnis öffnen
+Add a Curve|Kurve hinzufügen
+Add Flexible Leads|Flexible Verbindung hinzufügen
+Add Validation Step|Bestätigungsschritt hinzufügen
+All Connected|Alle verbundenen
+Alpha|Deckkraft
+Analyze|Analysieren
+Apply Variant|Variante hinzufügen
+Analyze Guitar Diagrams|Gitarrendiagramme analysieren
+Angle|Winkel
+Anti-Aliasing|Anti-Aliasing
+Arrow Size|Pfeilgröße
+Author|Verfasser
+Auto-Create Pads|Automatische Erstellung von Lötpads
+Auto-Edit Mode|Automatischer Bearbeitungsmodus
+Base|Basis
+Below|Unter
+Blueprint|Entwurf
+Board|Leiterplatte
+Boards|Leiterplatten
+Board Color|Leiterplattenfarbe
+Board Width|Leiterplattenbreite
+Bobbin 1|Wirbel 1
+Bobbin 2|Wirbel 2
+Body|Körper
+Border|Rand
+Border Thickness|Randbreite
+Both|Beide
+Both Sides|Beide Seiten
+Bottom|Unten
+Bottom Left|Unten links
+Bottom Right|Unten rechts
+Bring Forward|Anheben
+Bring Selection to Front|Auswahl ganz nach oben brengen
+Buffer|Zwischenspeicher
+Center|Mitte
+Center Negative|Mittelstift negativ
+Center Positive|Mittelstift positiv
+Center Terminal|Mittelstiftverbindung
+Central|Zentral
+Change Password|Passwort ändern
+Channel|Kanal
+Chassis|Chassis
+Circular|Kreisförmig
+Clear|Löschen
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF|Klicken Sie auf eine Komponente, um einen Bereich hervorzuheben, der direkt oder indirekt mit dem Bereich unter dem Mauszeiger verbunden ist. Um mit der Bearbeitung fortzufahren, muss dieser Modus deaktiviert sein.
+Click on the canvas to create a new %s or press %s to cancel|Klicken Sie auf das Arbeitsblatt, um ein neues %s zu erstellen, oder drücken Sie %s, um abzubrechen
+Click on the canvas to set the %s control point of a new %s or press %s to cancel|Klicken Sie auf das Arbeitsblatt, um den %s Kontrollpunkt eines neuen %s festzulegen, oder drücken Sie %s, um abzubrechen
+Click the lightbulb icon in the bottom-right corner of the window for more info.|Klicken Sie auf das Glühbirnen-Symbol in der unteren rechten Ecke des Fensters, um weitere Informationen zu erhalten
+Click to fetch the most recent public announcement|Klicken Sie hier, um das neuste Update zu erhalten
+Click to show recent changes and updates|Klicken Sie hier, um die letzten Änderungen und Aktualisierungen anzuzeigen
+Click to toggle to the next option|Klicken Sie, um zur nächsten Option zu wechseln
+Coil|Spule
+Coil Border|Spulenrand
+Coil Length|Spulenlänge
+Coil Width|Spulenbreite
+Color|Farbe
+Color 1|Farbe 1
+Color 2|Farbe 2
+Color code|Farbcode
+Columns|Spalten
+Component|Komponente
+Component API|Komponenten API
+Components|Komponenten
+Config|Konfiguration
+Connector|Steckverbinder
+Connector (Mirrored)|Steckverbinder (gespiegelt)
+Connectivity|Konnektivität
+Contacts|Kontakte
+Continuous Creation|Wiederholtes Erstellen
+Coordinate Color|Koordinatenfarbe
+Coordinate Origin|Koordinatenursprung
+Coordinates|Koordinaten
+Copy|Kopieren
+Core|Kern
+Core Border|Kernrand
+Core Thickness|Kerndicke 
+Core Width|Kernbreite 
+Could not create a new file. Check the log for details.|Neue Datei konnte nicht erstellt werden. Überprüfen Sie die Protokolldatei auf Details.
+Could not create component. Check log for details.|Komponente konnte nicht erstellt werden. Überprüfen Sie die Protokolldatei auf Details.
+Could not fetch public announcements.|Öffentliche Ankündigungen konnten nicht abgerufen werden.
+Could not save the project to file. Check the log for details.|Das Projekt konnte nicht in einer Datei gespeichert werden. Überprüfen Sie die Protokolldatei auf Details.
+Could not set component type slot. Check log for details.|Der Steckplatz für den Komponententyp konnte nicht festgelegt werden. Überprüfen Sie das Protokolldatei auf Details. 
+Cover|Abdeckung
+Create B.O.M.|Stückliste erstellen
+Create New Account|Neues Konto erstellen
+Current|Strom
+Cut|Ausschneiden
+Cut Between Holes|Zwischen den Löchern schneiden
+Cut Orientation|Schnittrichtung
+DIP (Mirrored)|DIP (gespiegelt)
+DP3T (Standard 3-Position Strat)|DP3T (Standard Strat 3-Positionen Schalter) 
+DP3T (Standard 5-Position Strat)|DP3T (Standard Strat 5-Positionen Schalter) 
+DP4T (4-Position Tele)|DP4T (Tele 4-Positionen Schalter) 
+Dark|Dunkel
+Dashed|Gestrichelt
+Decimals|Dezimal
+Default|Standard
+Default Font|Standardschriftart 
+Default Font Size|Standardschriftgröße 
+Delete Selection|Auswahl löschen 
+Description|Beschreibung 
+Diameter|Durchmesser
+Directional|Direktionell
+Directly heated|Direkt geheizt
+Display|Anzeigen
+Display Pin #s|Stiftnummern anzeigen
+Dog Ear|‘Dog Ear’
+Dot Spacing|Punktabstand
+Dotted|Gepunktet
+Drag control point(s) of|Ziehe Kontrollpunkt(e) von
+Drag the mouse over the canvas to place a new|Ziehen sie die Maus über das Arbeitsblatt zum plazieren eines neuen
+Dual Rail Humbucker|‘Dual Rail Humbucker‘
+Dual Rods|Doppelstäbe
+Duodecar B12C|Duodecar B12C 
+Duplicate|Duplizieren
+Edges|Randen
+Edit|Bearbeiten
+Edit Project Settings|Projekteinstellungen bearbeiten 
+Edit Selection|Auswahl bearbeiten 
+Electrode Labels|Elektrodenetiketten
+Electro-Mechanical|Elektromechanisch
+Enable Cache Boost|Cache-Boost aktivieren
+End Arrow|Endpfeil
+Enjoying DIYLC? Click here to buy me a coffee :)|Gefällt Ihnen DIYLC? Klicken Sie hier für Kaffee ...
+Error|Fehler
+Error occurred while editing selection. Check the log for details.|Beim Bearbeiten der Auswahl ist ein Fehler aufgetreten. Überprüfen Sie die Protokolldatei für Details.
+Exit|Beenden
+Expand Selection|Auswahl erweitern
+Explicit Dimensions|Explizite Dimensionen 
+Explicit Length|Explizite Länge 
+Explicit Width|Explizite Breite 
+Export Building Blocks|Bausteine exportieren
+Export Grid|Raster exportieren
+Export Variants|Varianten exportieren
+Export to PDF|Als PDF exportieren
+Export to PNG|Als PNG exportieren
+Extra Working Area|Zusätzlicher Arbeitsbereich
+Eyelet color|Ösenfarbe
+FAQ|Häufig gestellte Fragen
+File|Datei
+Fill|Füllen
+Filtertron|Filtertron
+Find|Finden
+Five|Fünf
+Flip|Umkehren
+Folded|Gefaltet
+Font|Schriftart
+Font Bold|Fettschrift
+Font Italic|Kursivschrift
+Font Size|Schriftgröße
+Font Size Override|Schriftgröße (Üb.)
+Four|Vier
+Full|Voll 
+Fuse|Sicherung 
+Generate DIYLC Netlist|DIYLC-Netzliste erstellen 
+Generate Spice Netlist|Spice-Netzliste erstellen 
+Grid|Raster
+Grid Spacing|Rasterabstand
+Group Selection|Auswahl gruppieren
+Guitar|Gitarre
+Half|Halb
+Hardware Acceleration|Hardwarebeschleunigung
+Heaters|Heizung
+Height|Höhe
+Help|Hilfe
+Hi-Quality Rendering|Hochwertiges Rendering
+Highlight Connected Areas|Verbundene Bereiche markieren
+Hole|Loch 
+Hole Size|Lochgröße 
+Hole Spacing|Lochabstand 
+Holes per strip|Löcher pro Streifen
+Horizontal|Horizontal 
+Horizontal Alignment|Horizontale Ausrichtung 
+Horizontal Large|Horizontal breit 
+Horizontal Medium|Horizontales medium 
+Horizontal Small 1|Horizontal klein 1 
+Horizontal Small 2|Horizontal klein 2 
+Horizontal X-Small|Horizontal extra klein 
+Humbucking|‘Humbucking‘
+If this box is checked application will use the current value as a<br>default when creating new components of the same type|Wenn dieses Kontrollkästchen aktiviert ist, verwendet die Anwendung den aktuellen Wert als <br> Standard, wenn neue Komponenten des selben Typs erstellt werden 
+Image|Bild
+Immediate Only|Nur sofort 
+Import|Importieren 
+Import Building Blocks|Bausteine importieren 
+Import Variants|Varianten importieren 
+In-Line D-44|Inline D-44
+In-line|Inline
+Indent|Einrücken 
+Information|Informationen 
+Input error for "%s": %s|Eingabefehler für " %s": %s 
+Insert Image|Bild einfügen
+Inside color|Innenfarbe
+Integration|Integration
+Invert polarity|Polarität umkehren
+Label|Beschriftung
+Label Color|Beschriftungsfarbe
+Label Orientation|Beschriftungsrichtung
+Label Position|Beschriftungposition
+Labels|Beschriftungen
+Language|Sprache
+Language selection will be applied after the application is restarted.|Die gewählte Sprache wird nach Neustart der Anwendung verwendet.
+Layer|Ebene
+Layers|Ebenen
+Lead Color|Leitungfarbe
+Lead Count|Leitungsanzahl
+Lead Length|Leitungslänge
+Lead Spacing|Leitungsabstand
+Left|Links
+Left-to-Right|Von links nach rechts
+Left click to instantiate this component, right click for more options|Klicken Sie mit der linken Maustaste, um diese Komponente zu instanziieren, oder klicken Sie mit der rechten Maustaste, um weitere Optionen anzuzeigen
+Legs|Anschlüsse
+Length|Länge
+Letters|Buchstaben
+Light|Hell
+Lin|Lin
+Load From File|Aus Datei laden
+Loadline Editor|Kennliniendiagramm
+Lock|Sperren
+Log|Log
+Log In|Anmelden
+Log Out|Abmelden
+Lug Size|Lötpadgröße
+Lugs|Lötpad
+Make a Donation|Spenden
+Manage Account|Konto verwalten
+Manage My Uploads|Meine Uploads verwalten
+Mark Common Lugs|Verbundene Lötpads markieren
+Marker|Markierung
+Max Current (mA)|Max Strom (mA)
+Max Dissipation (W)|Max Verlustleistung (W)
+Max Voltage (V)|Max Spannung (V)
+Mini|Mini
+Miniature|Miniatur
+Mirror Horizontally|Horizontal spiegeln
+Mirror Selection|Auswahl spiegeln
+Mirror Vertically|Vertikal spiegeln
+Mirroring operation will change the circuit. Do you want to continue?|Spiegelung wird die Schaltung verändern. Möchten Sie fortfahren?
+Misc|Sonstiges
+Model|Modell
+Mono|Mono
+Mount|Befestigung
+Mounting Lugs|Befestigungslaschen
+Mouse Wheel Zoom|Zoomrad
+Moveable Label|Bewegliche Beschriftung
+Name|Name 
+Nand|NAND 
+Negative|Negativ 
+New|Neu 
+New version available|Neue Version verfügbar 
+No new public announcements available.|Keine neuen öffentlichen Ankündigungen verfügbar. 
+No|Nein 
+None|Nichts 
+North|Norden 
+Noval B9A|Noval B9A
+Nudge|Stupsen
+Numbers|Nummern
+Nut|Mutter
+Octal|Oktal
+Offset|Versatz
+One Side|Eine Seite
+Open|Öffnen
+Opposing Points|Gegenüberliegende Punkte
+Orientation|Orientierung
+Outer Foil|Äußere Folie
+Outer Foil Mark|Äußere Folienmarkierung
+Outline Mode|Umrissmodus
+Outside|Außerhalb
+Oval horizontal|Horizontales Oval
+Oval vertical|Vertikales Oval
+Pad Color|Lötpad-Farbe
+Passive|Passiv 
+Paste|Einfügen 
+Pin Arrangement|Stiftanordnung
+Pin Color|Stiftfarbe
+Pin Spacing|Stiftabstand
+Pinout|Stiftbelegung
+Pins|Stifte
+Play Test|Test abspielen
+Plugin API|Plugin-API
+Point Count|Punktezählung
+Polarity|Polarität
+Polarized|Polarisiert 
+Pole Color|Polfarbe
+Pole Pieces|Polschuh
+Pole Pieces 1|Polschuh 1
+Pole Pieces 2|Polschuh 2
+Positions|Positionen 
+Positive|Positiv 
+Power Rating|Nennleistung 
+Power Strip|Steckdosenleiste
+Primary CT|Primärer Mittelabgriff
+Print...|Drucken...
+Project Cloud|Projekt Cloud
+Public Announcement|Öffentliche Ankündigung
+Radius|Radius
+Rail|Schiene
+Recent Files|Letzte Dateien
+Recent Updates|Letzte Updates
+Redo|Nochmal ausführen
+Renumber On Paste|Beim Einfügen umnummerieren
+Renumber Selection|Auswahl neu nummerieren
+Resistance|Widerstand
+Rev log|Negativ logarithmisch
+Reverse (standing)|Umgedreht
+Right|Rechts
+Rim|Seitenrand
+Rods|Stäbe
+Rotate Clockwise|Im Uhrzeigersinn drehen 
+Rotate Counterclockwise|Gegen den Uhrzeigersinn drehen 
+Rotate Selection|Auswahl drehen
+Round|Runde
+Round package A|Rundes Paket A
+Round package B|Rundes Paket B
+Row Spacing|Zeilenabstand 
+Rows|Zeilen 
+Ruler Inch Subdivision...|Zoll-Unterteilung auf Lineal...
+Same Type Only|Nur derselbe Typ
+Save|Speichern 
+Save As|Speichern unter 
+Save as Variant|Als Variante speichern
+Save to File|Speichern
+Scale|Skalieren
+Schematic Symbols|Schematische Symbole
+Screws|Schrauben
+Save as Building Block|Als Baustein speichern
+Select|Wählen
+Selection|Auswahl
+Selection Size|Auswahl Größe
+Selection is empty.|Auswahl ist leer.
+Search The Cloud|In der Cloud suchen
+Searchable Tree|Durchsuchbarer Baum
+Secondary CT|Sekundäre Mittelabgriff
+Select All|Alle auswählen
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?|Ausgewählte Komponente(n) haben den Boden ihrer Schicht erreicht. Sollen sie weiter abgesenkt werden? 
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?|Ausgewählte Komponente(n) haben den oberen Rand ihrer Schicht erreicht. Sollen sie weiter angehoben werden?
+Selection contains components that cannot be mirrored. Do you want to exclude them?|Die Auswahl enthält Komponenten, die nicht gespiegelt werden können. Wollen Sie diese ausschließen?
+Save as Building Block|Als Baustein speichern
+Save To File|Speichern
+Select|Wählen
+Selection contains components that cannot be rotated. Do you want to exclude them?|Die Auswahl enthält Komponenten, die nicht gedreht werden können. Wollen Sie diese ausschließen?
+Semiconductors|Halbleiter
+Send Backward|Absenken
+Send Selection to Back|Auswahl nach den Boden senden
+Seven|Sieben
+Shaft Down|Achse nach unten
+Shaft Up|Achse nach oben
+Shape|Form 
+Shapes|Formen 
+Show Grid|Raster anzeigen
+Show Rulers|Lineale anzeigen
+Shroud|Wanne
+Shrouded|Abgeschirmt
+Single Rail|Einzelschiene
+Single Rods|Einzelstäbe
+Size|Größe
+Sizing Mode|Größenmodus 
+Small-button B7G|Miniatur 7-pol 
+Smooth|Glätten
+Snap To|Einrasten zu
+Soap Bar|
+Solid|Ununterbrochen
+South|Süden 
+Spacing|Abstand 
+Square|Quadrat
+Square BR-3|BR-3 Sockel
+Standard|Standard
+Start Arrow|Pfeilanfang
+Start Recording|Aufnahme starten
+Stereo|Stereo 
+Sticky Points|Klebepunkte
+Stop Recording|Aufnahme beenden
+Stratocaster|Stratocaster
+Strip Color|Bandfarbe
+Stripe|Streifen 
+Stripe 1|Streifen 1 
+Stripe 2|Streifen 2 
+Stripe Color|Streifenfarbe
+Stripe Color 1|Streifenfarbe 1 
+Stripe Color 2|Streifenfarbe 2 
+Style|Stil
+Submit a Bug|Fehler melden
+Suppressor grid|Bremsgitter
+Switched|Geschaltet 
+Switches|Schalter 
+Tab|Befestigungslasche
+Tab Border|Befestigungslasche rand
+Tabbed Toolbar|Registerkarten-Symbolleiste 
+Taper|Widerstandsverlauf
+Telecaster|Telecaster
+Terminal Spacing|Klemmenabstand
+Terminals|Klemmen
+Test|Test 
+Text|Text 
+Text Color|Textfarbe 
+Theme|Thema 
+There are unsaved changes. Would you like to save them?|Es gibt ungespeicherte Änderungen. Möchten Sie sie speichern? 
+Thickness|Dicke
+Three|Drei
+Through Hole|Durchsteckmontage
+Tick|Abstufung
+Title|Titel
+Toolbox|Werkzeugkasten
+Top|Oben
+Top Lead|Oberste Leitung
+Top Left|Oben links 
+Top Right|Oben rechts 
+Top-to-Bottom|Von oben nach unten 
+Trace|Leiterbahn
+Trace Color|Leiterbahn Farbe
+Trace Mask|Leiterbahn Maske
+Transform Selection|Auswahl transformieren
+Triangle|Dreieck 
+Tubular|Rohrförmig 
+Tubes|Röhren
+Two|Zwei
+Type|Typ 
+Ultra-miniature|Ultra-Miniatur 
+Underside Pad Color|Unterseite Pad Farbe
+Underside Trace Color|Unterseite Leiterbahn Farbe
+Undo|Rückgängig machen
+Ungroup Selection|Auswahl auflösen
+Unit|Maßeinheit
+Unlock|Freischalten
+Update Axis|Achse aktualisieren
+Upload A Project|Ein Projekt hochladen
+User Manual|Benutzerhandbuch 
+Value|Wert
+Version history is not available.|Der Versionsverlauf ist nicht verfügbar.
+Vertical|Vertikal 
+Vertical Alignment|Vertikale Ausrichtung 
+Vertical Inline|Vertikale Inline 
+Vertical Offset 1|Vertikaler Versatz 1 
+Vertical Offset 2|Vertikaler Versatz 2 
+View|Anzeigen 
+Visible|Sichtbar 
+Voltage|Spannung
+Wafer|Wafer
+Warning|Warnung 
+Width|Breite 
+Winding Spacing|Spule afstand
+X-axis|X-Achse 
+Y-axis|Y-Achse 
+Zoom|Vergrößern
+base of 10|Zehntel
+base of 2|Achtel
+hold %s and drag to unstick from|Halten Sie X gedrückt und ziehen Sie, zum lösen von
@@ -0,0 +1,465 @@
+#start-internal
+icon=usa
+#end-internal
+(Building Blocks)
+(Favorites)
+(Recently Used)
+180 degrees clockwise
+270 degrees clockwise
+90 degrees clockwise
+A variant with that name already exists. Overwrite?
+About
+Above
+Access User Files
+Add Flexible Leads
+Add Validation Step
+All Connected
+Alpha
+Analyze
+Analyze Guitar Diagrams
+Angle
+Anti-Aliasing
+Arrow Size
+Author
+Auto-Create Pads
+Auto-Edit Mode
+Base
+Below
+Blueprint
+Board
+Boards
+Board Color
+Board Width
+Bobbin 1
+Bobbin 2
+Body
+Border
+Border Thickness
+Both
+Both Sides
+Bottom
+Bottom Left
+Bottom Right
+Bracket
+Bring Forward
+Bring Selection to Front
+Buffer
+Center
+Center Negative
+Center Positive
+Center Terminal
+Central
+Change Password
+Channel
+Chassis
+Check Trace Proximity
+Circular
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF
+Click on the canvas to create a new %s or press %s to cancel
+Click on the canvas to set the %s control point of a new %s or press %s to cancel
+Click the lightbulb icon in the bottom-right corner of the window for more info.
+Click to fetch the most recent public announcement
+Click to show recent changes and updates
+Click to toggle to the next option
+Coil
+Coil Border
+Coil Length
+Coil Width
+Color
+Color 1
+Color 2
+Color code
+Column Spacing
+Columns
+Component
+Component API
+Components
+Config
+Connector
+Connector (Mirrored)
+Connectivity
+Contacts
+Continuous Creation
+Coordinate Color
+Coordinate Origin
+Coordinates
+Copy
+Core
+Core Border
+Core Thickness
+Core Width
+Could not create a new file. Check the log for details.
+Could not create component. Check log for details.
+Could not fetch public announcements.
+Could not save the project to file. Check the log for details.
+Could not set component type slot. Check log for details.
+Cover
+Create B.O.M.
+Create New Account
+Current
+Cut
+Cut Between Holes
+Cut Orientation
+DIP (Mirrored)
+DP3T (Standard 3-Position Strat)
+DP3T (Standard 5-Position Strat)
+DP4T (4-Position Tele)
+Dark
+Dashed
+Decimals
+Default
+Default Font
+Default Font Size
+Delete Selection
+Description
+Diameter
+Directional
+Directly heated
+Display
+Display Pin #s
+Dog Ear
+Dot Spacing
+Donate
+Dotted
+Drag control point(s) of
+Drag the mouse over the canvas to place a new
+Dual Rail Humbucker
+Dual Rods
+Duodecar B12C
+Duplicate
+Edges
+Edit
+Edit Project Settings
+Edit Selection
+Electrode Labels
+Electro-Mechanical
+Enable Cache Boost
+End Arrow
+Enjoying DIYLC? Click here to buy me a coffee :)
+Error
+Error occurred while editing selection. Check the log for details.
+Exit
+Expand Selection
+Explicit Dimensions
+Explicit Length
+Explicit Width
+Export Building Blocks
+Export Grid
+Export Variants
+Export to PDF
+Export to PNG
+Extra Working Area
+Eyelet color
+FAQ
+File
+Filtertron
+Find
+Five
+Flip
+Folded
+Font
+Font Bold
+Font Italic
+Font Size
+Font Size Override
+Four
+Full
+Fuse
+Generate DIYLC Netlist
+Generate Spice Netlist
+Grid
+Grid Spacing
+Group Selection
+Guitar
+Half
+Hardware Acceleration
+Heaters
+Height
+Help
+Hi-Quality Rendering
+Highlight Connected Areas
+Hole
+Hole Size
+Hole Spacing
+Hole size
+Holes per strip
+Horizontal
+Horizontal Alignment
+Horizontal Large
+Horizontal Medium
+Horizontal Small 1
+Horizontal Small 2
+Horizontal X-Small
+Humbucking
+If this box is checked application will use the current value as a<br>default when creating new components of the same type
+Image
+Immediate Only
+Import
+Import Building Blocks
+Import Netlist
+Import Variants
+In-Line D-44
+In-line
+Indent
+Information
+Inline
+Input error for "%s": %s
+Inside color
+Integration
+Invert polarity
+Label
+Label Color
+Label Orientation
+Label Position
+Labels
+Language
+Language selection will be applied after the application is restarted.
+Layer
+Layers
+Lead Color
+Lead Count
+Lead Length
+Lead Spacing
+Left
+Left-to-Right
+Left click to instantiate this component, right click for more options
+Legs
+Length
+Letters
+Light
+Lock
+Log In
+Log Out
+Look for
+Lug Size
+Lugs
+Make a Donation
+Manage Account
+Manage My Uploads
+Mark Common Lugs
+Marker
+Marker Size
+Mini
+Miniature
+Mirror Horizontally
+Mirror Selection
+Mirror Vertically
+Mirroring operation will change the circuit. Do you want to continue?
+Misc
+Model
+Mono
+Mount
+Mounting Lugs
+Mouse Wheel Zoom
+Moveable Label
+Name
+Negative
+New
+New version available
+No new public announcements available.
+No
+None
+North
+Noval B9A
+Nudge
+Numbers
+Nut
+Octal
+Offset
+One Side
+Open
+Opposing Points
+Orientation
+Outer Foil
+Outer Foil Mark
+Outline Mode
+Outside
+Oval horizontal
+Oval vertical
+Pad Color
+Panel
+Passive
+Paste
+Pin Arrangement
+Pin Color
+Pin Spacing
+Pinout
+Pins
+Play Test
+Plugin API
+Point Count
+Polarity
+Polarized
+Pole Color
+Pole Pieces
+Pole Pieces 1
+Pole Pieces 2
+Positions
+Positive
+Power Rating
+Power Strip
+Primary CT
+Print...
+Project Cloud
+Public Announcement
+Radius
+Rail
+Recent Files
+Recent Updates
+Redo
+Renumber On Paste
+Renumber Selection
+Resistance
+Reverse (standing)
+Right
+Rim
+Rods
+Rotate Clockwise
+Rotate Counterclockwise
+Rotate Selection
+Round
+Round WOG A
+Round WOG B
+Row Spacing
+Rows
+Ruler Inch Subdivision...
+Same Type Only
+Save
+Save As
+Save as Variant
+Scale
+Schematic Symbols
+Screws
+Selection
+Selection Size
+Selection is empty.
+Search The Cloud
+Searchable Tree
+Secondary CT
+Select All
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?
+Selection contains components that cannot be mirrored. Do you want to exclude them?
+Selection contains components that cannot be rotated. Do you want to exclude them?
+Semiconductors
+Send Backward
+Send Selection to Back
+Seven
+Shaft Down
+Shaft Up
+Shape
+Shapes
+Show Bracket
+Show Grid
+Show Rulers
+Shroud
+Shrouded
+Single Rail
+Single Rods
+Size
+Sizing Mode
+Small-button B7G
+Smooth
+Snap To
+Soap Bar
+Solid
+South
+Spacing
+Square
+Square BR-3
+Standard
+Start Arrow
+Start Recording
+Stereo
+Sticky Points
+Stop Recording
+Stratocaster
+Strip Color
+Stripe
+Stripe 1
+Stripe 2
+Stripe Color
+Stripe Color 1
+Stripe Color 2
+Style
+Submit a Bug
+Suppressor grid
+Switched
+Switches
+Tab
+Tab Border
+Tabbed Toolbar
+Taper
+Telecaster
+Terminal Spacing
+Terminals
+Test
+Text
+Text Color
+Theme
+There are unsaved changes. Would you like to save them?
+Thickness
+Three
+Through Hole
+Tick
+Tick Width
+Ticks
+Title
+Toolbox
+Top
+Top Lead
+Top Left
+Top Right
+Top-to-Bottom
+Trace
+Trace Color
+Trace Mask
+Transform Selection
+Triangle
+Tubular
+Tubes
+Two
+Type
+Ultra-miniature
+Underside Pad Color
+Underside Trace Color
+Undo
+Ungroup Selection
+Unit
+Upload A Project
+User Manual
+Value
+Version history is not available.
+Vertical
+Vertical Alignment
+Vertical Inline
+Vertical Offset 1
+Vertical Offset 2
+View
+Visible
+Voltage
+Wafer
+Warning
+Width
+Winding Spacing
+Wiring
+X-axis
+Y-axis
+Zoom
+base of 10
+base of 2
+hold %s and drag to unstick from
+Add a Curve
+Clear
+Insert Image
+Load From File
+Loadline Editor
+Max Current (mA)
+Max Dissipation (W)
+Max Voltage (V)
+Save To File
+Update Axis
+Apply Variant
+Save as Building Block
+Select
+Unlock
@@ -0,0 +1,460 @@
+#start-internal
+icon=spain
+#end-internal
+(Building Blocks)|(Bloques)
+(Favorites)|(Favoritos)
+(Recently Used)|(Últimos usados)
+180 degrees clockwise|180 grados en Sentido Horario
+270 degrees clockwise|270 grados en Sentido Horario
+90 degrees clockwise|90 grados en Sentido Horario
+A variant with that name already exists. Overwrite?|Ya existe una variante con ese nombre. ¿Sobrescribir?
+About|Acerca de
+Above|Encima
+Access User Files|Acceder a Archivos de Usuario
+Add Flexible Leads|Agregar Cables Flexibles
+Add Validation Step|Agregar Paso de Validación 
+All Connected|Todos conectados
+Alpha|Opacidad
+Analyze|Analizar
+Analyze Guitar Diagrams|Analizar Diagramas de Guitarra
+Angle|Ángulo
+Anti-Aliasing|Suavizado
+Arrow Size|Tamaño de Flecha
+Author|Autor
+Auto-Create Pads|Creación Automática de Pads
+Auto-Edit Mode|Modo de Edición Automática
+Base|Base
+Below|Debajo
+Blueprint|Cianotipo
+Board|Placa
+Boards|Placas
+Board Color|Color de Placa
+Board Width|Ancho de Placa
+Bobbin 1|Bobina 1
+Bobbin 2|Bobina 2
+Body|Cuerpo
+Border|Borde
+Border Thickness|Espesor del Borde
+Both|Ambos
+Both Sides|Ambos Lados
+Bottom|Abajo
+Bottom Left|Esquina Inferior Izquierda
+Bottom Right|Esquina Inferior Derecha
+Bring Forward|Poner Encima
+Bring Selection to Front|Traer Selección al Frente 
+Buffer|Buffer
+Center|Centrar
+Center Negative|Centro Negativo
+Center Positive|Centro Positivo
+Center Terminal|Terminal Central
+Central|Central
+Change Password|Cambiar la Contraseña
+Channel|Canal
+Chassis|Chasis
+Circular|Circular
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF|Haga clic en un componente para resaltar el área conectada directa o indirectamente al área debajo del cursor. Para continuar editando, este modo necesita estar desactivado
+Click on the canvas to create a new %s or press %s to cancel|Haga clic sobre el área de trabajo para crear un nuevo %s o presione %s para cancelar
+Click on the canvas to set the %s control point of a new %s or press %s to cancel|Haga clic sobre el área de trabajo para establecer el %s punto de control de un nuevo %s o presione %s para cancelar
+Click the lightbulb icon in the bottom-right corner of the window for more info.|Haga clic en el icono de la bombilla en la esquina inferior derecha de la ventana para obtener más información.
+Click to fetch the most recent public announcement|Haga clic para obtener el anuncio público más reciente.
+Click to show recent changes and updates|Haga clic para ver cambios y actualizaciones recientes
+Click to toggle to the next option|Haga clic para cambiar a la siguiente opción
+Coil|Bobina
+Coil Border|Borde de la bobina
+Coil Length|Longitud de la bobina
+Coil Width|Ancho de la bobina
+Color|Color
+Color 1|Color 1
+Color 2|Color 2
+Color code|Código de color
+Columns|Columnas
+Component|Componente
+Component API|API de componentes
+Components|Componentes
+Config|Configuración
+Connector|Conector
+Connector (Mirrored)|Conector (reflejado)
+Connectivity|Conectividad
+Contacts|Contactos
+Continuous Creation|Creación Continua
+Coordinate Color|Color de Coordenadas
+Coordinate Origin|Origen de Coordenadas
+Coordinates|Coordenadas
+Copy|Copiar
+Core|Núcleo
+Core Border|Borde del núcleo
+Core Thickness|Espesor del núcleo
+Core Width|Ancho del núcleo
+Could not create a new file. Check the log for details.|No se pudo crear un nuevo archivo. Verifique el registro para más detalles.
+Could not create component. Check log for details.|No se pudo crear el componente. Verifique el registro para más detalles.
+Could not fetch public announcements.|No se pudieron obtener anuncios públicos.
+Could not save the project to file. Check the log for details.|No se pudo guardar el proyecto a un archivo. Verifique el registro para más detalles.
+Could not set component type slot. Check log for details.|No se pudo establecer la ranura de tipo de componente. Verifique el registro para más detalles.
+Cover|Cubrir
+Create B.O.M.|Crear Lista de Materiales
+Create New Account|Crear una nueva cuenta
+Current|Actual
+Cut|Cortar
+Cut Between Holes|Cortar entre agujeros
+Cut Orientation|Orientación de corte
+DIP (Mirrored)|DIP (reflejado)
+DP3T (Standard 3-Position Strat)|DP3T (3-posiciones Standard de Stratocaster)
+DP3T (Standard 5-Position Strat)|DP3T (5-posiciones Standard de Stratocaster)
+DP4T (4-Position Tele)|DP4T (4-posiciones Telecaster)
+Dark|Oscuro
+Dashed|Rayado
+Decimals|Decimales
+Default|Por Defecto
+Default Font|Fuente predeterminada
+Default Font Size|Tamaño de fuente predeterminado
+Delete Selection|Eliminar selección
+Description|Descripción
+Diameter|Diámetro
+Directional|Direccional
+Directly heated|Caldeo Directo
+Display|Mostrar
+Display Pin #s|Mostrar Numeración de Pines
+Dog Ear|Dog Ear
+Dot Spacing|Espaciado de puntos
+Dotted|Punteado
+Drag control point(s) of|Arrastre punto(s) de control de
+Drag the mouse over the canvas to place a new|Arrastre el puntero sobre el área de trabajo para colocar uno nuevo
+Dual Rail Humbucker|Humbucker de Doble Rail
+Dual Rods|Barras Dobles
+Duodecar B12C|Duodecar B12C
+Duplicate|Duplicar
+Edges|Bordes
+Edit|Editar
+Edit Project Settings|Editar Configuración del Proyecto
+Edit Selection|Editar Selección
+Electrode Labels|Etiquetas de Electrodos
+Electro-Mechanical|Electromecánico
+Enable Cache Boost|Habilitar el Refuerzo del Caché
+End Arrow|Flecha Final
+Enjoying DIYLC? Click here to buy me a coffee :)|¿Estás disfrutando de DIYLC? Haz clic aquí para invitarme a un café :)
+Error|Error
+Error occurred while editing selection. Check the log for details.|Se produjo un error al editar la selección. Verifique el registro para más detalles.
+Exit|Salida
+Expand Selection|Expandir Selección
+Explicit Dimensions|Dimensiones Explícitas
+Explicit Length|Longitud Explícita
+Explicit Width|Ancho Explícito
+Export Building Blocks|Exportar Bloques
+Export Grid|Exportar Cuadrícula
+Export Variants|Exportar Variantes
+Export to PDF|Exportar a PDF
+Export to PNG|Exportar a PNG
+Extra Working Area|Área Extra de Trabajo
+Eyelet color|Color de Ojete
+FAQ|Preguntas Más Frecuentes
+File|Archivo
+Fill|Llenar
+Filtertron|Filtertron
+Find|Encontrar
+Five|Cinco
+Flip|Voltear
+Folded|Tumbado
+Font|Fuente
+Font Bold|Negrita
+Font Italic|Itálica
+Font Size|Tamaño de fuente
+Font Size Override|Tamaño de fuente (an.)
+Four|Cuatro
+Full|Lleno
+Fuse|Fusible
+Generate DIYLC Netlist|Generar Lista de Redes DIYLC 
+Generate Spice Netlist|Generar Lista Especial de Redes
+Grid|Cuadrícula
+Grid Spacing|Espaciado de la Cuadrícula
+Group Selection|Selección de Grupo
+Guitar|Guitarra
+Half|Mitad
+Hardware Acceleration|Aceleración de Hardware
+Heaters|Calentadores
+Height|Altura
+Help|Ayuda
+Hi-Quality Rendering|Renderizado de Alta Calidad
+Highlight Connected Areas|Destacar Áreas Conectadas
+Hole|Agujero
+Hole Size|Tamaño del Agujero
+Hole Spacing|Espaciado de Agujeros
+Hole size|Tamaño del agujero
+Holes per strip|Agujeros por cada Tira
+Horizontal|Horizontal
+Horizontal Alignment|Alineación horizontal
+Horizontal Large|Horizontal Grande
+Horizontal Medium|Horizontal Medio
+Horizontal Small 1|Horizontal Pequeño 1
+Horizontal Small 2|Horizontal Pequeño 2
+Horizontal X-Small|Horizontal Extra Pequeño
+Humbucking|Humbucking
+If this box is checked application will use the current value as a<br>default when creating new components of the same type|Si esta casilla está marcada, la aplicación usará el valor actual como <b>valor predeterminado para crear nuevos componentes del mismo tipo.
+Image|Imagen
+Immediate Only|Solo Inmediato
+Import|Importar
+Import Building Blocks|Importar Bloques
+Import Variants|Importar variantes
+In-Line D-44|En Línea D-44
+In-line|En línea
+Indent|Hendidura
+Information|Información
+Inline|En línea
+Input error for "%s": %s|Error de entrada para "%s": %s
+Inside color|Color interior
+Integration|Integración
+Invert polarity|Polaridad invertida
+Label|Etiqueta
+Label Color|Color de Etiqueta
+Label Orientation|Orientación de Etiqueta
+Label Position|Posición de Etiqueta
+Labels|Etiquetas
+Language|Idioma
+Language selection will be applied after the application is restarted.|La selección del idioma se aplicará después de reiniciar la aplicación.
+Layer|Capa
+Layers|Capas
+Lead Color|Color del Terminal
+Lead Count|Cantidad de Conectores
+Lead Length|Longitud de Conectores 
+Lead Spacing|Espaciado de Conectores 
+Left|Izquierda
+Left-to-Right|De Izquierda a Derecha
+Left click to instantiate this component, right click for more options|Haga clic izquierdo para crear una instancia de este componente, haga clic derecho para obtener más opciones
+Legs|Patas
+Length|Longitud
+Letters|Letras
+Light|Claro
+Lin|Lineal
+Lock|Bloquear
+Log|Logarítmico
+Log In|Iniciar Sesión
+Log Out|Cerrar Sesión
+Look for|Buscar
+Lug Size|Tamaño de Terminal
+Lugs|Terminales
+Make a Donation|Haz una Donación
+Manage Account|Administrar Cuenta
+Manage My Uploads|Administrar mis Subidas
+Mark Common Lugs|Marcar Terminales Comunes
+Marker|Marcador
+Mini|Mini
+Miniature|Miniatura
+Mirror Horizontally|Invertir Horizontalmente
+Mirror Selection|Selección de Inversión
+Mirror Vertically|Invertir Verticalmente
+Mirroring operation will change the circuit. Do you want to continue?|La operación de inversión cambiará el circuito. ¿Desea continuar?
+Misc|Miscelánea
+Model|Modelo
+Mono|Mono
+Mount|Montar
+Mounting Lugs|Terminales de Montaje
+Mouse Wheel Zoom|Zoom con la Rueda del Ratón
+Moveable Label|Etiqueta Movible
+Name|Nombre
+Nand|Nand
+Negative|Negativo
+New|Nuevo
+New version available|Nueva versión disponible
+No new public announcements available.|No hay nuevos anuncios públicos disponibles.
+No|No
+None|Nada 
+North|Norte
+Noval B9A|Noval B9A
+Nudge|Empujar
+Numbers|Números
+Nut|Tuerca
+Octal|Octal
+Offset|Desplazamiento
+One Side|Un lado
+Open|Abierto
+Opposing Points|Puntos de oposición
+Orientation|Orientación
+Outer Foil|Lámina externa
+Outer Foil Mark|Marca de lámina externa
+Outline Mode|Modo Esquemático
+Outside|Extremos
+Oval horizontal|Óvalo horizontal
+Oval vertical|Óvalo vertical
+Pad Color|Color del Pad
+Passive|Pasivo
+Paste|Pegar
+Pin Arrangement|Ordenamiento de Pines
+Pin Color|Color del Pin
+Pin Spacing|Espaciado de Terminales
+Pin spacing|Espaciado de Terminales
+Pinout|Patillaje
+Pins|Pines
+Play Test|Hacer prueba
+Plugin API|Complemento API
+Point Count|Total de Puntos
+Polarity|Polaridad
+Polarized|Polarizado
+Pole Color|Color del Polo
+Pole Pieces|Piezas Polares
+Pole Pieces 1|Piezas Polares 1
+Pole Pieces 2|Piezas Polares 2
+Positions|Posiciones
+Positive|Positivo
+Power Rating|Potencia Nominal
+Power Strip|Regleta
+Primary CT|Toma Central en primario
+Print...|Imprimir...
+Project Cloud|Proyectos en la Nube
+Public Announcement|Anuncio Público
+Radius|Radio
+Rail|Rail
+Recent Files|Archivos Recientes
+Recent Updates|Actualizaciones Recientes
+Redo|Rehacer
+Renumber On Paste|Renumerar al Pegar
+Renumber Selection|Renumerar Selección
+Resistance|Resistencia
+Rev log|Logarítmico Invertido
+Reverse (standing)|Invertido (de pie)
+Right|Derecha
+Rim|Aro
+Rods|Barras
+Rotate Clockwise|Rotar en Sentido Horario
+Rotate Counterclockwise|Rotar en Sentido Antihorario
+Rotate Selection|Rotar Selección
+Round|Redondo
+Round WOG A|Redondo WOG A 
+Round WOG B|Redondo WOG B
+Row Spacing|Distancia entre filas
+Rows|Filas
+Ruler Inch Subdivision...|Subdivisión de Reglas en Pulgadas...
+Same Type Only|Solo el Mismo Tipo
+Save|Guardar
+Save As|Guardar como
+Save as Variant|Guardar como Variante
+Scale|Escala
+Schematic Symbols|Símbolos Esquemáticos
+Screws|Tornillos
+Selection|Selección
+Selection Size|Tamaño de Selección
+Selection is empty.|La selección está vacía.
+Search The Cloud|Búsqueda en la Nube
+Searchable Tree|Árbol de Búsqueda
+Secondary CT|Toma Central en Secundario
+Select All|Seleccionar Todo
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?|Componente(s) seleccionado(s) está(n) en el fondo de su capa. ¿Desea forzar la selección hacia atrás
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?|Componente(s) seleccionado(s) está(n) en la parte superior de su capa. ¿Desea forzar la selección hacia el frente?
+Selection contains components that cannot be mirrored. Do you want to exclude them?|La selección contiene componentes que no se pueden invertir. ¿Desea excluirlos?
+Selection contains components that cannot be rotated. Do you want to exclude them?|La selección contiene componentes que no se pueden rotar. ¿Desea excluirlos?
+Semiconductors|Semiconductores
+Send Backward|Enviar Atrás
+Send Selection to Back|Enviar Selección Atrás
+Seven|Siete
+Shaft Down|Eje Abajo
+Shaft Up|Eje Arriba
+Shape|Forma
+Shapes|Formas
+Show Grid|Mostrar Cuadrícula
+Show Rulers|Mostrar Reglas
+Shroud|Envoltura
+Shrouded|Con Envoltura
+Single Rail|Un Rail
+Single Rods|Barras Simples
+Size|Tamaño
+Sizing Mode|Modo de Dimensionamiento
+Small-button B7G|Zócalo de Botón pequeño B7G
+Smooth|Suave
+Snap To|Ajustarse a
+Soap Bar|Soap Bar
+Solid|Sólido
+South|Sur
+Spacing|Espaciado
+Square|Cuadrado
+Square BR-3|Cuadrado BR-3
+Standard|Estándar
+Start Arrow|Flecha de Inicio
+Start Recording|Iniciar Grabación
+Stereo|Estéreo
+Sticky Points|Puntos Agrupados
+Stop Recording|Parar Grabación
+Stratocaster|Stratocaster
+Strip Color|Color de la Tira
+Stripe|Raya 
+Stripe 1|Raya 1
+Stripe 2|Raya 2
+Stripe Color|Color de Raya
+Stripe Color 1|Color de Raya 1
+Stripe Color 2|Color de Raya 2
+Style|Estilo
+Submit a Bug|Reportar un Fallo
+Suppressor grid|Rejilla Supresora
+Switched|Conmutado
+Switches|Interruptores
+Tab|Pestaña
+Tab Border|Borde de pestaña
+Tabbed Toolbar|Barra de Herramientas con Pestañas
+Taper|Respuesta (Ley)
+Telecaster|Telecaster
+Terminal Spacing|Espaciado de Terminal
+Terminals|Terminales
+Test|Prueba
+Text|Texto
+Text Color|Color del Texto
+Theme|Tema
+There are unsaved changes. Would you like to save them?|Hay cambios sin guardar. ¿Desea guardarlos?
+Thickness|Grosor
+Three|Tres
+Through Hole|Terminales para Soldar 
+Tick|Indicador
+Title|Título
+Toolbox|Caja de Herramientas
+Top|Arriba
+Top Lead|Conector Superior
+Top Left|Esquina Superior Izquierda
+Top Right|Esquina Superior Derecha
+Top-to-Bottom|De arriba hacia abajo
+Trace|Trazo
+Trace Color|Color del Trazo
+Trace Mask|Máscara del Trazado
+Transform Selection|Transformar Selección
+Triangle|Triángulo
+Tubular|Tubular
+Tubes|Válvulas
+Two|Dos
+Type|Tipo
+Ultra-miniature|Ultra-miniatura
+Underside Pad Color|Color del Pad Inferior
+Underside Trace Color|Color del Trazo Inferior
+Undo|Deshacer
+Ungroup Selection|Desagrupar Selección
+Unit|Unidad
+Upload A Project|Subir un Proyecto
+User Manual|Manual de Usuario
+Value|Valor
+Version history is not available.|El historial de versiones no está disponible.
+Vertical|Vertical
+Vertical Alignment|Alineamiento Vertical
+Vertical Inline|En linea Vertical
+Vertical Offset 1|Zig-Zag Vertical 1
+Vertical Offset 2|Zig-Zag Vertical 2
+View|Ver
+Visible|Visible
+Voltage|Voltaje
+Wafer|Wafer
+Warning|Advertencia
+Width|Anchura
+Winding Spacing|Espaciado del Devanado
+X-axis|Eje X
+Y-axis|Eje Y
+Zoom|Zoom
+base of 10|Base de 10
+base of 2|Base de 2
+hold %s and drag to unstick from|Mantenga presionado %s y arrastre para despegar
+Add a Curve|Agregar una Curva
+Clear|Limpiar
+Insert Image|Insertar Imagen
+Load From File|Carga desde Archivo
+Loadline Editor|Editor de Carga
+Max Current (mA)|Corriente Máxima (mA)
+Max Dissipation (W)|Disipación Máxima (W)
+Max Voltage (V)|Tensión Máxima (V)
+Save To File|Guardar en Archivo
+Update Axis|Actualizar Ejes
+Apply Variant|Aplicar Variante
+Save as Building Block|Guardar como Bloque 
+Select|Seleccionar
+Unlock|Desbloquear
@@ -0,0 +1,456 @@
+#start-internal
+icon=france
+#end-internal
+(Building Blocks)|(Blocs de construction)
+(Favorites)|(Favoris)
+(Recently Used)|(Récemment utilisé)
+180 degrees clockwise|180 degrés dans le sens horaire
+270 degrees clockwise|270 degrés dans le sens horaire
+90 degrees clockwise|90 degrés dans le sens horaire
+A variant with that name already exists. Overwrite?|Une variante avec ce nom existe déjà. Écraser?
+About|À propos
+Above|Ci-dessus
+Access User Files|Accéder aux fichiers utilisateur
+Add Flexible Leads|Ajouter des pattes flexibles
+Add Validation Step|Ajouter une étape de validation
+All Connected|Tous connectés
+Alpha|Alpha
+Analyze|Analyser
+Analyze Guitar Diagrams|Analyser les diagrammes de guitare
+Angle|Angle
+Anti-Aliasing|Anti-aliasing
+Arrow Size|Taille de la flèche
+Author|Auteur
+Auto-Create Pads|Création automatique des pads
+Auto-Edit Mode|Mode d'édition automatique
+Base|Base
+Below|Ci-dessous
+Blueprint|Plan
+Board|Plaque
+Boards|Plaques
+Board Color|Couleur de la plaque
+Board Width|Largeur de la plaque
+Bobbin 1|Bobine 1
+Bobbin 2|Bobine 2
+Body|Corps
+Border|Bordure
+Border Thickness|Épaisseur de la bordure
+Both|Les deux
+Both Sides|Les deux côtés
+Bottom|En bas
+Bottom Left|En bas à gauche
+Bottom Right|En bas à droite
+Bring Forward|Envoyer devant
+Bring Selection to Front|Amener la sélection au premier plan
+Buffer|Tampon
+Center|Borne
+Center Negative|Borne négative
+Center Positive|Borne positive
+Center Terminal|Borne centrale
+Central|Central
+Change Password|Changer le mot de passe
+Channel|Chaîne
+Chassis|Châssis
+Circular|Circulaire
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF|Cliquez sur un composant pour mettre en surbrillance la zone directement ou indirectement connectée à la zone située sous le curseur. Pour continuer l'édition, ce mode doit être désactivé
+Click on the canvas to create a new %s or press %s to cancel|Cliquez sur la toile pour créer un nouveau %s ou appuyez sur %s pour annuler
+Click on the canvas to set the %s control point of a new %s or press %s to cancel|Cliquez sur la toile pour définir le point de contrôle %s d'un nouveau %s ou appuyez sur %s pour annuler
+Click the lightbulb icon in the bottom-right corner of the window for more info.|Cliquez sur l'icône de l'ampoule dans le coin inférieur droit de la fenêtre pour plus d'informations.
+Click to fetch the most recent public announcement|Cliquez pour récupérer l'annonce publique la plus récente
+Click to show recent changes and updates|Cliquez pour afficher les modifications et mises à jour récentes
+Click to toggle to the next option|Cliquez pour passer à l'option suivante
+Coil|Bobine
+Coil Border|Bordure de la bobine
+Coil Length|Longueur de la bobine
+Coil Width|Largeur de la bobine
+Color|Couleur
+Color 1|Couleur 1
+Color 2|Couleur 2
+Color code|Code couleur
+Columns|Colonnes
+Component|Composant
+Component API|Composant API
+Components|Composants
+Config|Configuration
+Connector|Connecteur
+Connector (Mirrored)|Connecteur (inversé)
+Connectivity|Connectivité
+Contacts|Les contacts
+Continuous Creation|Création continue
+Coordinate Color|Couleur coordonnée
+Coordinate Origin|Origine des coordonnées
+Coordinates|Coordonnées
+Copy|Copier
+Core|Noyau
+Core Border|Bordure du noyau
+Core Thickness|Épaisseur du noyau
+Core Width|Largeur de noyau
+Could not create a new file. Check the log for details.|Impossible de créer un nouveau fichier. Consultez le journal pour plus de détails.
+Could not create component. Check log for details.|Impossible de créer le composant. Consultez le journal pour plus de détails.
+Could not fetch public announcements.|Impossible de récupérer les annonces publiques.
+Could not save the project to file. Check the log for details.|Impossible d'enregistrer le projet dans un fichier. Consultez le journal pour plus de détails.
+Could not set component type slot. Check log for details.|Impossible de définir l'emplacement du type de composant. Consultez le journal pour plus de détails.
+Cover|Couverture
+Create B.O.M.|Créer la nomenclature (B.O.M.) 
+Create New Account|Créer un nouveau compte
+Current|Courant
+Cut|Couper
+Cut Between Holes|Couper entre les trous
+Cut Orientation|Orientation de coupe
+DIP (Mirrored)|DIP (inversé)
+DP3T (Standard 3-Position Strat)|DP3T (Strat standard à 3 positions)
+DP3T (Standard 5-Position Strat)|DP3T (Strat standard à 5 positions)
+DP4T (4-Position Tele)|DP4T (Tele 4 positions)
+Dark|Sombre
+Dashed|Pointillé (ligne)
+Decimals|Décimales
+Default|Par défaut
+Default Font|Police par défaut
+Default Font Size|Taille de police par défaut
+Delete Selection|Supprimer la sélection
+Description|La description
+Diameter|Diamètre
+Directional|Directionnel
+Directly heated|Directement chauffé
+Display|Affichage
+Display Pin #s|Afficher broche #s
+Dog Ear|Dog Ear
+Dot Spacing|Espacement des points
+Dotted|Pointillé (tiret)
+Drag control point(s) of|Faites glisser le(s) point(s) de contrôle de
+Drag the mouse over the canvas to place a new|Faites glisser la souris sur la toile pour placer un nouveau
+Dual Rail Humbucker|Humbucker à double rail
+Dual Rods|Double rangée
+Duodecar B12C|Duodecar B12C
+Duplicate|Dupliquer
+Edges|Bords
+Edit|Modifier
+Edit Project Settings|Modifier les paramètres du projet
+Edit Selection|Modifier la sélection
+Electrode Labels|Étiquettes d'électrode
+Electro-Mechanical|Électromécanique
+Enable Cache Boost|Activer le boost du cache
+End Arrow|Flèche de fin
+Enjoying DIYLC? Click here to buy me a coffee :)|Vous aimez DIYLC? Cliquez ici pour m'offrir un café :)
+Error|Erreur
+Error occurred while editing selection. Check the log for details.|Une erreur s'est produite lors de la modification de la sélection. Consultez le journal pour plus de détails.
+Exit|Quitter
+Expand Selection|Etendre la sélection
+Explicit Dimensions|Dimensions explicites
+Explicit Length|Longueur explicite
+Explicit Width|Largeur explicite
+Export Building Blocks|Exporter des blocs de construction
+Export Grid|Grille d'exportation
+Export Variants|Exporter les variantes
+Export to PDF|Exporter au format PDF
+Export to PNG|Exporter au format PNG
+Extra Working Area|Zone de travail supplémentaire
+Eyelet color|Oeillet de couleur
+FAQ|FAQ
+File|Fichier
+Fill|Remplir
+Filtertron|Filtertron
+Find|Trouver
+Five|Cinq
+Flip|Retourner
+Folded|Plié
+Font|Police
+Font Bold|Gras
+Font Italic|Italic
+Font Size|Taille de police
+Font Size Override|Taille de police (re.)
+Four|Quatre
+Full|Complet
+Fuse|Fusible
+Generate DIYLC Netlist|Générer la Netlist DIYLC
+Generate Spice Netlist|Générer la Netlist Spice
+Grid|Grille
+Grid Spacing|Espacement de la grille
+Group Selection|Sélection de groupe
+Guitar|Guitare
+Half|Demi
+Hardware Acceleration|Accélération matérielle
+Heaters|Radiateurs
+Height|Hauteur
+Help|Aide
+Hi-Quality Rendering|Rendu en haute qualité
+Highlight Connected Areas|Mettre en surbrillance les zones connectées
+Hole|Trou
+Hole Size|Taille du trou
+Hole Spacing|Espacement des trous
+Hole size|Taille du trou
+Holes per strip|Trous par bande
+Horizontal|Horizontal
+Horizontal Alignment|Alignement horizontal
+Horizontal Large|Horizontal Large
+Horizontal Medium|Moyen horizontal
+Horizontal Small 1|Horizontal petit 1
+Horizontal Small 2|Horizontal petit 2
+Horizontal X-Small|X-Small horizontal
+Humbucking|Humbucking
+If this box is checked application will use the current value as a<br>default when creating new components of the same type|Si cette case est cochée, l'application utilisera la valeur actuelle comme valeur par défaut <br> lors de la création de nouveaux composants du même type
+Image|Image
+Immediate Only|Immédiatement proches seulement
+Import|Importer
+Import Building Blocks|Importer des blocs de construction
+Import Variants|Importer des variantes
+In-Line D-44|En ligne D-44
+In-line|En ligne
+Indent|Retrait
+Information|Information
+Inline|Inline
+Input error for "%s": %s|Erreur d'entrée pour "%s": %s"
+Inside color|Couleur intérieure
+Integration|Intégration
+Invert polarity|Inverser la polarité
+Label|Étiquette
+Label Color|Couleur de l'étiquette
+Label Orientation|Orientation de l'étiquette
+Label Position|Position de l'étiquette
+Labels|Les étiquettes
+Language|Langue
+Language selection will be applied after the application is restarted.|La sélection de la langue sera appliquée après le redémarrage de l'application.
+Layer|Couche
+Layers|Couches
+Lead Color|Couleur du fil
+Lead Count|Nombre de fils
+Lead Length|Longueur du fil
+Lead Spacing|Espacement des fils
+Left|Gauche
+Left-to-Right|De gauche à droite
+Left click to instantiate this component, right click for more options|Clic gauche pour instancier ce composant, clic droit pour plus d'options
+Legs|Jambes
+Length|Longueur
+Letters|Lettres
+Light|Lumière
+Lock|Verrouiller
+Log In|Se connecter
+Log Out|Se déconnecter
+Lug Size|Taille des cosses
+Lugs|Cosses
+Make a Donation|Faire un don
+Manage Account|Gérer le compte
+Manage My Uploads|Gérer mes téléchargements
+Mark Common Lugs|Marquer les cosses communes
+Marker|Marqueur
+Mini|Mini
+Miniature|Miniature
+Mirror Horizontally|Renverser horizontalement
+Mirror Selection|Renverser la sélection
+Mirror Vertically|Renverser verticalement
+Mirroring operation will change the circuit. Do you want to continue?|L'opération de renversement changera le circuit. Voulez-vous continuer?
+Misc|Divers
+Model|Modèle
+Mono|Mono
+Mount|Monter
+Mounting Lugs|Pattes de montage
+Mouse Wheel Zoom|Zoom de la molette de la souris
+Moveable Label|Étiquette mobile
+Name|Nom
+Negative|Négatif
+New|Nouveau
+New version available|Nouvelle version disponible
+No new public announcements available.|Aucune nouvelle annonce publique disponible.
+No|Non
+None|Aucun
+North|Nord
+Noval B9A|Noval B9A
+Nudge|Pousser
+Numbers|Chiffres
+Nut|Noix
+Octal|Octal
+Offset|Décalage
+One Side|Un côté
+Open|Ouvrir
+Opposing Points|Points opposés
+Orientation|Orientation
+Outer Foil|Feuille extérieure
+Outer Foil Mark|Marque de feuille extérieure
+Outline Mode|Mode contour
+Outside|Dehors
+Oval horizontal|Ovale horizontal
+Oval vertical|Ovale vertical
+Pad Color|Palette de couleurs
+Passive|Passif
+Paste|Coller
+Pin Arrangement|Disposition de la broche
+Pin Color|Couleur de la broche
+Pin Spacing|Espacement de la broche
+Pin spacing|Espacement de la broche
+Pinout|Brochage
+Pins|Epingles
+Play Test|Lancer le test
+Plugin API|Plugin API
+Point Count|Nombre de points
+Polarity|Polarité
+Polarized|Polarisé
+Pole Color|Couleur de l'aimant
+Pole Pieces|Pièces de l'aimant
+Pole Pieces 1|Pièces de l'aimant 1
+Pole Pieces 2|Pièces de l'aimant 2
+Positions|Postes
+Positive|Positif
+Power Rating|Puissance nominale
+Power Strip|Multiprise
+Primary CT|Prise centrale primaire
+Print...|Imprimer...
+Project Cloud|Projet Cloud
+Public Announcement|Annonce publique
+Radius|Rayon
+Rail|Rail
+Recent Files|Fichiers récents
+Recent Updates|Mises à jour récentes
+Redo|Refaire
+Renumber On Paste|Renuméroter en collant
+Renumber Selection|Renuméroter la sélection
+Resistance|Résistance
+Rev log|Journal de révision
+Reverse (standing)|Renverser (debout)
+Right|Droit
+Rim|Bord
+Rods|Rangée
+Rotate Clockwise|Rotation dans le sens horaire
+Rotate Counterclockwise|Rotation dans le sens antihoraire
+Rotate Selection|Faire pivoter la sélection
+Round|Ronde
+Round WOG A|Round WOG A
+Round WOG B|Round WOG B
+Row Spacing|Espacement des lignes
+Rows|Rangées
+Ruler Inch Subdivision...|Subdivision en pouces de la règle...
+Same Type Only|Même type uniquement
+Save|Enregistrer
+Save As|Enregistrer sous
+Save as Variant|Enregistrer en tant que variante
+Scale|Echelle
+Schematic Symbols|Symboles schématiques
+Screws|Vis
+Selection|Sélection
+Selection Size|Taille de la sélection
+Selection is empty.|La sélection est vide.
+Search The Cloud|Rechercher dans le cloud
+Searchable Tree|Arbre consultable
+Secondary CT|CT secondaire
+Select All|Tout sélectionner
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?|Les composants sélectionnés ont atteint le bas de leur calque. Voulez-vous forcer la sélection vers l'arrière?
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?|Les composants sélectionnés ont atteint le haut de leur calque. Voulez-vous forcer la sélection vers le haut?
+Selection contains components that cannot be mirrored. Do you want to exclude them?|La sélection contient des composants qui ne peuvent pas être mis en miroir. Voulez-vous les exclure?
+Selection contains components that cannot be rotated. Do you want to exclude them?|La sélection contient des composants qui ne peuvent pas être pivotés. Voulez-vous les exclure?
+Semiconductors|Semi-conducteurs
+Send Backward|Envoyer vers l'arrière
+Send Selection to Back|Envoyer la sélection vers l'arrière
+Seven|Sept
+Shaft Down|Tige vers le bas
+Shaft Up|Tige vers le haut
+Shape|Forme
+Shapes|Formes
+Show Grid|Afficher la grille
+Show Rulers|Afficher les règles
+Shroud|Enveloppe
+Shrouded|Enveloppé
+Single Rail|Rail simple
+Single Rods|Rangée simple
+Size|Taille
+Sizing Mode|Mode de redimensionnement
+Small-button B7G|Petit bouton B7G
+Smooth|Lisse
+Snap To|Aimanter à
+Soap Bar|Soap Bar
+Solid|Solide
+South|Sud
+Spacing|Espacement
+Square|Carré
+Square BR-3|Carré BR-3
+Standard|Standard
+Start Arrow|Flèche de départ
+Start Recording|Démarrer l'enregistrement
+Stereo|Stéréo
+Sticky Points|Points aimantés
+Stop Recording|Arrêter l'enregistrement
+Stratocaster|Stratocaster
+Strip Color|Couleur de la bande
+Stripe|Rayure
+Stripe 1|Rayure 1
+Stripe 2|Rayure 2
+Stripe Color|Couleur de la rayure
+Stripe Color 1|Couleur de la rayure 1
+Stripe Color 2|Couleur de la rayure 2
+Style|Style
+Submit a Bug|Soumettre un bug
+Suppressor grid|Grille de suppression
+Switched|Commuté
+Switches|Commutateurs
+Tab|Onglet
+Tab Border|Bordure de tabulation
+Tabbed Toolbar|Barre d'outils à onglets
+Taper|De réduction
+Telecaster|Telecaster
+Terminal Spacing|Espacement des bornes
+Terminals|Terminaux
+Test|Test
+Text|Texte
+Text Color|Couleur du texte
+Theme|Thème
+There are unsaved changes. Would you like to save them?|Il y a des modifications non enregistrées. Voulez-vous les enregistrer?
+Thickness|Épaisseur
+Three|Trois
+Through Hole|Trou traversant
+Tick|Cocher
+Title|Titre
+Toolbox|Boîte à outils
+Top|Haut
+Top Lead|Fil du haut
+Top Left|En haut à gauche
+Top Right|En haut à droite
+Top-to-Bottom|De haut en bas
+Trace|Piste
+Trace Color|Couleur de la piste
+Trace Mask|Masque de la piste
+Transform Selection|Transformer la sélection
+Triangle|Triangle
+Tubular|Tubulaire
+Tubes|Tubes
+Two|Deux
+Type|Taper
+Ultra-miniature|Ultra-miniature
+Underside Pad Color|Couleur du tampon inférieur
+Underside Trace Color|Couleur de la trace inférieure
+Undo|Annuler
+Ungroup Selection|Dissocier la sélection
+Unit|Unité
+Upload A Project|Télécharger un projet
+User Manual|Manuel d'utilisation
+Value|Valeur
+Version history is not available.|L'historique des versions n'est pas disponible.
+Vertical|Vertical
+Vertical Alignment|Alignement vertical
+Vertical Inline|en ligne vertical
+Vertical Offset 1|Décalage vertical 1
+Vertical Offset 2|Décalage vertical 2
+View|Afficher
+Visible|Visible
+Voltage|Tension
+Wafer|Wafer
+Warning|Avertissement
+Width|Largeur
+Winding Spacing|Espacement des enroulements
+X-axis|Axe X
+Y-axis|Axe Y
+Zoom|Zoom
+base of 10|base de 10
+base of 2|base de 2
+hold %s and drag to unstick from|maintenez %s et faites glisser pour décoller
+Add a Curve
+Clear
+Insert Image
+Load From File
+Loadline Editor
+Max Current (mA)
+Max Dissipation (W)
+Max Voltage (V)
+Save To File
+Update Axis
+Apply Variant
+Save as Building Block
+Select
+Unlock
@@ -0,0 +1,459 @@
+#start-internal
+icon=italy
+#end-internal
+(Building Blocks)|(Blocchi Costruttivi)
+(Favorites)|(Preferiti)
+(Recently Used)|(Usato di recente)
+180 degrees clockwise|180 gradi in senso orario
+270 degrees clockwise|270 gradi in senso orario
+90 degrees clockwise|90 gradi in senso orario
+A variant with that name already exists. Overwrite?|Una variante con quel nome esiste già. Sovrascrivere?
+About|Circa
+Above|Sopra
+Access User Files|Accesso File Utente
+Add a Curve |Aggiungi una curva
+Add Flexible Leads|Aggiungi Cavi Flessibili
+Add Validation Step|Aggiungi Passaggio di Convalida
+All Connected|Tutto Collegato
+Alpha|Alfa
+Analyze|Analizza
+Analyze Guitar Diagrams|Analizza i Diagrammi della Chitarra
+Angle|Angolo
+Anti-Aliasing|Anti-Aliasing
+Apply Variant|Applica variante
+Arrow Size|Dimensione Freccia
+Author|Autore
+Auto-Create Pads|Creazione Automatica dei Pad
+Auto-Edit Mode|Modalità di Editaggio Automatica
+Base|Base
+Below|Sotto
+Blueprint|Planimetria
+Board|Scheda
+Boards|Schede
+Board Color|Colore Scheda
+Board Width|Larghezza della Scheda
+Bobbin 1|Bobina 1
+Bobbin 2|Bobina 2
+Body|Corpo
+Border|Bordo
+Border Thickness|Spessore del Bordo
+Both|Entrambi
+Both Sides|Entrambi i Lati
+Bottom|In Basso
+Bottom Left|In Basso a Sinistra
+Bottom Right|In Basso a Destra
+Bring Forward|Porta in Primo Piano
+Bring Selection to Front|Porta la selezione in primo piano
+Buffer|Buffer
+Center|Centro
+Center Negative|Centro Negativo
+Center Positive|Centro Positivo
+Center Terminal|Terminale Centrale
+Central|Centrale
+Change Password|Cambia Password
+Channel|Canale
+Chassis|Telaio
+Circular|Circolare
+Clear |Libera
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF|Clicca su un componente per evidenziare l'area direttamente o indirettamente connessa all'area sotto il cursore. Per continuare la modifica, questa modalità deve essere disattivata
+Click on the canvas to create a new %s or press %s to cancel|Fai clic sull'area di disegno per crearne un nuovo %s oppure premi %s per annullare
+Click on the canvas to set the %s control point of a new %s or press %s to cancel|Clicca sull'area di disegno per impostare il punto di controllo %s di un nuovo %s oppure premi %s per annullare
+Click the lightbulb icon in the bottom-right corner of the window for more info.|Clicca sull'icona della lampadina nell'angolo in basso a destra della finestra per ulteriori informazioni.
+Click to fetch the most recent public announcement|Clicca per recuperare l'annuncio pubblico più recente
+Click to show recent changes and updates|Clicca per mostrare le modifiche e gli aggiornamenti recenti
+Click to toggle to the next option|Clicca per passare all'opzione successiva
+Coil|Bobina
+Coil Border|Bordo della Bobina
+Coil Length|Lunghezza della Bobina
+Coil Width|Larghezza della Bobina
+Color|Colore
+Color 1|Colore 1
+Color 2|Colore 2
+Color code|Codice Colore
+Columns|Colonne
+Component|Componente
+Component API|Componente API
+Components|Componenti
+Config|Configura
+Connector|Connettore
+Connector (Mirrored)|Connettore (Specchiato)
+Connectivity|Connettività
+Contacts|Contatti
+Continuous Creation|Creazione Continua
+Coordinate Color|Colore Coordinata
+Coordinate Origin|Origine Coordinata
+Coordinates|Coordinate
+Copy|Copia
+Core|Nucleo
+Core Border|Bordo del Nucleo
+Core Thickness|Spessore del Nucleo
+Core Width|Larghezza del Nucleo
+Could not create a new file. Check the log for details.|Impossibile creare un nuovo file. Controlla il registro per i dettagli.
+Could not create component. Check log for details.|Impossibile creare il componente. Controlla il registro per i dettagli.
+Could not fetch public announcements.|Impossibile recuperare gli annunci pubblici.
+Could not save the project to file. Check the log for details.|Impossibile salvare il progetto in un file. Controlla il registro per i dettagli.
+Could not set component type slot. Check log for details.|Impossibile impostare lo slot del componente. Controlla il registro per i dettagli.
+Cover|Copertina
+Create B.O.M.|Crea B.O.M.
+Create New Account|Crea un nuovo account
+Current|Corrente
+Cut|Taglia
+Cut Between Holes|Tagliare tra i fori
+Cut Orientation|Orientamento al taglio
+DIP (Mirrored)|DIP (Specchiato)
+DP3T (Standard 3-Position Strat)|DP3T (Strat standard a 3 posizioni)
+DP3T (Standard 5-Position Strat)|DP3T (Strat standard a 5 posizioni)
+DP4T (4-Position Tele)|DP4T (Tele a 4 posizioni)
+Dark|Scuro
+Dashed|Tratteggiata
+Decimals|Decimali
+Default|Predefinito
+Default Font|Carattere Predefinito
+Default Font Size|Dimensione Carattere Predefinita
+Delete Selection|Elimina Selezione
+Description|Descrizione
+Diameter|Diametro
+Directional|Direzionale
+Directly heated|Riscaldato Diretto
+Display|Display
+Display Pin #s|Mostra i Pin #s
+Dog Ear|Dog Ear
+Dot Spacing|Spaziatura Punti
+Dotted|Tratteggiato
+Drag control point(s) of|Trascina i punti di controllo di
+Drag the mouse over the canvas to place a new|Trascina il mouse sulla tela per posizionarne una nuova
+Dual Rail Humbucker|Humbucker Dual Rail
+Dual Rods|Doppia Asta
+Duodecar B12C|Duodecar B12C
+Duplicate|Duplica
+Edges|Bordi
+Edit|Modifica
+Edit Project Settings|Modifica Impostazioni Progetto
+Edit Selection|Modifica Selezione
+Electrode Labels|Etichette degli Elettrodi
+Electro-Mechanical|Elettromeccanico
+Enable Cache Boost|Abilita Cache Boost
+End Arrow|Freccia Finale
+Enjoying DIYLC? Click here to buy me a coffee :)|Ti piace DIYLC? Clicca qui per offrirmi un caffè :)
+Error|Errore
+Error occurred while editing selection. Check the log for details.|Si è verificato un errore durante la modifica della selezione. Controlla il registro per i dettagli.
+Exit|Uscita
+Expand Selection|Espandi selezione
+Explicit Dimensions|Dimensioni esplicite
+Explicit Length|Lunghezza esplicita
+Explicit Width|Larghezza esplicita
+Export Building Blocks|Esporta blocchi costruttivi
+Export Grid|Esporta griglia
+Export Variants|Esporta varianti
+Export to PDF|Esporta in PDF
+Export to PNG|Esporta in PNG
+Extra Working Area|Area di lavoro extra
+Eyelet color|Colore occhiello
+FAQ|FAQ
+File|Documento
+Fill|Riempi
+Filtertron|Filtertron
+Find|Trova
+Five|Cinque
+Flip|Ribalta
+Folded|Ripiegato
+Font|Carattere
+Font Bold|Carattere grassetto
+Font Italic|Carattere corsivo
+Font Size|Dimensione carattere
+Font Size Override|Dimensione carattere (sos.)
+Four|Quattro
+Full|Pieno
+Fuse|Fusibile
+Generate DIYLC Netlist|Genera netlist DIYLC
+Generate Spice Netlist|Genera netlist Spice
+Grid|Griglia
+Grid Spacing|Spaziatura griglia
+Group Selection|Selezione di gruppo
+Guitar|Chitarra
+Half|Metà
+Hardware Acceleration|Accelerazione hardware
+Heaters|Filamenti
+Height|Altezza
+Help|Aiuto
+Hi-Quality Rendering|Rendering di alta qualità
+Highlight Connected Areas|Evidenzia aree connesse
+Hole|Foro
+Hole Size|Dimensione del foro
+Hole Spacing|Distanza tra i fori
+Hole size|Dimensione del foro
+Holes per strip|Fori per fila
+Horizontal|Orizzontale
+Horizontal Alignment|Allineamento orizzontale
+Horizontal Large|Orizzontale Largo
+Horizontal Medium|Orizzontale Medio
+Horizontal Small 1|Orizzontale Piccolo 1
+Horizontal Small 2|Orizzontale Piccolo 2
+Horizontal X-Small|Orizzontale X-Piccolo
+Humbucking|Humbucking
+If this box is checked application will use the current value as a<br>default when creating new components of the same type|Se questa casella è selezionata, l'applicazione utilizzerà il valore corrente come predefinito quando si creano nuovi componenti dello stesso tipo
+Image|Immagine
+Immediate Only|Solo immediato
+Import|Importa
+Import Building Blocks|Importa blocchi di costruzione
+Import Variants|Importa varianti
+In-Line D-44|In linea D-44
+In-line|In linea
+Indent|Trattino
+Information|Informazioni
+Inline|In fila
+Input error for "%s": %s|Errore di input per " %s": %s
+Insert Image|Inserisci immagine
+Inside color|Colore interno
+Integration|Integrazione
+Invert polarity|Invertire la polarità
+Label|etichetta
+Label Color|Colore etichetta
+Label Orientation|Etichetta di orientamento
+Label Position|Etichetta di posizione
+Labels|etichette
+Language|Lingua
+Language selection will be applied after the application is restarted.|La selezione della lingua verrà applicata dopo il riavvio dell'applicazione.
+Layer|strato
+Layers|Livelli
+Lead Color|Colore cavo
+Lead Count|Conteggio del cavo
+Lead Length|Lunghezza del cavo
+Lead Spacing|Spaziatura del cavo
+Left|sinistra
+Left-to-Right|Da sinistra a Destra
+Left click to instantiate this component, right click for more options|Fare clic con il tasto sinistro del mouse per creare un'istanza di questo componente, fare clic con il tasto destro per ulteriori opzioni
+Legs|Reoforo
+Length|lunghezza
+Letters|lettere
+Light|luce
+Lin|biancheria
+Lip|labbro
+Load From File|Carica da file
+Loadline Editor|Editor rette di carico
+Lock|Blocco
+Log|Accesso
+Log In|Accedi
+Log Out|Esci
+Lug Size|Dimensione dell'aletta
+Lugs|Alette
+Make a Donation|Fai una donazione
+Manage Account|Gestisci account
+Manage My Uploads|Gestisci i miei caricamenti
+Mark Common Lugs|Segna le alette comuni
+Marker|marcatore
+Max Current (mA)|Corrente massima (mA)
+Max Dissipation (W)|Dissipazione massima (W)
+Max Voltage (V)|Tensione massima (V)
+Mini|mini
+Miniature|miniatura
+Mirror Horizontally|Specchia orizzontalmente
+Mirror Selection|Selezione specchiatura
+Mirror Vertically|Specchia verticalmente
+Mirroring operation will change the circuit. Do you want to continue?|L'operazione di specchiatura cambierà il circuito. Vuoi continuare?
+Misc|Varie
+Model|modello
+Mono|mono
+Mount|Montaggio
+Mounting Lugs|Alette di montaggio
+Mouse Wheel Zoom|Zoom ruota del mouse
+Moveable Label|Etichetta mobile
+Name|nome
+Nand|Nand
+Negative|negativo
+New|nuovo
+New version available|Nuova versione disponibile
+No new public announcements available.|Nessun nuovo annuncio pubblico disponibile.
+No|No.
+None|nessuno
+North|nord
+Noval B9A|Noval B9A
+Nudge|Tocco
+Numbers|numeri
+Nut|noce
+Octal|Octal
+Offset|Fuori centro
+One Side|Un lato
+Open|aperto
+Opposing Points|Punti opposti
+Orientation|orientamento
+Outer Foil|Foglio esterno
+Outer Foil Mark|Marco foglio esterno
+Outline Mode|Modalità Contorno
+Outside|al di fuori
+Oval horizontal|Ovale orizzontale
+Oval vertical|Ovale verticale
+Pad Color|Colore piazzola
+Passive|passivo
+Paste|incollare
+Pin Arrangement|Disposizione pin
+Pin Color|Colore pin
+Pin Spacing|Distanza tra i pin
+Pin spacing|Distanza tra i pin
+Pinout|piedinatura
+Pins|Piedini
+Play Test|Esegui il Test
+Plugin API|Plugin API
+Point Count|Conteggio punti
+Polarity|polarità
+Polarized|Polarizzato
+Pole Color|Colore Polo
+Pole Pieces|Pezzi del Polo
+Pole Pieces 1|Pezzi polo 1
+Pole Pieces 2|Pezzi polo 2
+Positions|posizioni
+Positive|positivo
+Power Rating|Potenza nominale
+Power Strip|Ciabatta
+Primary CT|CT primario
+Print...|Stampa ...
+Project Cloud|Progetto Cloud
+Public Announcement|Annuncio pubblico
+Radius|raggio
+Rail|rotaia
+Recent Files|File recenti
+Recent Updates|Aggiornamenti recenti
+Redo|Redo
+Renumber On Paste|Rinumera su Incolla
+Renumber Selection|Rinumera selezione
+Resistance|resistenza
+Rev log|Rev Log
+Reverse (standing)|Inverso (in piedi)
+Right|destra
+Rods|Canne
+Rotate Clockwise|Ruota in senso orario
+Rotate Counterclockwise|Ruota in senso antiorario
+Rotate Selection|Ruota selezione
+Round|tondo
+Round WOG A|Round WOG A
+Round WOG B|Round WOG B
+Row Spacing|Spaziatura righe
+Rows|righe
+Ruler Inch Subdivision...|Suddivisione riga in pollici
+Same Type Only|Solo dello stesso tipo
+Save|Salva
+Save As|Salva con nome
+Save as Building Block|Salva come blocco costruttivo
+Save as Variant|Salva come variante
+Save To File|Salva al file
+Scale|scala
+Schematic Symbols|Simboli componenti
+Screws|viti
+Select|Seleziona
+Selection|selezione
+Selection Size|Dimensione selezione
+Selection is empty.|La selezione è vuota
+Search The Cloud|Cerca nel cloud
+Searchable Tree|Albero ricercabile
+Secondary CT|CT secondario
+Select All|Seleziona tutto
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?|I componenti selezionati hanno raggiunto il fondo del loro livello. Vuoi forzare la selezione verso il basso?
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?|I componenti selezionati hanno raggiunto la cima del loro livello. Vuoi forzare la selezione verso l'alto?
+Selection contains components that cannot be mirrored. Do you want to exclude them?|La selezione contiene componenti che non possono essere specchiati. Vuoi escluderli?
+Selection contains components that cannot be rotated. Do you want to exclude them?|La selezione contiene componenti che non possono essere ruotati. Vuoi escluderli?
+Semiconductors|Semiconduttori
+Send Backward|Invia indietro
+Send Selection to Back|Invia selezione indietro
+Seven|sette
+Shaft Down|Shaft Down
+Shaft Up|Shaft Up
+Shape|forma
+Shapes|forme
+Show Grid|Mostra griglia
+Show Rulers|Mostra righelli
+Shroud|Copri
+Shrouded|Coperto
+Single Rail|Single Rail
+Single Rods|Canne Singole
+Size|dimensione
+Sizing Mode|Modalità di dimensionamento
+Small-button B7G|Pulsante piccolo B7G
+Smooth|Smussato
+Snap To|Aggancia a
+Soap Bar|Soap Bar
+Solid|solido
+South|Sud
+Spacing|spaziatura
+Square|Quadrato
+Square BR-3|Square BR-3
+Standard|standard
+Start Arrow|Inizia la freccia
+Start Recording|Inizia la registrazione
+Stereo|stereo
+Sticky Points|Punti adesivi
+Stop Recording|Ferma la registrazione
+Stratocaster|Stratocaster
+Strip Color|Colore della striscia
+Stripe|striscia
+Stripe 1|Striscia 1
+Stripe 2|Striscia 2
+Stripe Color|Colore  striscia
+Stripe Color 1|Colore striscia 1
+Stripe Color 2|Colore striscia 2
+Style|stile
+Submit a Bug|Invia un bug
+Suppressor grid|Griglia soppressore
+Switched|Switched
+Switches|Interruttori
+Tab|Barra
+Tab Border|Bordo barra
+Tabbed Toolbar|Barra degli strumenti a schede
+Taper|tipo
+Telecaster|Telecaster
+Terminal Spacing|Spaziatura terminale
+Terminals|terminali
+Test|prova
+Text|testo
+Text Color|Colore del testo
+Theme|tema
+There are unsaved changes. Would you like to save them?|Ci sono modifiche non salvate. Vuoi salvarli?
+Thickness|spessore
+Three|tre
+Through Hole|Foro passante
+Tick|Spunto
+Title|titolo
+Toolbox|cassetta degli attrezzi
+Top|top
+Top Lead|Conduttore superiore
+Top Left|In alto a sinistra
+Top Right|In alto a destra
+Top-to-Bottom|Dall alto al basso
+Trace|traccia
+Trace Color|Colore traccia
+Trace Mask|Maschera traccia
+Transform Selection|Trasforma selezione
+Triangle|triangolo
+Tubular|tubolare
+Tubes|tubo
+Two|due
+Type|tipo
+Ultra-miniature|Ultra-miniatura
+Underside Pad Color|Colore piazzola inferiore
+Underside Trace Color|Colore della traccia inferiore
+Undo|Annulla
+Ungroup Selection|Separa la selezione
+Unlock|Sblocca
+Unit|unità
+Update Axis|Aggiorna asse
+Upload A Project|Carica un progetto
+User Manual|Manuale dell'utente
+Value|valore
+Version history is not available.|La cronologia della versione non è disponibile.
+Vertical|verticale
+Vertical Alignment|Allineamento verticale
+Vertical Inline|In fila verticale
+Vertical Offset 1|Offset verticale 1
+Vertical Offset 2|Offset verticale 2
+View|vista
+Visible|visibile
+Voltage|tensione
+Wafer|wafer
+Warning|avvertimento
+Width|larghezza
+Winding Spacing|Spaziatura degli avvolgimenti
+X-axis|Asse X
+Y-axis|Asse Y
+Zoom|Ingrandimento
+base of 10|base di 10
+base of 2|base di 2
+hold %s and drag to unstick from|tieni premuto %s e trascina per sbloccare da
@@ -0,0 +1,459 @@
+#start-internal
+icon=netherlands
+#end-internal
+(Building Blocks)|(Bouwstenen)
+(Favorites)|(Favorieten) 
+(Recently Used)|(Recentelijk gebruikt) 
+180 degrees clockwise|180 graden
+270 degrees clockwise|270 graden rechtsom 
+90 degrees clockwise|90 graden rechtsom 
+A variant with that name already exists. Overwrite?|Er bestaat al een variant met die naam. Overschrijven? 
+About|Over 
+Above|Boven
+Open User Directory|Map van de gebruiker openen
+Add a Curve|Lijn toevoegen
+Add Flexible Leads|Flexibele draaden toevoegen
+Add Validation Step|Controlestap toevoegen 
+All Connected|Alle verbonden 
+Alpha|Opaciteit 
+Analyze|Analyseren 
+Apply Variant|Variant toepassen
+Analyze Guitar Diagrams|Gitaar diagrammen analyseren
+Angle|Hoek 
+Anti-Aliasing|Anti-aliasing 
+Arrow Size|Pijlgrootte 
+Author|Ontwerper
+Auto-Create Pads|Automatisch aanmaken van soldeereilandjes 
+Auto-Edit Mode|Automatisch bewerken modus
+Base|Basis
+Below|Onder
+Blueprint|Blauwdruk
+Board|Printplaat
+Boards|Printplaten
+Board Color|Printplaat kleur
+Board Width|Printplaat breedte
+Bobbin 1|Spoel 1 
+Bobbin 2|Spoel 2 
+Body|Lichaam 
+Border|Rand
+Border Thickness|Randdikte 
+Both|Beide 
+Both Sides|Beide kanten 
+Bottom|Onderkant
+Bottom Left|Linksonder 
+Bottom Right|Rechtsonder 
+Bring Forward|Verhogen
+Bring Selection to Front|Selectie naar top brengen
+Buffer|Buffer 
+Center|Midden 
+Center Negative|Middenpin negatief 
+Center Positive|Middenpin positief 
+Center Terminal|Middenpin aansluiting
+Central|Centraal 
+Change Password|Wachtwoord wijzigen 
+Channel|Channel
+Chassis|Chassis
+Circular|Rond
+Clear|Alles wissen
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF|Klik op een component om het gebied te markeren dat direct of indirect verbonden is met het gebied onder de cursor. Om door te gaan met bewerken, moet deze modus worden uitgeschakeld 
+Click on the canvas to create a new %s or press %s to cancel|Klik op het werkblad om een nieuwe %s te maken of druk op %s om te annuleren 
+Click on the canvas to set the %s control point of a new %s or press %s to cancel|Klik op het werkblad om het %s-controlepunt van een nieuwe %s in te stellen of druk op %s om te annuleren 
+Click the lightbulb icon in the bottom-right corner of the window for more info.|Klik op het gloeilampicoon in de rechteronderhoek van het venster voor meer informatie.
+Click to fetch the most recent public announcement|Klik om de meest recente openbare aankondiging op te halen 
+Click to show recent changes and updates|Klik om recente wijzigingen en updates weer te geven
+Click to toggle to the next option|Klik om naar de volgende optie te gaan 
+Coil|Spoel
+Coil Border|Spoelrand
+Coil Length|Spoellengte
+Coil Width|Spoelbreedte
+Color|Kleur 
+Color 1|Kleur 1 
+Color 2|Kleur 2 
+Color code|Kleurcode 
+Columns|Kolommen
+Component|Component
+Component API|Component API
+Components|Componenten
+Config|Configuratie
+Connector|Connector 
+Connector (Mirrored)|Connector (gespiegeld) 
+Connectivity|Connectiviteit 
+Contacts|Contacten 
+Continuous Creation|Doorgaan met invoegen
+Coordinate Color|Coördinaatkleur
+Coordinate Origin|Coördinaatoorsprong
+Coordinates|Coördinaten 
+Copy|Kopiëren
+Core|Kern
+Core Border|Kernrand
+Core Thickness|Kerndikte
+Core Width|Kernbreedte
+Could not create a new file. Check the log for details.|Kon geen nieuw bestand maken. Controleer het logbestand voor details.
+Could not create component. Check log for details.|Kon component niet maken. Controleer het logbestand voor details.
+Could not fetch public announcements.|Kon geen openbare aankondigingen ophalen.
+Could not save the project to file. Check the log for details.|Kon het project niet opslaan in  bestand. Controleer het logbestand voor details.
+Could not set component type slot. Check log for details.|Kon sleuf voor componenttype niet instellen. Controleer logbestand voor details. 
+Cover|Deksel
+Create B.O.M.|Stuklijst maken
+Create New Account|Nieuw account aanmaken
+Current|Stroom
+Cut|Snijden
+Cut Between Holes|Tussen gaten onderbreken
+Cut Orientation|Onderbrekingsoriëntatie
+DIP (Mirrored)|DIP (gespiegeld) 
+DP3T (Standard 3-Position Strat)|DP3T (standaard Strat met 3 posities) 
+DP3T (Standard 5-Position Strat)|DP3T (standaard Strat met 5 posities) 
+DP4T (4-Position Tele)|DP4T (Tele met 4 posities) 
+Dark|Donker 
+Dashed|Gestreept
+Decimals|Decimalen
+Default|Standard waarde
+Default Font|Standaard lettertype 
+Default Font Size|Standaard lettergrootte 
+Delete Selection|Selectie verwijderen 
+Description|Beschrijving 
+Diameter|Diameter 
+Directional|Directioneel
+Directly heated|Direct verwarmd
+Display|Weergeven
+Display Pin #s|Pin #s weergeven
+Dog Ear|Dog Ear
+Dot Spacing|Spatiëring
+Dotted|Gestippeld
+Drag control point(s) of|Sleep de controlepunt(en) van
+Drag the mouse over the canvas to place a new|De muis over het doek slepen plaatst een nieuwe
+Dual Rail Humbucker|Dubbele rail Humbucker
+Dual Rods|Dubbele polen 
+Duodecar B12C|Duodecar B12C 
+Duplicate|Dupliceren
+Edges|Randen
+Edit|Bewerken
+Edit Project Settings|Projectinstellingen bewerken 
+Edit Selection|Selectie bewerken 
+Electrode Labels|Elektrodelabels
+Electro-Mechanical|Elektromechanische
+Enable Cache Boost|Cachegeheugen boost inschakelen
+End Arrow|Eindpijl
+Enjoying DIYLC? Click here to buy me a coffee :)|Vindt je DIYLC leuk? Klik hier om een kopje koffie voor me te kopen :)
+Error|Fout
+Error occurred while editing selection. Check the log for details.|Er is een fout opgetreden bij het bewerken van de selectie. Controleer het logbestand voor details. 
+Exit|Afsluiten
+Expand Selection|Selectie uitbreiden
+Explicit Dimensions|Expliciete dimensies 
+Explicit Length|Expliciete lengte 
+Explicit Width|Expliciete breedte 
+Export Building Blocks|Bouwstenen exporteren
+Export Grid|Raster exporteren 
+Export Variants|Varianten exporteren 
+Export to PDF|Naar PDF exporteren
+Export to PNG|Naar PNG exporteren 
+Extra Working Area|Extra werkruimte
+Eyelet color|Via kleur
+FAQ|Veelgestelde vragen
+File|Bestand
+Fill|Vullen
+Filtertron|Filtertron
+Find|Vinden
+Five|Vijf
+Flip|Omkeren
+Folded|Gevouwen 
+Font|Lettertype 
+Font Bold|Vet lettertype 
+Font Italic|Cursief lettertype 
+Font Size|Tekengrootte
+Font Size Override|Tekengrootte overschrijven
+Four|Vier
+Full|Vol
+Fuse|Zekering
+Generate DIYLC Netlist|DIYLC netlist genereren
+Generate Spice Netlist|Spice netlist genereren
+Grid|Raster
+Grid Spacing|Rasterafstand
+Group Selection|Selectie groeperen
+Guitar|Gitaar 
+Half|Helft 
+Hardware Acceleration|Hardware versnelling 
+Heaters|Gloeidraden
+Height|Hoogte
+Help|Hulp
+Hi-Quality Rendering|Hoge kwaliteit rendering
+Highlight Connected Areas|Verbonden gebieden markeren
+Hole|Gat 
+Hole Size|Gatgrootte 
+Hole Spacing|Gatafstand 
+Holes per strip|Gaten per strip 
+Horizontal|Horizontaal 
+Horizontal Alignment|Horizontale uitlijning 
+Horizontal Large|Horizontaal groot 
+Horizontal Medium|Horizontaal medium 
+Horizontal Small 1|Horizontaal klein 1 
+Horizontal Small 2|Horizontaal klein 2 
+Horizontal X-Small|Horizontaal extra klein
+Humbucking|Humbucking 
+If this box is checked application will use the current value as a<br>default when creating new components of the same type|Als dit vakje is aangevinkt, gebruikt het programma de huidige waarde als<br>standaardinstelling bij het maken van nieuwe componenten van hetzelfde type 
+Image|Afbeelding 
+Immediate Only|Alleen direct 
+Import|Importeren
+Import Building Blocks|Bouwstenen importeren
+Import Variants|Varianten importeren
+In-Line D-44|Inline D-44
+In-line|Inline
+Indent|Inspringen 
+Information|Informatie 
+Input error for "%s": %s|Invoerfout voor " %s": %s
+Insert Image|Afbeelding invoegen
+Inside color|Binenkant kleur
+Integration|Integratie
+Invert polarity|Wissel polariteit
+Label|Label
+Label Color|Labelkleur
+Label Orientation|Labeloriëntatie
+Label Position|Labelpositie
+Labels|Labels
+Language|Taal 
+Language selection will be applied after the application is restarted.|Taalkeuze wordt toegepast nadat het programma opnieuw is opgestart. 
+Layer|Laag 
+Layers|Lagen 
+Lead Color|Draadkleur
+Lead Count|Aantal draaden 
+Lead Length|Draad lengte
+Lead Spacing|Pitch
+Left|Linkerzijde
+Left-to-Right|Links naar rechts
+Left click to instantiate this component, right click for more options|Klik met de linkermuisknop om dit onderdeel te instantiëren, klik met de rechtermuisknop voor meer opties 
+Legs|Pootjes
+Length|Lengte 
+Letters|Letteren
+Light|Licht
+Lin|Lineair
+Load From File|Bestand Laden
+Loadline Editor|Belastingslijn opmaakprogramma
+Lock|Vastpinnen
+Log|Logaritmisch
+Log In|Inloggen
+Log Out|Uitloggen
+Lug Size|Solderooggrootte
+Lugs|Solderogen
+Make a Donation|Doneren
+Manage Account|Account beheren
+Manage My Uploads|Uploads beheren
+Mark Common Lugs|Gemeenschappelijke Solderogen markeren
+Marker|Merkteken
+Max Current (mA)|Max. stroom (mA)
+Max Dissipation (W)|Max. dissipatie (W)
+Max Voltage (V)|Max. spanning (V)
+Mini|Mini
+Miniature|Miniatuur
+Mirror Horizontally|Horizontaal spiegelen
+Mirror Selection|Selectie spiegelen
+Mirror Vertically|Verticaal spiegelen
+Mirroring operation will change the circuit. Do you want to continue?|Het spiegelen zal het circuit veranderen. Wil je doorgaan? 
+Misc|Diversen
+Model|Model
+Mono|Mono
+Mount|Bevestiging
+Mounting Lugs|Bevestingslippen
+Mouse Wheel Zoom|Muiswiel zoom
+Moveable Label|Verplaatsbaar label
+Name|Naam
+Nand|NAND
+Negative|Negatief 
+New|Nieuw 
+New version available|Nieuwe versie beschikbaar 
+No new public announcements available.|Geen nieuwe aankondigingen beschikbaar. 
+No|Nr.
+None|Niets
+North|Noord
+Noval B9A|Noval B9A
+Nudge|Duwen
+Numbers|Nummeren
+Nut|Moer
+Octal|Octal
+Offset|Offset
+One Side|Een kant
+Open|Open
+Opposing Points|Tegenoverstaande punten
+Orientation|Oriëntatie
+Outer Foil|Buitentste folie
+Outer Foil Mark|Buitenste folie markering
+Outline Mode|Omtrekmodus
+Outside|Buiten
+Oval horizontal|Horizontaale ovaal
+Oval vertical|Verticale ovaal
+Pad Color|Soldeereilandje kleur
+Passive|Passief
+Paste|Plakken
+Pin Arrangement|Pin indeling
+Pin Color|Pin kleur 
+Pin Spacing|Pin afstand 
+Pinout|Pinout
+Pins|Pins
+Play Test|Test afspelen
+Plugin API|API plugin
+Point Count|Aantal punten
+Polarity|Polariteit 
+Polarized|Gepolariseerd 
+Pole Color|Pool kleur 
+Pole Pieces|Poolstukken
+Pole Pieces 1|Poolstukken 1
+Pole Pieces 2|Poolstukken 2
+Positions|Posities 
+Positive|Positief 
+Power Rating|Nominale vermogen
+Power Strip|Voedingslijn
+Primary CT|Primaire middenaftakking
+Print...|Afdrukken...
+Project Cloud|Project cloud
+Public Announcement|Openbare aankondiging 
+Radius|Straal 
+Rail|Rail 
+Recent Files|Recente bestanden 
+Recent Updates|Recente updates 
+Redo|Opniew uitvoeren
+Renumber On Paste|Bij plakken hernummeren
+Renumber Selection|Selectie hernummeren
+Resistance|Weerstand
+Rev log|Antilog
+Reverse (standing)|Kopstaand
+Right|Rechts
+Rim|Zijwand
+Rods|Poolstaven
+Rotate Clockwise|Rechtsom draaien
+Rotate Counterclockwise|Linksom draaien
+Rotate Selection|Selectie draaien
+Round|Rond
+Round package A|Ronde behuizing A
+Round package B|Ronde behuizing B
+Row Spacing|Rijafstand
+Rows|Rijen
+Ruler Inch Subdivision. . .|Inch lineaal onderverdelen in. . .
+Same Type Only|Alleen hetzelfde type
+Save|Opslaan
+Save As|Opslaan als
+Save as Variant|Als variant opslaan
+Save to File|Opslaan
+Scale|Schaal
+Schematic Symbols|Schemasymbolen 
+Screws|Schroeven 
+Save as Building Block|Als Bouwsteen Opslaan
+Select|Selecteren
+Selection|Selectie 
+Selection Size|Selectie grootte 
+Selection is empty.|Selectie is leeg.
+Search The Cloud|Zoek in de cloud
+Searchable Tree|Doorzoekbare boom
+Secondary CT|Secundaire middenaftakking
+Select All|Alles selecteren 
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?|Geselecteerde componenten hebben de bodem van hun laag bereikt. Wilt u ze honder hun laag dwingen?
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?|Geselecteerde componenten hebben de top van hun laag bereikt. Wilt u ze boven hun laag dwingen?
+Selection contains components that cannot be mirrored. Do you want to exclude them?|Selectie bevat componenten die niet kunnen worden gespiegeld. Wil je ze uitsluiten? 
+Save as Building Block|Als bouwsteen opslaan
+Save To File|Opslaan
+Select|Selecteer
+Selection contains components that cannot be rotated. Do you want to exclude them?|Selectie bevat componenten die niet kunnen worden geroteerd. Wil je ze uitsluiten? 
+Semiconductors|Transistors
+Send Backward|Verlagen
+Send Selection to Back|Selectie naar bodem zenden
+Seven|Zeven
+Shaft Down|As naar beneden
+Shaft Up|As omhoog
+Shape|Vorm
+Shapes|Vormen
+Show Grid|Raster weergeven
+Show Rulers|Linialen weergeven
+Shroud|Beschermrand
+Shrouded|Afgeschermd
+Single Rail|Enkele rail 
+Single Rods|Enkelvoudige polen 
+Size|Maat 
+Sizing Mode|Dimensioneringsmethode
+Small-button B7G|B7G met Kleine Knop
+Smooth|Egaliseren
+Snap To|Uitlijnen op
+Soap Bar|Soap Bar
+Solid|Ononderbroken
+South|Zuid
+Spacing|Afstand
+Square|Vierkant
+Square BR-3|Vierkant BR-3
+Standard|Standaard 
+Start Arrow|Startpijl 
+Start Recording|Met opnemen beginnen
+Stereo|Stereo
+Sticky Points|Kleverige punten
+Stop Recording|Met opnemen stoppen
+Stratocaster|Stratocaster 
+Strip Color|Stripkleur 
+Stripe|Streep 
+Stripe 1|Streep 1 
+Stripe 2|Streep 2 
+Stripe Color|Streep kleur 
+Stripe Color 1|Streepkleur 1 
+Stripe Color 2|Streepkleur 2 
+Style|Stijl 
+Submit a Bug|Bugrapport indienen
+Suppressor grid|Suppressorrooster
+Switched|Geschakeld
+Switches|Schakelaars
+Tab|Tab
+Tab Border|Tabbladkleur
+Tabbed Toolbar|Werkbalk met tabbladen
+Taper|Weerstandsverloop
+Telecaster|Telecaster
+Terminal Spacing|Aansluitpunt afstand
+Terminals|Aansluitpunten
+Test|Test 
+Text|Tekst 
+Text Color|Tekstkleur 
+Theme|Thema 
+There are unsaved changes. Would you like to save them?|Er zijn niet-opgeslagen wijzigingen. Wil je ze opslaan? 
+Thickness|Breedte
+Three|Drie
+Through Hole|THT
+Tick|Maatstreep
+Title|Titel
+Toolbox|Gereedschapskist
+Top|Bovenkant
+Top Lead|Bovenste draad
+Top Left|Linksboven 
+Top Right|Rechtsboven 
+Top-to-Bottom|Boven naar beneden
+Trace|Spoor
+Trace Color|Spoorkleur
+Trace Mask|Spoormasker
+Transform Selection|Selectie transformeren
+Triangle|Driehoek 
+Tubular|Buis
+Tubes|Elektronenbuizen
+Two|Twee
+Type|Soort
+Ultra-miniature|Ultra-miniatuur
+Underside Pad Color|Kleur soldeereilandje aan onderzijde
+Underside Trace Color|Spoorkleur aan onderzijde 
+Undo|Ongedaan maken
+Ungroup Selection|Selectie degroeperen
+Unit|Metenheed
+Unlock|Ontgrendelen
+Update Axis|Grafiek-as bijwerken
+Upload A Project|Een project uploaden
+User Manual|Gebruikershandleiding
+Value|Waarde 
+Version history is not available.|Versiegeschiedenis is niet beschikbaar.
+Vertical|Verticaal 
+Vertical Alignment|Verticale uitlijning 
+Vertical Inline|Verticaal inline 
+Vertical Offset 1|Verticale offset 1 
+Vertical Offset 2|Verticale offset 2 
+View|Weergave
+Visible|Zichtbaarheid
+Voltage|Spanning
+Wafer|Dek
+Warning|Waarschuwing
+Width|Breedte 
+Winding Spacing|Wikkelafstand 
+X-axis|X-as 
+Y-axis|Y-as 
+Zoom|Zoom 
+base of 10|Tienden 
+base of 2|Achtsten
+hold %s and drag to unstick from|houd %s vast en sleep, om los te maken van
@@ -0,0 +1,460 @@
+#start-internal
+icon=brazil
+#end-internal
+(Building Blocks)|(Blocos)
+(Favorites)|(Favoritos)
+(Recently Used)|(Últimos usados)
+180 degrees clockwise|180 graus em Sentido Horário
+270 degrees clockwise|270 graus em Sentido Horário
+90 degrees clockwise|90 graus em Sentido Horário
+A variant with that name already exists. Overwrite?|já existe uma variável com este nome. Gravar por cima deste arquivo?
+About|Sobre
+Above|Acima
+Access User Files|Acessar Arquivos de usuário
+Add Flexible Leads|Adicionar Cabos Flexíveis
+Add Validation Step|Adicionar Etapa de Validação 
+All Connected|Todos conectados
+Alpha|Opacidade
+Analyze|Analizar
+Analyze Guitar Diagrams|Analizar Diagramas da Guitarra
+Angle|Ângulo
+Anti-Aliasing|Suavizado
+Arrow Size|Tamanho da Flecha
+Author|Autor
+Auto-Create Pads|Criação Automática de Pads
+Auto-Edit Mode|Modo de Edição Automática
+Base|Base
+Below|Abaixo
+Blueprint|Planta
+Board|Placa
+Boards|Placas
+Board Color|Cor da Placa
+Board Width|Largura da Placa
+Bobbin 1|Bobina 1
+Bobbin 2|Bobina 2
+Body|Corpo
+Border|Borda
+Border Thickness|Espessura da Borda
+Both|Ambos
+Both Sides|Ambos Lados
+Bottom|Abaixo
+Bottom Left|Canto Inferior Esquerdo
+Bottom Right|Canto Inferior Direito
+Bring Forward|Trazer para frente
+Bring Selection to Front|Trazer a seleção para frente 
+Buffer|Buffer
+Center|Centralizar
+Center Negative|Centro Negativo
+Center Positive|Centro Positivo
+Center Terminal|Terminal Central
+Central|Central
+Change Password|Trocar a senha
+Channel|Canal
+Chassis|Chassi
+Circular|Circular
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF|Clique em um componente para destacar a área conectada direta ou indiretamente à área abaixo do cursor. Para continuar editando, este modo necessita estar desativado
+Click on the canvas to create a new %s or press %s to cancel|Clique sobre a área de trabalho para criar um novo %s ou pressione %s para cancelar
+Click on the canvas to set the %s control point of a new %s or press %s to cancel|Clique sobre a área de trabalho para establecer o %s ponto de controle de um novo %s ou pressione %s para cancelar
+Click the lightbulb icon in the bottom-right corner of the window for more info.|Clique no ícone da lâmpada no canto inferior direito da tela para obter mais informação.
+Click to fetch the most recent public announcement|Clique para obter o anúncio público mais recente.
+Click to show recent changes and updates|Clique para ver as mudanças e atualizações recentes
+Click to toggle to the next option|Clique para a próxima opção
+Coil|Bobina
+Coil Border|Canto da bobina
+Coil Length|Comprimento da bobina
+Coil Width|Largura da bobina
+Color|Cor
+Color 1|Cor 1
+Color 2|Cor 2
+Color code|Código da cor
+Columns|Colunas
+Component|Componente
+Component API|API do componente
+Components|Componentes
+Config|Configuração
+Connector|Conector
+Connector (Mirrored)|Conector (espelhado)
+Connectivity|Conectividade
+Contacts|Contatos
+Continuous Creation|Criação Continua
+Coordinate Color|Cor das Coordenadas
+Coordinate Origin|Origem das Coordenadas
+Coordinates|Coordenadas
+Copy|Copiar
+Core|Núcleo
+Core Border|Borda do núcleo
+Core Thickness|Espessura do núcleo
+Core Width|Largura do núcleo
+Could not create a new file. Check the log for details.|Não foi possível criar um novo aqruivo. Verifique o registro para mais detalhes.
+Could not create component. Check log for details.|Não possível criar o componente. Verifique o registro para mais detalhes.
+Could not fetch public announcements.|Não foi possível obter os anúncios públicos.
+Could not save the project to file. Check the log for details.|Não foi possível salvar o projeto em um arquivo. Verifique o registro para mais detalhes.
+Could not set component type slot. Check log for details.|Não foi possível estabelecer o tipo de encaixe do componente. Verifique o registro para mais detalhes.
+Cover|Cobrir
+Create B.O.M.|Criar Lista de Materiais
+Create New Account|Criar Nova Conta
+Current|Atual
+Cut|Cortar
+Cut Between Holes|Cortar entre os furos
+Cut Orientation|Orientação do corte
+DIP (Mirrored)|DIP (espelhado)
+DP3T (Standard 3-Position Strat)|DP3T (3-Posições Padrão Stratocaster)
+DP3T (Standard 5-Position Strat)|DP3T (5-Posições Padrão Stratocaster)
+DP4T (4-Position Tele)|DP4T (4-Posições Telecaster)
+Dark|Escuro
+Dashed|Tracejado
+Decimals|Decimais
+Default|Padrão
+Default Font|Fonte Padrão
+Default Font Size|Tamanho de Fonte Padrão
+Delete Selection|Excluir Seleção
+Description|Descrição
+Diameter|Diâmetro
+Directional|Direcional
+Directly heated|Aquecido diretamente
+Display|Mostrar
+Display Pin #s|Mostrar Numeracão dos Pinos
+Dog Ear|Dog Ear
+Dot Spacing|Espaçamento de Pontos
+Dotted|Pontilhado
+Drag control point(s) of|Arrastar ponto(s) de controle
+Drag the mouse over the canvas to place a new|Arrastar o mouse sobre a área de trabalho para colocar um novo
+Dual Rail Humbucker|Dual Rail Humbucker
+Dual Rods|Barras Duplas
+Duodecar B12C|Duodecar B12C
+Duplicate|Duplicar
+Edges|Bordas
+Edit|Editar
+Edit Project Settings|Editar Configuração do Projeto
+Edit Selection|Editar Seleção
+Electrode Labels|Legenda dos Eletrodos
+Electro-Mechanical|Electromecânico
+Enable Cache Boost|Habilitar o reforço do Cache
+End Arrow|Seta Final
+Enjoying DIYLC? Click here to buy me a coffee :)|Está gostando do DIYLC? Clique aqui para tomarmos um café juntos :)
+Error|Erro
+Error occurred while editing selection. Check the log for details.|Um erro ocorreu durante a a seleção de edição. Verifique o registro para mais detalhes.
+Exit|Sair
+Expand Selection|Expandir Seleção
+Explicit Dimensions|Dimensões Explícitas
+Explicit Length|Comprimento Explícito
+Explicit Width|Largura Explícita
+Export Building Blocks|Exportar Blocos
+Export Grid|Exportar Grid
+Export Variants|Exportar Variáveis
+Export to PDF|Exportar em PDF
+Export to PNG|Exportar em PNG
+Extra Working Area|Área de Trabalho Extra
+Eyelet color|Cor do Eyelet
+FAQ|Preguntas Mais Frequentes
+File|Arquivo
+Fill|Preencher
+Filtertron|Filtertron
+Find|Localizar
+Five|Cinco
+Flip|Girar
+Folded|Dobrado
+Font|Fonte
+Font Bold|Negrito
+Font Italic|Itálico
+Font Size|Tamanho da Fonte
+Font Size Override|Substituir Tamanho da Fonte
+Four|Quatro
+Full|Cheio
+Fuse|Fusível
+Generate DIYLC Netlist|Gerar Lista de Redes DIYLC 
+Generate Spice Netlist|Gerar Lista Especial de Redes
+Grid|Grid
+Grid Spacing|Espaçamento do Grid
+Group Selection|Seleção de Grupo
+Guitar|Guitarra
+Half|Metade
+Hardware Acceleration|Aceleração do Hardware
+Heaters|Aquecedores
+Height|Altura
+Help|Ajuda
+Hi-Quality Rendering|Renderizado de Alta Qualidade
+Highlight Connected Areas|Destacar Áreas Conectadas
+Hole|Furo
+Hole Size|Tamanho do Furo	
+Hole Spacing|Espaçamento dos Furos
+Hole Size|Tamanho do Furo
+Holes per strip|Furos por cada Fileira
+Horizontal|Horizontal
+Horizontal Alignment|Alinhamento horizontal
+Horizontal Large|Horizontal Grande
+Horizontal Medium|Horizontal Médio
+Horizontal Small 1|Horizontal Pequeno 1
+Horizontal Small 2|Horizontal Pequeno 2
+Horizontal X-Small|Horizontal Extra Pequeno
+Humbucking|Humbucking
+If this box is checked application will use the current value as a<br>default when creating new components of the same type|Se esta opção estiver marcada, o aplicativo usará o valor atual como <b>valor predeterminado para criar novos componentes do mesmo tipo.
+Image|Imagem
+Immediate Only|Apenas Imediato
+Import|Importar
+Import Building Blocks|Importar Blocos
+Import Variants|Importar variações
+In-Line D-44|Em linha D-44
+In-line|Em linha
+Indent|Fenda
+Information|Informação
+Inline|Em linha
+Input error for "%s": %s|Error de entrada para "%s": %s
+Inside color|Cor interior
+Integration|Integração
+Invert polarity|Polaridade invertida
+Label|Etiqueta
+Label Color|Cor de Etiqueta
+Label Orientation|Orientação da Etiqueta
+Label Position|Posicição da Etiqueta
+Labels|Etiquetas
+Language|Idioma
+Language selection will be applied after the application is restarted.|A seleção do idioma se aplicará depois de reiniciar o aplicativo.
+Layer|Camada
+Layers|Camadas
+Lead Color|Cor do Conector
+Lead Count|Quantidade de Conectores
+Lead Length|Comprimento do Conector
+Lead Spacing|Espaçamento do Conector
+Left|Esquerda
+Left-to-Right|Da Esquerda para Direita
+Left click to instantiate this component, right click for more options|Clique com o botão esquerdo para criar uma instância deste componente, clique com o botão direito para mais opções
+Legs|Extremidades
+Length|Comprimento
+Letters|Letras
+Light|Claro
+Lin|Linear
+Lock|Bloquear
+Log|Logarítmico
+Log In|Iniciar Sessão
+Log Out|Fechar Sessão
+Look for|Localizar
+Lug Size|Tamanho do Terminal
+Lugs|Terminais
+Make a Donation|Fazer uma Doação
+Manage Account|Administrar Conta
+Manage My Uploads|Administrar meus Uploads
+Mark Common Lugs|Marcar Terminais Comuns
+Marker|Marcador
+Mini|Mini
+Miniature|Miniatura
+Mirror Horizontally|Inverter Horizontalmente
+Mirror Selection|Inverter Seleção
+Mirror Vertically|Inverter Verticalmente
+Mirroring operation will change the circuit. Do you want to continue?|A operação de inverção modificará o circuito. Deseja continuar?
+Misc|Diversos
+Model|Modelo
+Mono|Mono
+Mount|Montar
+Mounting Lugs|Terminais de Montagem
+Mouse Wheel Zoom|Zoom com a Roda do mouse
+Moveable Label|Etiqueta Móvel
+Name|Nome
+Nand|Nand
+Negative|Negativo
+New|Novo
+New version available|Nova versão disponível
+No new public announcements available.|Não há novos anúncios públicos.
+No|Não
+None|Nada 
+North|Norte
+Noval B9A|Noval B9A
+Nudge|Empurrar
+Numbers|Números
+Nut|Porca
+Octal|Octal
+Offset|Deslocamento
+One Side|Um lado
+Open|Abrir
+Opposing Points|Pontos de Oposição
+Orientation|Orientação
+Outer Foil|Lâmina Externa
+Outer Foil Mark|Marca de Lâmina Externa
+Outline Mode|Modo Esquemático
+Outside|Externo
+Oval horizontal|Oval horizontal
+Oval vertical|Oval vertical
+Pad Color|Cor do Pad
+Passive|Passivo
+Paste|Colar
+Pin Arrangement|Ordem dos Terminais
+Pin Color|Cor do Terminal
+Pin Spacing|Espaçamento dos Terminais
+Pin spacing|Espaçamento dos terminais
+Pinout|Pinagem
+Pins|Pinos
+Play Test|Realizar Teste
+Plugin API|Complemento API
+Point Count|Total de Pontos
+Polarity|Polaridade
+Polarized|Polarizado
+Pole Color|Cor do Polo
+Pole Pieces|Peças Polares
+Pole Pieces 1|Peças Polares 1
+Pole Pieces 2|Peças Polares 2
+Positions|Posições
+Positive|Positivo
+Power Rating|Potência Nominal
+Power Strip|Listra Eletrificada
+Primary CT|CT Primário
+Print...|Imprimir...
+Project Cloud|Projetos na Núvem
+Public Announcement|Anúncio Público
+Radius|Raio
+Rail|Rail
+Recent Files|Arquivos Recentes
+Recent Updates|Atualizações Recentes
+Redo|Refazer
+Renumber On Paste|Renumerar ao Colar
+Renumber Selection|Renumerar seleção
+Resistance|Resistência
+Rev log|Logarítmico Invertido
+Reverse (standing)|Invertido (em pé)
+Right|Direita
+Rim|Aro
+Rods|Barras
+Rotate Clockwise|Rotacionar em Sentido Horário
+Rotate Counterclockwise|Rotacionar em Sentido Anti-horário
+Rotate Selection|Rotacionar Seleção
+Round|Redondo
+Round WOG A|Redondo WOG A 
+Round WOG B|Redondo WOG B
+Row Spacing|Distância entre filas
+Rows|Filas
+Ruler Inch Subdivision...|Subdivisão da régua em polegadas...
+Same Type Only|Apenas o Mesmo Tipo
+Save|Salvar
+Save As|Salvar como
+Save as Variant|Salvar como Variação
+Scale|Escala
+Schematic Symbols|Símbolos Esquemáticos
+Screws|Parafusos
+Selection|Seleção
+Selection Size|Tamanho de seleção
+Selection is empty.|A seleção está vazia.
+Search The Cloud|Localizar na Nuvem
+Searchable Tree|Árvore de busca
+Secondary CT|CT Secundário
+Select All|Selecionar Tudo
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?|Componente(s) seleccionado(s) está(ão) na parte de trás da camada. Deseja forçar a seleção para trás?
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?|Componente(s) seleccionado(s) está(ão) na parte da frente da camada. Deseja forçar a seleção para frente?
+Selection contains components that cannot be mirrored. Do you want to exclude them?|A seleção contém componentes que não podem ser espelhados. Deseja excluí-los?
+Selection contains components that cannot be rotated. Do you want to exclude them?|A seleção contém componentes que não podem ser espelhados rotacionados. Deseja excluí-los?
+Semiconductors|Semicondutores
+Send Backward|Enviar para trás
+Send Selection to Back|Enviar seleção para trás
+Seven|Sete
+Shaft Down|Jogar para baixo
+Shaft Up|Jogar para cima
+Shape|Forma
+Shapes|Formas
+Show Grid|Mostrar Grid
+Show Rulers|Mostrar Réguas
+Shroud|Envoltura
+Shrouded|Envolto
+Single Rail|Um Rail
+Single Rods|Barras Simples
+Size|Tamanho
+Sizing Mode|Modo de Dimensionamento
+Small-button B7G|Botão pequeno B7G
+Smooth|Suave
+Snap To...|Ajustarse a...
+Soap Bar|Soap Bar
+Solid|Sólido
+South|Sul
+Spacing|Espaçamento
+Square|Quadrado
+Square BR-3|Quadrado BR-3
+Standard|Padrão
+Start Arrow|Seta de Início
+Start Recording|Iniciar Gravação
+Stereo|Estéreo
+Sticky Points|Pontos Agrupados
+Stop Recording|Parar Gravação
+Stratocaster|Stratocaster
+Strip Color|Cor da Tira
+Stripe|Tira 
+Stripe 1|Tira 1
+Stripe 2|Tira 2
+Stripe Color|Cor da Tira
+Stripe Color 1|Cor da Tira 1
+Stripe Color 2|Cor da Tira 2
+Style|Estilo
+Submit a Bug|Reportar um Erro
+Suppressor grid|Régua Supressora
+Switched|Conmutado
+Switches|Interruptores
+Tab|Guia
+Tab Border|Borda da Guia
+Tabbed Toolbar|Barra de Ferramentas com Guia
+Taper|Ajuste
+Telecaster|Telecaster
+Terminal Spacing|Espaçamento de Terminal
+Terminals|Terminais
+Test|Testar
+Text|Texto
+Text Color|Cor do Texto
+Theme|Tema
+There are unsaved changes. Would you like to save them?|Existem alterações que não foram salvas. Deseja salva-las?
+Thickness|Espessura
+Three|Três
+Through Hole|Terminal de Solda 
+Tick|Indicador
+Title|Título
+Toolbox|Caixa de Ferramentas
+Top|Acima
+Top Lead|Conector Superior
+Top Left|Canto Superior Esquerdo
+Top Right|Canto Superior Direito
+Top-to-Bottom|De cima para baixo
+Trace|Traçado
+Trace Color|Cor do Traçado
+Trace Mask|Máscara do traçado
+Transform Selection|Transformar seleção
+Triangle|Triângulo
+Tubular|Tubular
+Tubes|Válvulas
+Two|Dois
+Type|Tipo
+Ultra-miniature|Ultra-miniatura
+Underside Pad Color|Cor do traço  Inferior
+Underside Trace Color|Cor do traço Inferior
+Undo|Desfazer
+Ungroup Selection|Desagrupar Seleção
+Unit|Unidade
+Upload A Project|Fazer Upload de um Projeto
+User Manual|Manual de Usuário
+Value|Valor
+Version history is not available.|O histórico de versões não está disponível.
+Vertical|Vertical
+Vertical Alignment|Alinhamento Vertical
+Vertical Inline|Em linha Vertical
+Vertical Offset 1|Zig-Zag Vertical 1
+Vertical Offset 2|Zig-Zag Vertical 2
+View|Ver
+Visible|Visível
+Voltage|Voltagem
+Wafer|Wafer
+Warning|Cuidado
+Width|Largura
+Winding Spacing|Espaçamento do Enrolamento
+X-axis|Eixo X
+Y-axis|Eixo Y
+Zoom|Zoom
+base of 10|Base de 10
+base of 2|Base de 2
+hold %s and drag to unstick from|Mantenha pressionado %s e arraste para soltar
+Add a Curve|Adicionar uma Curva
+Clear|Limpar
+Insert Image|Inserir Imagem
+Load From File|Caregar do Arquivo
+Loadline Editor|Editor de Carga
+Max Current (mA)|Corrente Máxima (mA)
+Max Dissipation (W)|Disipação Máxima (W)
+Max Voltage (V)|Tensão Máxima (V)
+Save To File|Salvar no Aquivo
+Update Axis|Atualizar Eixos
+Apply Variant|Aplicar Variante
+Save as Building Block|Salvar como Bloco 
+Select|Selecionar
+Unlock|Desbloquear
@@ -0,0 +1,452 @@
+#start-internal
+icon=serbia
+#end-internal
+(Building Blocks)|(Blokovi)
+(Favorites)|(Omiljene)
+(Recently Used)|(Skoro Korišćene)
+180 degrees clockwise|(180 stepeni u pravcu kazaljke)
+270 degrees clockwise|(270 stepeni u pravcu kazaljke)
+90 degrees clockwise|(90 stepeni u pravcu kazaljke)
+A variant with that name already exists. Overwrite?|Varijacija pod tim imenom već postoji. Prepisati?
+About|O Autoru
+Above|Iznad
+Access User Files|Pristupi Korisničkim Datotekama
+Add Flexible Leads|Dodaj Fleksibilne Izvode
+Add Validation Step|Dodaj Korak Provere
+All Connected|Svi Povezani
+Alpha|Transparentnost
+Analyze|Analiziraj
+Analyze Guitar Diagrams|Analiziraj Gitarske Dijagrame
+Angle|Ugao
+Anti-Aliasing
+Arrow Size|Veličina Strelice
+Author|Autor
+Auto-Create Pads|Auto-Kreiranje Pad
+Auto-Edit Mode|Automatsko Editovanje
+Base|Osnova
+Below|Ispod
+Blueprint|Tamnoplava
+Board|Pločica
+Boards|Pločice
+Board Color|Boja Pločice
+Board Width|Širina Pločice
+Bobbin 1|Bobina 1
+Bobbin 2|Bobina 2
+Body|Telo
+Border|Ivica
+Border Thickness|Debljina Ivice
+Both|Oba
+Both Sides|Obe Strane
+Bottom|Dole
+Bottom Left|Dole Levo
+Bottom Right|Dole Desno
+Bring Forward|Prinesi Napred
+Bring Selection to Front|Prinesi Odabrane Napred
+Buffer|Bafer
+Center|Centar
+Center Negative|Negativni Centar
+Center Positive|Pozitivni Centar
+Center Terminal|Centralni Terminal
+Central|Centralni
+Change Password|Promena Lozinke
+Channel|Kanal
+Chassis|Šasija
+Circular|Kružno
+Click on a component to highlight area directly or indirectly connected to the area below the cursor. To continue editing, this mode needs to be switched OFF|Klikni na komponentu da označiš oblast direktno ili indirektno povezanu sa oblašću ispod kursora. Za dalje izmene, ovaj mod treba biti isključen
+Click on the canvas to create a new %s or press %s to cancel|Klikni na platno da kreiraš novu %s ili pritisni %s za odustajanje
+Click on the canvas to set the %s control point of a new %s or press %s to cancel|Klikni na platno da postaviš %s kontrolnu tačku nove %s ili pritisni %s za odustajanje
+Click the lightbulb icon in the bottom-right corner of the window for more info.|Klikni na ikonicu sa sijalicom u donjem-desnom uglu prozora za više informacija.
+Click to fetch the most recent public announcement|Klikni za preuzimanje najnovijih objava
+Click to show recent changes and updates|Klikni za prikaz skorih unapređenja
+Click to toggle to the next option|Klikni za prelaz za narednu opciju
+Coil|Kalem
+Coil Border|Ivica Kalema
+Coil Length|Dužina Kalema
+Coil Width|Širina Kalema
+Color|Boja
+Color 1|Boja 1
+Color 2|Boja 2
+Color code|Boje
+Columns|Kolone
+Component|Komponenta
+Component API|Komponentni API
+Components|Komponente
+Config|Konfiguracija
+Connector|Konektor
+Connector (Mirrored)|Konektor (u ogledalu)
+Connectivity|Veze
+Contacts|Kontakti
+Continuous Creation|Kontinualno Dodavanje
+Coordinate Color|Boja Koordinata
+Coordinate Origin|Položaj Koordinata
+Coordinates|Koordinate
+Copy|Kopiraj
+Core|Jezgro
+Core Border|Ivica Jezgra
+Core Thickness|Debljina Jezgra
+Core Width|Širina Jezgra
+Could not create a new file. Check the log for details.|Neuspelo kreiranje nove datoteke. Proverite log za više informacija.
+Could not create component. Check log for details.|Neuspelo dodavanje komponente. Proverite log za više informacija.
+Could not fetch public announcements.|Neuspelo preuzimanje objava.
+Could not save the project to file. Check the log for details.|Neuspelo čuvanje projekta u datoteku. Proverite log za više informacija.
+Could not set component type slot. Check log for details.|Neuspelo postavljanje komponente. Proverite log za više informacija.
+Cover|Poklopac
+Create B.O.M.|Kreiraj Spisak za Kupovinu
+Create New Account|Kreiraj Novi Nalog
+Current|Trenutni
+Cut|Iseci
+Cut Between Holes|Seci Između Rupa
+Cut Orientation|Smer Zaseka
+DIP (Mirrored)|DIP (u ogledalu)
+DP3T (Standard 3-Position Strat)
+DP3T (Standard 5-Position Strat)
+DP4T (4-Position Tele)
+Dark|Tamna
+Dashed|Isprekidana
+Decimals|Decimale
+Default|Podrazumevano
+Default Font|Podrazumevani Font
+Default Font Size|Podrazumevana Veličina Fonta
+Delete Selection|Obriši Izabrane
+Description|Opis
+Diameter|Prečnik
+Directional|Usmereni
+Directly heated|Direktno grejanje
+Display|Prikaz
+Display Pin #s|Prikaz Brojeva Pinova
+Dog Ear
+Dot Spacing|Razmak Između Tačaka
+Dotted|Tačkasta
+Drag control point(s) of|Vuci kontrolne tačke
+Drag the mouse over the canvas to place a new|Prevuci kursor miša preko platna da postaviš novu
+Dual Rail Humbucker
+Dual Rods
+Duodecar B12C
+Duplicate|Duplikat
+Edges|Ivice
+Edit|Izmena
+Edit Project Settings|Izmeni Podešavanja Projekta
+Edit Selection|Izmeni Izabrane
+Electrode Labels|Oznake Elektroda
+Electro-Mechanical|Elektro-Mehaničke
+Enable Cache Boost|Uključi Keš-Ubrzanje
+End Arrow|Krajnja Strelica
+Enjoying DIYLC? Click here to buy me a coffee :)|Uživate koristeći DIYLC? Častite me kafom :)
+Error|Greška
+Error occurred while editing selection. Check the log for details.|Nastala je greška prilikom izmene. Proverite log za više informacija.
+Exit|Izlaz
+Expand Selection|Proširi Izabrane
+Explicit Dimensions|Tačne Dimenzije
+Explicit Length|Tačna Dužina
+Explicit Width|Tačna Širina
+Export Building Blocks
+Export Grid|Izvoz Rešetke
+Export Variants|Izvoz Varijacija
+Export to PDF|Izvoz u PDF
+Export to PNG|Izvoz u PNG
+Extra Working Area|Dodatna Radna Površina
+Eyelet color|Boja Terminala
+FAQ
+File|Datoteka
+Filtertron
+Find|Traži
+Five|Pet
+Flip|Izvrni
+Folded|Ležeće
+Font
+Font Bold
+Font Italic
+Font Size|Veličina Fonta
+Font Size Override|Veličina Fonta
+Four|Četiri
+Full|Puno
+Fuse|Osigurač
+Generate DIYLC Netlist|Generiši DIYLC Netlistu
+Generate Spice Netlist|Generiši Spice Netlistu
+Grid|Rešetka
+Grid Spacing|Razmak Rešetke
+Group Selection|Odabir Grupe
+Guitar|Gitara
+Half|Pola
+Hardware Acceleration|Hardversko Ubrzanje
+Heaters|Grejaci
+Height|Visina
+Help|Pomoć
+Hi-Quality Rendering|Visoko-Kvalitetno Iscrtavanje
+Highlight Connected Areas|Označi Povezane Oblasti
+Hole|Rupa
+Hole Size|Veličina Rupe
+Hole Spacing|Razmak Rupa
+Holes per strip|Rupa Po Traci
+Horizontal|Horizontalno
+Horizontal Alignment|Horizontalno Poravnanje
+Horizontal Large|Horizontalni Veliki
+Horizontal Medium|Horizontalni Srednji
+Horizontal Small 1|Horizontalni Mali 1
+Horizontal Small 2|Horizontalni Mali 2
+Horizontal X-Small|Horizontalni Vrlo Mali
+Humbucking
+If this box is checked application will use the current value as a<br>default when creating new components of the same type|Ako je ova kutija označena, aplikacija će nadalje koristiti trenutnu<br>vrednost prilikom kreiranje novih komponenti ovog tipa
+Image|Slika
+Immediate Only|Samo Neposredne
+Import|Uvoz
+Import Building Blocks|Uvezi Blokove za Gradnju
+Import Variants|Uvezi Varijacije
+In-Line D-44|U Redu D-44
+In-line|U Redu
+Indent|Zasek
+Information|Informacije
+Inline|U Redu
+Input error for "%s": %s|Greška u unosu za "%s": %s
+Inside color|Boja Unutrašnjosti
+Integration|Integracija
+Invert polarity|Obrnuti Polaritet
+Label|Natpis
+Label Color|Boja Natpisa
+Label Orientation|Smer Natpisa
+Label Position|Pozicija Natpisa
+Labels|Natpisi
+Language|Jezik
+Language selection will be applied after the application is restarted.|Odabir jezika će biti primenjen nakon sledećeg pokretanja aplikacije.
+Layer|Sloj
+Layers|Slojevi
+Lead Color|Boja Izvoda
+Lead Count|Broj Izvoda
+Lead Length|Dužina Izvoda
+Lead Spacing|Rastojanje Izvoda
+Left|Levo
+Left-to-Right|Levo-do-Desno
+Left click to instantiate this component, right click for more options|Levi klik instancira ovu komponentu, desni klik nudi više mogućnosti
+Legs|Nožice
+Length|Dužina
+Letters|Slova
+Light|Svetla
+Lock|Zaključaj
+Log In|Prijava
+Log Out|Odjava
+Lug Size|Veličina Ušica
+Lugs|Ušice
+Make a Donation|Doniraj
+Manage Account|Upravljanje Nalogom
+Manage My Uploads|Upravljanje Mojim Projektima
+Mark Common Lugs|Označi Zajedničke Ušice
+Marker
+Mini
+Miniature|Minijaturni
+Mirror Horizontally|Preslikaj Horizontalno
+Mirror Selection|Preslikaj Izabrane
+Mirror Vertically|Preslikaj Vertikalno
+Mirroring operation will change the circuit. Do you want to continue?|Preslikavanje će uticati na kolo. Da li želite da nastavite?
+Misc|Razno
+Model
+Mono
+Mount|Montaža
+Mounting Lugs
+Mouse Wheel Zoom|Uvećanje Točkićem Miša
+Moveable Label|Pomeranje Oznake
+Name|Naziv
+Negative|Negativno
+New|Novi
+New version available|Nova verzija je dostupna
+No new public announcements available.|Nema novih javnih objava.
+No|Ne
+None|Ništa
+North|Sever
+Noval B9A
+Nudge|Pomeri
+Numbers|Brojevi
+Nut|Matica
+Octal
+Offset|Ofset
+One Side|Jedna Strana
+Open|Otvori
+Opposing Points|Suprotne Tačke
+Orientation|Smer
+Outer Foil|Prikaz Spoljne Folije
+Outer Foil Mark|Oznaka Spoljne Folije
+Outline Mode|Mod Oivičenja
+Outside|Spolja
+Oval horizontal|Ovalni Horizontalni
+Oval vertical|Ovalni Vertikalni
+Pad Color
+Passive|Pasivne
+Paste|Nalepi
+Pin Arrangement|Uređenje Pinova
+Pin Color|Boja Pina
+Pin Spacing|Razmak Pinova
+Pinout
+Pins|Pinovi
+Play Test|Izvršavanje Testa
+Plugin API
+Point Count|Broj Tačaka
+Polarity|Polaritet
+Polarized|Polarizovani
+Pole Color|Boja Šipkica
+Pole Pieces|Šipkice
+Pole Pieces 1|Šipkice 1
+Pole Pieces 2|Šipkice 2
+Positions|Pozicije
+Positive|Pozitivni
+Power Rating|Snaga
+Power Strip|Naponska Magistrala
+Primary CT|Primarni Srednji Izvod
+Print...|Štampa...
+Project Cloud|Projektni Oblak
+Public Announcement|Javna Objava
+Radius|Poluprečnik
+Rail|Šina
+Recent Files|Skorašnje Datoteke
+Recent Updates|Skorašnja Unapređenja
+Redo|Korak Napred
+Renumber On Paste|Dodale Brojeva Nakon Nalepljivanja
+Renumber Selection|Dodeli Nove Brojeve
+Resistance|Otpor
+Reverse (standing)|Izvrni (stajanje)
+Right|Desno
+Rim|Obod
+Rods|Šipkice
+Rotate Clockwise|Rotiraj u Smeru Kazaljke
+Rotate Counterclockwise|Rotiraj Suprotno od Smera Kazaljke
+Rotate Selection|Rotiraj Izabrane
+Round|Okrugli
+Round WOG A
+Round WOG B
+Row Spacing|Razmak Između Vrsta
+Rows|Vrste
+Ruler Inch Subdivision...|Deljenje Inča Na Lenjiru
+Same Type Only|Samo Istog Tipa
+Save|Sačuvaj
+Save As|Sačuvaj Kao
+Save as Variant|Sačuvaj Kao Varijaciju
+Scale|Razmer
+Schematic Symbols|Simboli Šema
+Screws|Šrafovi
+Selection|Izabrano
+Selection Size|Veličina Izabranih
+Selection is empty.|Nema izabranih komponenti.
+Search The Cloud|Pretraga Oblaka
+Searchable Tree|Stablo sa Pretragom
+Secondary CT|Sekundarni Srednji Izvod
+Select All|Odaberi Sve
+Selected component(s) have reached the bottom of their layer. Do you want to force the selection to the back?|Izabrane komponente su stigle do dna svog sloja. Da li želite da ih na silu pošaljete ispod?
+Selected component(s) have reached the top of their layer. Do you want to force the selection to the top?|Izabrane komponente su stigle do vrha svog sloja. Da li želite da ih na silu pošaljete iznad?
+Selection contains components that cannot be mirrored. Do you want to exclude them?|Neke od izabranih komponenti ne mogu biti preslikane. Da li želite da ih preskočite?
+Selection contains components that cannot be rotated. Do you want to exclude them?|Neke od izabranih komponenti ne mogu biti rotirane. Da li želite da ih preskočite?
+Semiconductors|Poluprovodnici
+Send Backward|Pošalji Nazad
+Send Selection to Back|Pošalji Izabrane Nazad
+Seven|Sedam
+Shaft Down|Osovina Dole
+Shaft Up|Osovina Gore
+Shape|Oblik
+Shapes|Oblici
+Show Grid|Prikaz Rešetke
+Show Rulers|Prikaz Lenjira
+Shroud|Kućište
+Shrouded|Sa Kućištem
+Single Rail|Single - Šina
+Single Rods|Single - Šipkice
+Size|Veličina
+Sizing Mode|Zadavanje Veličine
+Small-button B7G
+Smooth|Glatko
+Snap To|Zalepi Uz
+Soap Bar
+Solid|Puna Linija
+South|Jug
+Spacing|Razmak
+Square|Kvadrat
+Square BR-3
+Standard|Standardno
+Start Arrow|Početna Strelica
+Start Recording|Kreni Snimanje
+Stereo
+Sticky Points|Lepljive Kontrolne Tačke
+Stop Recording|Zaustavi Snimanje
+Stratocaster
+Strip Color|Boja Magistrala
+Stripe|Štrafte
+Stripe 1|Štrafte 1
+Stripe 2|Štrafte 2
+Stripe Color|Boja Štrafte
+Stripe Color 1|Boja Štrafte 1
+Stripe Color 2|Boja Štrafte 2
+Style|Stil
+Submit a Bug|Prijavi Problem
+Suppressor grid|Treća Rešetka
+Switched|Sa Prekidačem
+Switches|Prekidači
+Tab|Hladnjak
+Tab Border|Ivica Hladnjaka
+Tabbed Toolbar|Kartice
+Taper
+Telecaster
+Terminal Spacing|Rastojanje Terminala
+Terminals|Terminali
+Test
+Text|Tekst
+Text Color|Boja Teksta
+Theme|Tema
+There are unsaved changes. Would you like to save them?|Ima nesačuvanih izmena. Da li želite da ih sačuvate?
+Thickness|Debljinja
+Three|Tri
+Through Hole|Kroz Rupu
+Tick|Crtica
+Title|Naslov
+Toolbox|Kutija sa Alatima
+Top|Vrh
+Top Lead|Gornji Izvod
+Top Left|Gore Levo
+Top Right|Gore Desno
+Top-to-Bottom|Gore-do-Dole
+Trace|Vod
+Trace Color|Boja Voda
+Trace Mask|Maska Vodova
+Transform Selection|Transformiši Izabrane
+Triangle|Trougao
+Tubular|Cevasti
+Tubes|Cevi
+Two|Dva
+Type|Tip
+Ultra-miniature|Ultra-minijaturni
+Underside Pad Color
+Underside Trace Color
+Undo|Korak Nazad
+Ungroup Selection|Odgrupiši Izabrane
+Unit|Jedinica
+Upload A Project|Slanje Projekta
+User Manual|Korisničko Uputsvo
+Value|Vrednost
+Version history is not available.|Istorija verzija nije dostupna.
+Vertical|Verikalno
+Vertical Alignment|Vertikalno Poravnanje
+Vertical Inline|Vertikalno u Liniji
+Vertical Offset 1|Verikalni Ofset 1
+Vertical Offset 2|Vertikalni Ofset 2
+View|Pogled
+Visible|Vidljivo
+Voltage|Napon
+Wafer|Izolator
+Warning|Upozorenje
+Width|Širina
+Winding Spacing
+X-axis|X-osa
+Y-axis|Y-osa
+Zoom|Uveličanje
+base of 10|Osnova 10
+base of 2|Osnova 2
+hold %s and drag to unstick from|Drži %s i vuci da odlepiš od
+Add a Curve|Dodaj Krivu
+Clear|Očisti
+Insert Image|Dodaj Sliku
+Load From File|Učitaj iz Datoteke
+Loadline Editor|Editor Loadline
+Max Current (mA)|Maks. Struja (mA)
+Max Dissipation (W)|Maks. Snaga (W)
+Max Voltage (V)|Maks. Napon (V)
+Save To File|Sačuvaj u Datoteku
+Update Axis|Osveži Ose
+Apply Variant|Primeni Varijaciju
+Save as Building Block|Sačuvaj Kao Blok
+Select|Izaberi
+Unlock|Otključaj
				`@@ -0,0 +1 @@`
				`-Xms512m -Xmx4096m -Dorg.diylc.scriptRun=true -Dfile.encoding=UTF-8`