mirror of
https://github.com/bancika/diy-layout-creator
synced 2026-11-07 12:24:58 +10:00
chassis improvements
This commit is contained in:
Bane Stojkovic
+242
-220
@@ -7142,45 +7142,6 @@
|
||||
"label" : "-"
|
||||
} ]
|
||||
}
|
||||
}, {
|
||||
"name" : "Chassis Panel",
|
||||
"className" : "chassis.ChassisPanel",
|
||||
"category" : "Electro-Mechanical",
|
||||
"namePrefix" : "CP",
|
||||
"description" : "One side of a chassis, with or withouth rounded edges",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"notes" : [ "Each instance is one side of the chassis: an exploded view of a whole chassis takes five panels, while the top, front and back alone take three, which is typical for pedals and amplifiers. The top panel goes in the centre with the front panel against its upper edge and the back panel against its lower edge; in the five-panel view the left side panel goes against its left edge and the right side panel against its right edge", "The panel is not conductive in the netlist: jacks, pots and lugs drawn on it are not joined through it, so chassis ground points must be connected explicitly" ],
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#EEEEEE"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
}, {
|
||||
"name" : "Radius",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0mm"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Cliff 1/4\" Jack",
|
||||
"className" : "electromechanical.CliffJack1_4",
|
||||
@@ -7672,66 +7633,6 @@
|
||||
}
|
||||
} ]
|
||||
}
|
||||
}, {
|
||||
"name" : "Drill Hole",
|
||||
"className" : "electromechanical.DrillHole",
|
||||
"category" : "Electro-Mechanical",
|
||||
"namePrefix" : "Hole",
|
||||
"description" : "Drill hole marker for PCB, chassis or faceplate",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#000000"
|
||||
}, {
|
||||
"name" : "Diameter",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "3mm"
|
||||
} ],
|
||||
"pinout" : {
|
||||
"pinCount" : 1,
|
||||
"labels" : "none"
|
||||
}
|
||||
}, {
|
||||
"name" : "Elliptical Cutout",
|
||||
"className" : "chassis.EllipticalCutout",
|
||||
"category" : "Electro-Mechanical",
|
||||
"namePrefix" : "ELC",
|
||||
"description" : "Elliptical chassis cutout",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#FFFFFF"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Fuse Holder (Panel)",
|
||||
"className" : "electromechanical.FuseHolderPanel",
|
||||
@@ -8632,43 +8533,6 @@
|
||||
"label" : "Center"
|
||||
} ]
|
||||
}
|
||||
}, {
|
||||
"name" : "Polygonal Cutout",
|
||||
"className" : "chassis.PolygonalCutout",
|
||||
"category" : "Electro-Mechanical",
|
||||
"namePrefix" : "POLYC",
|
||||
"description" : "Polygonal chassis cutout",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#FFFFFF"
|
||||
}, {
|
||||
"name" : "Edges",
|
||||
"type" : "PointCount",
|
||||
"possibleValues" : [ "_3", "_4", "_5", "_6", "_7", "_8" ],
|
||||
"defaultValue" : "_4"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "RCA Jack",
|
||||
"className" : "electromechanical.RCAJack",
|
||||
@@ -8700,44 +8564,6 @@
|
||||
"label" : "Sleeve"
|
||||
} ]
|
||||
}
|
||||
}, {
|
||||
"name" : "Rectangular Cutout",
|
||||
"className" : "chassis.RectangularCutout",
|
||||
"category" : "Electro-Mechanical",
|
||||
"namePrefix" : "RECTC",
|
||||
"description" : "Rectangular chassis cutout, with or without rounded edges",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#FFFFFF"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
}, {
|
||||
"name" : "Radius",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0mm"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Rotary Selector Switch",
|
||||
"className" : "electromechanical.RotarySelectorSwitch",
|
||||
@@ -11587,6 +11413,248 @@
|
||||
"label" : "South Start"
|
||||
} ]
|
||||
}
|
||||
}, {
|
||||
"name" : "Dial Scale",
|
||||
"className" : "chassis.DialScale",
|
||||
"category" : "Hardware",
|
||||
"namePrefix" : "DS",
|
||||
"description" : "Control panel dial scale",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#000000"
|
||||
}, {
|
||||
"name" : "Diameter",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "1in"
|
||||
}, {
|
||||
"name" : "Font",
|
||||
"type" : "Font"
|
||||
}, {
|
||||
"name" : "Marker Size",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.1in"
|
||||
}, {
|
||||
"name" : "Tick Width",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.5mm"
|
||||
}, {
|
||||
"name" : "Type",
|
||||
"type" : "DialScaleType",
|
||||
"possibleValues" : [ "Ticks_Mixed", "Ticks", "Ticks_0_5_5_11", "Dots", "Dots_Gradual", "Numeric_0_10", "Numeric_1_11", "Numeric_1_10", "Numeric_1_12", "Numeric_Even", "Numeric_Even_Ticks" ],
|
||||
"defaultValue" : "Ticks"
|
||||
}, {
|
||||
"name" : "Value",
|
||||
"type" : "String"
|
||||
} ],
|
||||
"pinout" : {
|
||||
"pinCount" : 1,
|
||||
"labels" : "none"
|
||||
}
|
||||
}, {
|
||||
"name" : "Drill Hole",
|
||||
"className" : "electromechanical.DrillHole",
|
||||
"category" : "Hardware",
|
||||
"namePrefix" : "Hole",
|
||||
"description" : "Drill hole marker for PCB, chassis or faceplate",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#000000"
|
||||
}, {
|
||||
"name" : "Diameter",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "3mm"
|
||||
} ],
|
||||
"pinout" : {
|
||||
"pinCount" : 1,
|
||||
"labels" : "none"
|
||||
}
|
||||
}, {
|
||||
"name" : "Elliptical Cutout",
|
||||
"className" : "chassis.EllipticalCutout",
|
||||
"category" : "Hardware",
|
||||
"namePrefix" : "ELC",
|
||||
"description" : "Elliptical chassis cutout",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#FFFFFF"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Enclosure",
|
||||
"className" : "chassis.ChassisPanel",
|
||||
"category" : "Hardware",
|
||||
"namePrefix" : "ENC",
|
||||
"description" : "Top panel of an enclosure or chassis, optionally with its sides unfolded",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"notes" : [ "The two control points are opposite corners of the enclosure's top panel. With 'Height' above zero the sides are unfolded around it as an exploded view, each as tall as 'Height' and set 'Spacing' apart from it: the front against the top panel's upper edge, the back against its lower edge and, when 'Sides' is All, the left and right sides against its left and right edges. The bottom is never drawn. With 'Sides' set to None, or 'Height' at zero, it is a single flat panel of any size, such as one side of a chassis drawn on its own", "The enclosure is not conductive in the netlist: jacks, pots and lugs drawn on it are not joined through it, so chassis ground points must be connected explicitly", "A datasheet model is a Hammond enclosure part number such as 1590BB, 1550B or 1444-32, or a generic size such as 125B, and is stored as 'Value'; it sets the top panel to the enclosure's length and width, upright for pedal-sized die-cast boxes up to 125 mm long and horizontal for bigger boxes and amplifier chassis and 'Height' to its wall height. 125B is a generic size sold by several makers; its Hammond equivalent is 1590N1" ],
|
||||
"datasheetModels" : [ "1590LLB", "1590LB", "1590H", "1590Y", "1590A", "1590G", "1590G2", "1590S", "1590B", "1590B2", "1590BS", "1590B3", "1590BB", "1590BB2", "1590BBS", "1590Q", "1590U", "1590V", "1590C", "1590T", "1590CE", "1590N1", "1590KK", "1590K", "1590J", "1590XX", "1590X", "1590P1", "1590D", "1590DD", "1590E", "1590F", "1590R1", "1590DE", "1590EE", "1590BX2", "1590BX", "1550Q", "1550P", "1550A", "1550B", "1550D", "1550C", "1550M", "1550K", "1550L", "1550E", "1550F", "1550G", "1550H", "1550N", "1550J", "125B", "1441-9", "1441-15", "1441-6", "1441-8", "1441-12", "1441-10", "1441-14", "1441-16", "1441-22", "1441-29", "1441-18", "1441-26", "1441-30", "1441-34", "1441-24", "1441-28", "1441-20", "1441-32", "1441-36", "1441-38", "1441-33", "1441-40", "1441-42", "1444-45351", "1444-9", "1444-15", "1444-6415", "1444-84515", "1444-6", "1444-542", "1444-8", "1444-12", "1444-772", "1444-10", "1444-862", "1444-14", "1444-972", "1444-9552", "1444-16", "1444-1172", "1444-22", "1444-29", "1444-1372", "1444-18", "1444-26", "1444-30", "1444-17132", "1444-95525", "1444-10825", "1444-12825", "1444-643", "1444-753", "1444-9553", "1444-1053", "1444-1273", "1444-24", "1444-12103", "1444-12123", "1444-1463", "1444-14103", "1444-1573", "1444-1593", "1444-28", "1444-20", "1444-1763", "1444-1773", "1444-1783", "1444-32", "1444-17123", "1444-17133", "1444-17143", "1444-17173", "1444-33", "1444-17134", "1444-17154", "1444-17174", "1444-17105", "1444-17135", "1444-17156" ],
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#EEEEEE"
|
||||
}, {
|
||||
"name" : "Height",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "36mm"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
}, {
|
||||
"name" : "Radius",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0mm"
|
||||
}, {
|
||||
"name" : "Sides",
|
||||
"type" : "Sides",
|
||||
"possibleValues" : [ "ALL", "FRONT_AND_BACK", "NONE" ],
|
||||
"defaultValue" : "ALL"
|
||||
}, {
|
||||
"name" : "Spacing",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0mm"
|
||||
}, {
|
||||
"name" : "Value",
|
||||
"type" : "String",
|
||||
"defaultValue" : "125B"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Polygonal Cutout",
|
||||
"className" : "chassis.PolygonalCutout",
|
||||
"category" : "Hardware",
|
||||
"namePrefix" : "POLYC",
|
||||
"description" : "Polygonal chassis cutout",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#FFFFFF"
|
||||
}, {
|
||||
"name" : "Edges",
|
||||
"type" : "PointCount",
|
||||
"possibleValues" : [ "_3", "_4", "_5", "_6", "_7", "_8" ],
|
||||
"defaultValue" : "_4"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Rectangular Cutout",
|
||||
"className" : "chassis.RectangularCutout",
|
||||
"category" : "Hardware",
|
||||
"namePrefix" : "RECTC",
|
||||
"description" : "Rectangular chassis cutout, with or without rounded edges",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Alpha",
|
||||
"type" : "Percentage",
|
||||
"format" : "number without the % sign, e.g. 100",
|
||||
"defaultValue" : "100"
|
||||
}, {
|
||||
"name" : "Border",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#A6A6A6"
|
||||
}, {
|
||||
"name" : "Border Thickness",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.2mm"
|
||||
}, {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#FFFFFF"
|
||||
}, {
|
||||
"name" : "Name",
|
||||
"type" : "String"
|
||||
}, {
|
||||
"name" : "Radius",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0mm"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Auto-Wrap Label",
|
||||
"className" : "misc.WrapLabel",
|
||||
@@ -11688,52 +11756,6 @@
|
||||
"type" : "String",
|
||||
"defaultValue" : "X"
|
||||
} ]
|
||||
}, {
|
||||
"name" : "Dial Scale",
|
||||
"className" : "chassis.DialScale",
|
||||
"category" : "Misc",
|
||||
"namePrefix" : "DS",
|
||||
"description" : "Control panel dial scale",
|
||||
"creationMethod" : "SINGLE_CLICK",
|
||||
"properties" : [ {
|
||||
"name" : "Color",
|
||||
"type" : "Color",
|
||||
"format" : "hex",
|
||||
"defaultValue" : "#000000"
|
||||
}, {
|
||||
"name" : "Diameter",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "1in"
|
||||
}, {
|
||||
"name" : "Font",
|
||||
"type" : "Font"
|
||||
}, {
|
||||
"name" : "Marker Size",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.1in"
|
||||
}, {
|
||||
"name" : "Tick Width",
|
||||
"type" : "Size",
|
||||
"format" : "(value)(unit)",
|
||||
"possibleUnits" : [ "px", "mm", "cm", "m", "in", "ft", "yd" ],
|
||||
"defaultValue" : "0.5mm"
|
||||
}, {
|
||||
"name" : "Type",
|
||||
"type" : "DialScaleType",
|
||||
"possibleValues" : [ "Ticks_Mixed", "Ticks", "Ticks_0_5_5_11", "Dots", "Dots_Gradual", "Numeric_0_10", "Numeric_1_11", "Numeric_1_10", "Numeric_1_12", "Numeric_Even", "Numeric_Even_Ticks" ],
|
||||
"defaultValue" : "Ticks"
|
||||
}, {
|
||||
"name" : "Value",
|
||||
"type" : "String"
|
||||
} ],
|
||||
"pinout" : {
|
||||
"pinCount" : 1,
|
||||
"labels" : "none"
|
||||
}
|
||||
}, {
|
||||
"name" : "Image",
|
||||
"className" : "misc.Image",
|
||||
|
||||
+19
-18
@@ -174,9 +174,6 @@
|
||||
}, {
|
||||
"name" : "9V Battery Snap",
|
||||
"className" : "electromechanical.BatterySnap9V"
|
||||
}, {
|
||||
"name" : "Chassis Panel",
|
||||
"className" : "chassis.ChassisPanel"
|
||||
}, {
|
||||
"name" : "Cliff 1/4\" Jack",
|
||||
"className" : "electromechanical.CliffJack1_4"
|
||||
@@ -189,12 +186,6 @@
|
||||
}, {
|
||||
"name" : "DIP Switch",
|
||||
"className" : "electromechanical.DIPSwitch"
|
||||
}, {
|
||||
"name" : "Drill Hole",
|
||||
"className" : "electromechanical.DrillHole"
|
||||
}, {
|
||||
"name" : "Elliptical Cutout",
|
||||
"className" : "chassis.EllipticalCutout"
|
||||
}, {
|
||||
"name" : "Fuse Holder (Panel)",
|
||||
"className" : "electromechanical.FuseHolderPanel"
|
||||
@@ -225,15 +216,9 @@
|
||||
}, {
|
||||
"name" : "Plastic DC Jack",
|
||||
"className" : "electromechanical.PlasticDCJack"
|
||||
}, {
|
||||
"name" : "Polygonal Cutout",
|
||||
"className" : "chassis.PolygonalCutout"
|
||||
}, {
|
||||
"name" : "RCA Jack",
|
||||
"className" : "electromechanical.RCAJack"
|
||||
}, {
|
||||
"name" : "Rectangular Cutout",
|
||||
"className" : "chassis.RectangularCutout"
|
||||
}, {
|
||||
"name" : "Rotary Selector Switch",
|
||||
"className" : "electromechanical.RotarySelectorSwitch"
|
||||
@@ -293,6 +278,25 @@
|
||||
"name" : "Stingray Bass Pickup",
|
||||
"className" : "guitar.StingrayBassPickup"
|
||||
} ],
|
||||
"Hardware" : [ {
|
||||
"name" : "Dial Scale",
|
||||
"className" : "chassis.DialScale"
|
||||
}, {
|
||||
"name" : "Drill Hole",
|
||||
"className" : "electromechanical.DrillHole"
|
||||
}, {
|
||||
"name" : "Elliptical Cutout",
|
||||
"className" : "chassis.EllipticalCutout"
|
||||
}, {
|
||||
"name" : "Enclosure",
|
||||
"className" : "chassis.ChassisPanel"
|
||||
}, {
|
||||
"name" : "Polygonal Cutout",
|
||||
"className" : "chassis.PolygonalCutout"
|
||||
}, {
|
||||
"name" : "Rectangular Cutout",
|
||||
"className" : "chassis.RectangularCutout"
|
||||
} ],
|
||||
"Misc" : [ {
|
||||
"name" : "Auto-Wrap Label",
|
||||
"className" : "misc.WrapLabel"
|
||||
@@ -302,9 +306,6 @@
|
||||
}, {
|
||||
"name" : "Common Node",
|
||||
"className" : "misc.CommonNode"
|
||||
}, {
|
||||
"name" : "Dial Scale",
|
||||
"className" : "chassis.DialScale"
|
||||
}, {
|
||||
"name" : "Image",
|
||||
"className" : "misc.Image"
|
||||
|
||||
@@ -1902,111 +1902,19 @@
|
||||
<list>
|
||||
<org.diylc.core.Template>
|
||||
<name>125B</name>
|
||||
<values>
|
||||
<entry>
|
||||
<string>Radius</string>
|
||||
<org.diylc.core.measures.Size value="5.0" unit="mm"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Color</string>
|
||||
<awt-color hex="eeeeee"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border</string>
|
||||
<awt-color hex="a6a6a6"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border Thickness</string>
|
||||
<org.diylc.core.measures.Size value="0.2" unit="mm"/>
|
||||
</entry>
|
||||
</values>
|
||||
<points>
|
||||
<point x="0.0" y="0.0"/>
|
||||
<point x="4.815" y="2.64"/>
|
||||
</points>
|
||||
<defaultFlag>false</defaultFlag>
|
||||
<createdOn>2022-10-30T13:25:15.3894874</createdOn>
|
||||
<deletedOn>2026-11-01T23:00:00</deletedOn>
|
||||
</org.diylc.core.Template>
|
||||
<org.diylc.core.Template>
|
||||
<name>A</name>
|
||||
<values>
|
||||
<entry>
|
||||
<string>Radius</string>
|
||||
<org.diylc.core.measures.Size value="5.0" unit="mm"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Color</string>
|
||||
<awt-color hex="eeeeee"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border</string>
|
||||
<awt-color hex="a6a6a6"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border Thickness</string>
|
||||
<org.diylc.core.measures.Size value="0.2" unit="mm"/>
|
||||
</entry>
|
||||
</values>
|
||||
<points>
|
||||
<point x="0.0" y="0.0"/>
|
||||
<point x="3.545" y="1.525"/>
|
||||
</points>
|
||||
<defaultFlag>false</defaultFlag>
|
||||
<createdOn>2022-10-30T13:25:15.3894874</createdOn>
|
||||
<deletedOn>2026-11-01T23:00:00</deletedOn>
|
||||
</org.diylc.core.Template>
|
||||
<org.diylc.core.Template>
|
||||
<name>B</name>
|
||||
<values>
|
||||
<entry>
|
||||
<string>Radius</string>
|
||||
<org.diylc.core.measures.Size value="5.0" unit="mm"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Color</string>
|
||||
<awt-color hex="eeeeee"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border</string>
|
||||
<awt-color hex="a6a6a6"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border Thickness</string>
|
||||
<org.diylc.core.measures.Size value="0.2" unit="mm"/>
|
||||
</entry>
|
||||
</values>
|
||||
<points>
|
||||
<point x="0.0" y="0.0"/>
|
||||
<point x="4.41" y="2.36"/>
|
||||
</points>
|
||||
<defaultFlag>false</defaultFlag>
|
||||
<createdOn>2022-10-30T13:25:15.3894874</createdOn>
|
||||
<deletedOn>2026-11-01T23:00:00</deletedOn>
|
||||
</org.diylc.core.Template>
|
||||
<org.diylc.core.Template>
|
||||
<name>BB</name>
|
||||
<values>
|
||||
<entry>
|
||||
<string>Radius</string>
|
||||
<org.diylc.core.measures.Size value="5.0" unit="mm"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Color</string>
|
||||
<awt-color hex="eeeeee"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border</string>
|
||||
<awt-color hex="a6a6a6"/>
|
||||
</entry>
|
||||
<entry>
|
||||
<string>Border Thickness</string>
|
||||
<org.diylc.core.measures.Size value="0.2" unit="mm"/>
|
||||
</entry>
|
||||
</values>
|
||||
<points>
|
||||
<point x="0.0" y="0.0"/>
|
||||
<point x="4.695" y="3.69"/>
|
||||
</points>
|
||||
<defaultFlag>false</defaultFlag>
|
||||
<createdOn>2022-10-30T13:25:15.3894874</createdOn>
|
||||
<deletedOn>2026-11-01T23:00:00</deletedOn>
|
||||
</org.diylc.core.Template>
|
||||
</list>
|
||||
</entry>
|
||||
|
||||
@@ -525,6 +525,18 @@
|
||||
<changeType>NEW_FEATURE</changeType>
|
||||
<description>Added datasheets to 'DIP IC', 'SIP IC' and 'Multiwatt IC' - pick a part by its number from the component's submenu to set its pin count, spacing and pin names at once; the AI Assistant can place these parts by part number too</description>
|
||||
</org.diylc.appframework.update.Change>
|
||||
<org.diylc.appframework.update.Change>
|
||||
<changeType>NEW_FEATURE</changeType>
|
||||
<description>'Chassis Panel' is now 'Enclosure' and can draw an exploded view of the whole box; set 'Height' and choose which 'Sides' to unfold</description>
|
||||
</org.diylc.appframework.update.Change>
|
||||
<org.diylc.appframework.update.Change>
|
||||
<changeType>NEW_FEATURE</changeType>
|
||||
<description>Added a datasheet to 'Enclosure' with Hammond 1590, 1550, 1441 and 1444 enclosures and the 125B size</description>
|
||||
</org.diylc.appframework.update.Change>
|
||||
<org.diylc.appframework.update.Change>
|
||||
<changeType>IMPROVEMENT</changeType>
|
||||
<description>Moved 'Enclosure', cutouts, 'Drill Hole' and 'Dial Scale' to the new 'Hardware' category</description>
|
||||
</org.diylc.appframework.update.Change>
|
||||
<org.diylc.appframework.update.Change>
|
||||
<changeType>BUG_FIX</changeType>
|
||||
<description>'DIP IC' with 'Display Pin #s' set to 'No' numbered its pins in the wrong order in netlists and AI analysis, e.g. pin 8 of an 8-pin IC was reported as pin 5</description>
|
||||
|
||||
@@ -21,15 +21,17 @@
|
||||
*/
|
||||
package org.diylc.components.chassis;
|
||||
|
||||
import java.awt.AlphaComposite;
|
||||
import java.awt.Composite;
|
||||
import java.awt.Graphics2D;
|
||||
import java.awt.geom.Point2D;
|
||||
import java.awt.geom.Rectangle2D;
|
||||
|
||||
import org.diylc.common.ObjectCache;
|
||||
import org.diylc.components.shapes.AbstractShape;
|
||||
import org.diylc.components.transform.SimpleComponentTransformer;
|
||||
import org.diylc.core.ComponentState;
|
||||
import org.diylc.core.IDIYComponent;
|
||||
import org.diylc.core.IDatasheetSupport;
|
||||
import org.diylc.core.IDrawingObserver;
|
||||
import org.diylc.core.Project;
|
||||
import org.diylc.core.annotations.AiNote;
|
||||
@@ -39,21 +41,83 @@ import org.diylc.core.annotations.EditableProperty;
|
||||
import org.diylc.core.measures.Size;
|
||||
import org.diylc.core.measures.SizeUnit;
|
||||
|
||||
@AiNote("Each instance is one side of the chassis: an exploded view of a whole chassis takes five panels, while the top, front and back alone take three, which is typical for pedals and amplifiers. The top panel goes in the centre with the front panel against its upper edge and the back panel against its lower edge; in the five-panel view the left side panel goes against its left edge and the right side panel against its right edge")
|
||||
@AiNote("The panel is not conductive in the netlist: jacks, pots and lugs drawn on it are not joined through it, so chassis ground points must be connected explicitly")
|
||||
@ComponentDescriptor(name = "Chassis Panel", author = "Branislav Stojkovic", category = "Electro-Mechanical",
|
||||
instanceNamePrefix = "CP", description = "One side of a chassis, with or withouth rounded edges",
|
||||
@AiNote("The two control points are opposite corners of the enclosure's top panel. With 'Height' above zero the sides are unfolded around it as an exploded view, each as tall as 'Height' and set 'Spacing' apart from it: the front against the top panel's upper edge, the back against its lower edge and, when 'Sides' is All, the left and right sides against its left and right edges. The bottom is never drawn. With 'Sides' set to None, or 'Height' at zero, it is a single flat panel of any size, such as one side of a chassis drawn on its own")
|
||||
@AiNote("The enclosure is not conductive in the netlist: jacks, pots and lugs drawn on it are not joined through it, so chassis ground points must be connected explicitly")
|
||||
@AiNote("A datasheet model is a Hammond enclosure part number such as 1590BB, 1550B or 1444-32, or a generic size such as 125B, and is stored as 'Value'; it sets the top panel to the enclosure's length and width, upright for pedal-sized die-cast boxes up to 125 mm long and horizontal for bigger boxes and amplifier chassis and 'Height' to its wall height. 125B is a generic size sold by several makers; its Hammond equivalent is 1590N1")
|
||||
@ComponentDescriptor(name = "Enclosure", author = "Branislav Stojkovic", category = "Hardware",
|
||||
instanceNamePrefix = "ENC",
|
||||
description = "Top panel of an enclosure or chassis, optionally with its sides unfolded",
|
||||
zOrder = IDIYComponent.CHASSIS, bomPolicy = BomPolicy.SHOW_ONLY_TYPE_NAME, autoEdit = false,
|
||||
transformer = SimpleComponentTransformer.class)
|
||||
public class ChassisPanel extends AbstractShape {
|
||||
transformer = SimpleComponentTransformer.class, enableDatasheet = true,
|
||||
datasheetCreationStepCount = 2, datasheetModelColumn = 1)
|
||||
public class ChassisPanel extends AbstractShape implements IDatasheetSupport {
|
||||
|
||||
private static final long serialVersionUID = 1L;
|
||||
|
||||
protected Size edgeRadius = new Size(0d, SizeUnit.mm);
|
||||
// a new enclosure is a 125B, the most common pedal enclosure, upright as in its datasheet row
|
||||
public static String DEFAULT_MODEL = "125B";
|
||||
public static Size DEFAULT_TOP_WIDTH = new Size(66d, SizeUnit.mm);
|
||||
public static Size DEFAULT_TOP_LENGTH = new Size(122d, SizeUnit.mm);
|
||||
public static Size DEFAULT_WALL_HEIGHT = new Size(36d, SizeUnit.mm);
|
||||
public static Size DEFAULT_RADIUS = new Size(0d, SizeUnit.mm);
|
||||
public static Size DEFAULT_SPACING = new Size(0d, SizeUnit.mm);
|
||||
|
||||
protected Size edgeRadius = DEFAULT_RADIUS;
|
||||
private Size height = DEFAULT_WALL_HEIGHT;
|
||||
private Sides sides = Sides.ALL;
|
||||
private Size spacing = DEFAULT_SPACING;
|
||||
|
||||
public ChassisPanel() {
|
||||
this.color = LIGHT_METAL_COLOR;
|
||||
this.borderColor = LIGHT_METAL_COLOR.darker();
|
||||
this.value = DEFAULT_MODEL;
|
||||
setControlPoint(new Point2D.Double(DEFAULT_TOP_WIDTH.convertToPixels(),
|
||||
DEFAULT_TOP_LENGTH.convertToPixels()), 1);
|
||||
}
|
||||
|
||||
public ChassisPanel(String[] model) {
|
||||
this();
|
||||
|
||||
applyModel(model);
|
||||
}
|
||||
|
||||
// columns: group, model, top panel size along x and along y, wall height. The wall height leaves out the lid, which is the bottom left out of the view. Pedal-sized boxes
|
||||
// are listed upright, as pedals use them, and the bigger ones horizontal
|
||||
@Override
|
||||
public void applyModel(String[] model) {
|
||||
setModel(model[1]);
|
||||
setHeight(Size.parseSize(model[4]));
|
||||
// the first control point stays put and the top panel keeps the direction it is drawn in
|
||||
Point2D first = controlPoints[0];
|
||||
Point2D second = controlPoints[1];
|
||||
double x = Size.parseSize(model[2]).convertToPixels();
|
||||
double y = Size.parseSize(model[3]).convertToPixels();
|
||||
setControlPoint(new Point2D.Double(first.getX() + (second.getX() < first.getX() ? -x : x),
|
||||
first.getY() + (second.getY() < first.getY() ? -y : y)), 1);
|
||||
}
|
||||
|
||||
/**
|
||||
* @return the side panels of the exploded view, folded out from the edges of the top panel:
|
||||
* front, back and then, when all sides are shown, left and right. Empty when no sides are
|
||||
* shown or the enclosure has no height.
|
||||
*/
|
||||
Rectangle2D[] getSidePanels() {
|
||||
double h = getHeight() == null ? 0 : getHeight().convertToPixels();
|
||||
if (h <= 0 || getSides() == Sides.NONE) {
|
||||
return new Rectangle2D[0];
|
||||
}
|
||||
double s = getSpacing() == null ? 0 : getSpacing().convertToPixels();
|
||||
double x = firstPoint.getX();
|
||||
double y = firstPoint.getY();
|
||||
double w = secondPoint.getX() - x;
|
||||
double d = secondPoint.getY() - y;
|
||||
Rectangle2D front = new Rectangle2D.Double(x, y - s - h, w, h);
|
||||
Rectangle2D back = new Rectangle2D.Double(x, y + d + s, w, h);
|
||||
if (getSides() == Sides.FRONT_AND_BACK) {
|
||||
return new Rectangle2D[] {front, back};
|
||||
}
|
||||
return new Rectangle2D[] {front, back, new Rectangle2D.Double(x - s - h, y, h, d),
|
||||
new Rectangle2D.Double(x + w + s, y, h, d)};
|
||||
}
|
||||
|
||||
@Override
|
||||
@@ -61,6 +125,7 @@ public class ChassisPanel extends AbstractShape {
|
||||
IDrawingObserver drawingObserver) {
|
||||
g2d.setStroke(ObjectCache.getInstance().fetchBasicStroke((int) borderThickness.convertToPixels()));
|
||||
int radius = (int) edgeRadius.convertToPixels();
|
||||
Rectangle2D[] sidePanels = getSidePanels();
|
||||
if (componentState != ComponentState.DRAGGING) {
|
||||
Composite oldComposite = applyAlpha(g2d, componentState);
|
||||
g2d.setColor(color);
|
||||
@@ -73,6 +138,9 @@ public class ChassisPanel extends AbstractShape {
|
||||
(int) (secondPoint.getX() - firstPoint.getX()),
|
||||
(int) (secondPoint.getY() - firstPoint.getY()), radius, radius);
|
||||
}
|
||||
for (Rectangle2D panel : sidePanels) {
|
||||
g2d.fill(panel);
|
||||
}
|
||||
g2d.setComposite(oldComposite);
|
||||
drawingObserver.stopTracking();
|
||||
}
|
||||
@@ -89,6 +157,9 @@ public class ChassisPanel extends AbstractShape {
|
||||
(int) (secondPoint.getX() - firstPoint.getX()),
|
||||
(int) (secondPoint.getY() - firstPoint.getY()), radius, radius);
|
||||
}
|
||||
for (Rectangle2D panel : sidePanels) {
|
||||
g2d.draw(panel);
|
||||
}
|
||||
}
|
||||
|
||||
@EditableProperty(name = "Radius")
|
||||
@@ -100,12 +171,84 @@ public class ChassisPanel extends AbstractShape {
|
||||
this.edgeRadius = edgeRadius;
|
||||
}
|
||||
|
||||
@EditableProperty(name = "Value")
|
||||
public String getModel() {
|
||||
return value;
|
||||
}
|
||||
|
||||
public void setModel(String model) {
|
||||
this.value = model;
|
||||
}
|
||||
|
||||
@EditableProperty
|
||||
public Size getHeight() {
|
||||
return height;
|
||||
}
|
||||
|
||||
public void setHeight(Size height) {
|
||||
this.height = height;
|
||||
}
|
||||
|
||||
@EditableProperty
|
||||
public Sides getSides() {
|
||||
if (sides == null) {
|
||||
sides = Sides.ALL;
|
||||
}
|
||||
return sides;
|
||||
}
|
||||
|
||||
public void setSides(Sides sides) {
|
||||
this.sides = sides;
|
||||
}
|
||||
|
||||
@EditableProperty
|
||||
public Size getSpacing() {
|
||||
if (spacing == null) {
|
||||
spacing = DEFAULT_SPACING;
|
||||
}
|
||||
return spacing;
|
||||
}
|
||||
|
||||
public void setSpacing(Size spacing) {
|
||||
this.spacing = spacing;
|
||||
}
|
||||
|
||||
@Override
|
||||
public String getValueForDisplay() {
|
||||
return value == null ? "" : value;
|
||||
}
|
||||
|
||||
@Override
|
||||
public void drawIcon(Graphics2D g2d, int width, int height) {
|
||||
int factor = 32 / width;
|
||||
g2d.setColor(LIGHT_METAL_COLOR);
|
||||
g2d.fillRect(2 / factor, 4 / factor, width - 4 / factor, height - 8 / factor);
|
||||
g2d.setColor(LIGHT_METAL_COLOR.darker());
|
||||
g2d.drawRect(2 / factor, 4 / factor, width - 4 / factor, height - 8 / factor);
|
||||
int flap = 6 / factor;
|
||||
int left = 2 / factor + flap;
|
||||
int top = 2 / factor + flap;
|
||||
int topWidth = width - 2 * left;
|
||||
int topHeight = height - 2 * top;
|
||||
int[][] panels = {{left, top, topWidth, topHeight}, {left, top - flap, topWidth, flap},
|
||||
{left, top + topHeight, topWidth, flap}, {left - flap, top, flap, topHeight},
|
||||
{left + topWidth, top, flap, topHeight}};
|
||||
for (int[] panel : panels) {
|
||||
g2d.setColor(LIGHT_METAL_COLOR);
|
||||
g2d.fillRect(panel[0], panel[1], panel[2], panel[3]);
|
||||
g2d.setColor(LIGHT_METAL_COLOR.darker());
|
||||
g2d.drawRect(panel[0], panel[1], panel[2], panel[3]);
|
||||
}
|
||||
}
|
||||
|
||||
public enum Sides {
|
||||
ALL("All"), FRONT_AND_BACK("Front and Back"), NONE("None");
|
||||
|
||||
private final String label;
|
||||
|
||||
Sides(String label) {
|
||||
this.label = label;
|
||||
}
|
||||
|
||||
@Override
|
||||
public String toString() {
|
||||
return label;
|
||||
}
|
||||
}
|
||||
}
|
||||
|
||||
@@ -42,7 +42,7 @@ import org.diylc.core.annotations.EditableProperty;
|
||||
import org.diylc.core.measures.Size;
|
||||
import org.diylc.core.measures.SizeUnit;
|
||||
|
||||
@ComponentDescriptor(name = "Dial Scale", author = "Branislav Stojkovic", category = "Misc",
|
||||
@ComponentDescriptor(name = "Dial Scale", author = "Branislav Stojkovic", category = "Hardware",
|
||||
instanceNamePrefix = "DS", description = "Control panel dial scale", zOrder = IDIYComponent.CHASSIS + 0.1,
|
||||
bomPolicy = BomPolicy.NEVER_SHOW, autoEdit = false, transformer = SimpleComponentTransformer.class)
|
||||
public class DialScale extends AbstractComponent<String> {
|
||||
|
||||
+1
-1
@@ -31,7 +31,7 @@ import org.diylc.core.Project;
|
||||
import org.diylc.core.annotations.BomPolicy;
|
||||
import org.diylc.core.annotations.ComponentDescriptor;
|
||||
|
||||
@ComponentDescriptor(name = "Elliptical Cutout", author = "Branislav Stojkovic", category = "Electro-Mechanical",
|
||||
@ComponentDescriptor(name = "Elliptical Cutout", author = "Branislav Stojkovic", category = "Hardware",
|
||||
instanceNamePrefix = "ELC", description = "Elliptical chassis cutout", zOrder = IDIYComponent.CHASSIS + 0.1,
|
||||
bomPolicy = BomPolicy.NEVER_SHOW, autoEdit = false, transformer = SimpleComponentTransformer.class)
|
||||
public class EllipticalCutout extends AbstractShape {
|
||||
|
||||
@@ -35,7 +35,7 @@ import org.diylc.core.annotations.BomPolicy;
|
||||
import org.diylc.core.annotations.ComponentDescriptor;
|
||||
import org.diylc.core.annotations.EditableProperty;
|
||||
|
||||
@ComponentDescriptor(name = "Polygonal Cutout", author = "Branislav Stojkovic", category = "Electro-Mechanical",
|
||||
@ComponentDescriptor(name = "Polygonal Cutout", author = "Branislav Stojkovic", category = "Hardware",
|
||||
instanceNamePrefix = "POLYC", description = "Polygonal chassis cutout", zOrder = IDIYComponent.CHASSIS + 0.1,
|
||||
bomPolicy = BomPolicy.NEVER_SHOW, autoEdit = false, transformer = SimpleComponentTransformer.class)
|
||||
public class PolygonalCutout extends AbstractShape {
|
||||
|
||||
+1
-1
@@ -34,7 +34,7 @@ import org.diylc.core.annotations.EditableProperty;
|
||||
import org.diylc.core.measures.Size;
|
||||
import org.diylc.core.measures.SizeUnit;
|
||||
|
||||
@ComponentDescriptor(name = "Rectangular Cutout", author = "Branislav Stojkovic", category = "Electro-Mechanical",
|
||||
@ComponentDescriptor(name = "Rectangular Cutout", author = "Branislav Stojkovic", category = "Hardware",
|
||||
instanceNamePrefix = "RECTC", description = "Rectangular chassis cutout, with or without rounded edges",
|
||||
zOrder = IDIYComponent.CHASSIS + 0.1, bomPolicy = BomPolicy.NEVER_SHOW, autoEdit = false,
|
||||
transformer = SimpleComponentTransformer.class)
|
||||
|
||||
+1
-1
@@ -43,7 +43,7 @@ import org.diylc.core.gerber.IGerberDrawingObserver;
|
||||
import org.diylc.core.measures.Size;
|
||||
import org.diylc.core.measures.SizeUnit;
|
||||
|
||||
@ComponentDescriptor(name = "Drill Hole", category = "Electro-Mechanical", author = "Branislav Stojkovic",
|
||||
@ComponentDescriptor(name = "Drill Hole", category = "Hardware", author = "Branislav Stojkovic",
|
||||
description = "Drill hole marker for PCB, chassis or faceplate", instanceNamePrefix = "Hole",
|
||||
zOrder = IDIYComponent.BOARD + 0.1, bomPolicy = BomPolicy.NEVER_SHOW,
|
||||
keywordPolicy = KeywordPolicy.SHOW_TAG, keywordTag = "PCB",
|
||||
|
||||
@@ -0,0 +1,132 @@
|
||||
Diecast (1590),1590LLB,50.5 mm,50.5 mm,21 mm
|
||||
Diecast (1590),1590LB,50.6 mm,50.55 mm,27 mm
|
||||
Diecast (1590),1590H,38 mm,53 mm,27 mm
|
||||
Diecast (1590),1590Y,92 mm,92 mm,38 mm
|
||||
Diecast (1590),1590A,38.5 mm,92.6 mm,27 mm
|
||||
Diecast (1590),1590G,50 mm,100 mm,21.5 mm
|
||||
Diecast (1590),1590G2,50 mm,100 mm,27 mm
|
||||
Diecast (1590),1590S,82.4 mm,110.5 mm,40 mm
|
||||
Diecast (1590),1590B,60.5 mm,112.4 mm,27 mm
|
||||
Diecast (1590),1590B2,60.5 mm,112.4 mm,33.5 mm
|
||||
Diecast (1590),1590BS,60.5 mm,112 mm,38 mm
|
||||
Diecast (1590),1590B3,77 mm,116 mm,33.5 mm
|
||||
Diecast (1590),1590BB,94 mm,119.5 mm,30 mm
|
||||
Diecast (1590),1590BB2,94 mm,119.5 mm,33.75 mm
|
||||
Diecast (1590),1590BBS,94 mm,119.5 mm,38.1 mm
|
||||
Diecast (1590),1590Q,120 mm,120 mm,30 mm
|
||||
Diecast (1590),1590U,120 mm,120 mm,55 mm
|
||||
Diecast (1590),1590V,120 mm,120 mm,90 mm
|
||||
Diecast (1590),1590C,94 mm,119.5 mm,52.5 mm
|
||||
Diecast (1590),1590T,80 mm,120 mm,55 mm
|
||||
Diecast (1590),1590CE,100 mm,120 mm,61 mm
|
||||
Diecast (1590),1590N1,65.5 mm,121.2 mm,35.8 mm
|
||||
Diecast (1590),1590KK,125 mm,125 mm,53 mm
|
||||
Diecast (1590),1590K,125 mm,125 mm,75 mm
|
||||
Diecast (1590),1590J,145 mm,95 mm,45.1 mm
|
||||
Diecast (1590),1590XX,145.2 mm,121.2 mm,35.2 mm
|
||||
Diecast (1590),1590X,145.2 mm,121.2 mm,52.3 mm
|
||||
Diecast (1590),1590P1,153 mm,83.1 mm,46.4 mm
|
||||
Diecast (1590),1590D,187.75 mm,119.5 mm,52 mm
|
||||
Diecast (1590),1590DD,188 mm,120 mm,33 mm
|
||||
Diecast (1590),1590E,188 mm,120 mm,78 mm
|
||||
Diecast (1590),1590F,188 mm,188 mm,63 mm
|
||||
Diecast (1590),1590R1,192 mm,112 mm,57 mm
|
||||
Diecast (1590),1590DE,200 mm,120 mm,60 mm
|
||||
Diecast (1590),1590EE,200 mm,120 mm,81 mm
|
||||
Diecast (1590),1590BX2,254 mm,70 mm,31 mm
|
||||
Diecast (1590),1590BX,254 mm,70 mm,46 mm
|
||||
Diecast (1550),1550Q,55 mm,60 mm,26 mm
|
||||
Diecast (1550),1550P,55 mm,80 mm,21 mm
|
||||
Diecast (1550),1550A,35 mm,89 mm,26 mm
|
||||
Diecast (1550),1550B,64 mm,114.5 mm,26 mm
|
||||
Diecast (1550),1550D,64 mm,115 mm,51 mm
|
||||
Diecast (1550),1550C,90 mm,115 mm,51 mm
|
||||
Diecast (1550),1550M,100 mm,120 mm,31 mm
|
||||
Diecast (1550),1550K,140 mm,102 mm,73 mm
|
||||
Diecast (1550),1550L,165 mm,127 mm,73 mm
|
||||
Diecast (1550),1550E,171 mm,121 mm,51 mm
|
||||
Diecast (1550),1550F,171 mm,121 mm,101 mm
|
||||
Diecast (1550),1550G,222 mm,146 mm,51 mm
|
||||
Diecast (1550),1550H,222 mm,146 mm,101 mm
|
||||
Diecast (1550),1550N,250 mm,250 mm,97 mm
|
||||
Diecast (1550),1550J,275 mm,175 mm,63 mm
|
||||
Others,125B,66 mm,122 mm,36 mm
|
||||
Chassis - Steel (1441),1441-9,8 in,4 in,1 in
|
||||
Chassis - Steel (1441),1441-15,10 in,6 in,1 in
|
||||
Chassis - Steel (1441),1441-6,4 in,4 in,2 in
|
||||
Chassis - Steel (1441),1441-8,6 in,4 in,2 in
|
||||
Chassis - Steel (1441),1441-12,7 in,5 in,2 in
|
||||
Chassis - Steel (1441),1441-10,8 in,4 in,2 in
|
||||
Chassis - Steel (1441),1441-14,9 in,5 in,2 in
|
||||
Chassis - Steel (1441),1441-16,10 in,6 in,2 in
|
||||
Chassis - Steel (1441),1441-22,12 in,8 in,2 in
|
||||
Chassis - Steel (1441),1441-29,12 in,10 in,2 in
|
||||
Chassis - Steel (1441),1441-18,13.5 in,5 in,2 in
|
||||
Chassis - Steel (1441),1441-26,16 in,8 in,2 in
|
||||
Chassis - Steel (1441),1441-30,17 in,10 in,2 in
|
||||
Chassis - Steel (1441),1441-34,17 in,12 in,2 in
|
||||
Chassis - Steel (1441),1441-24,12 in,8 in,3 in
|
||||
Chassis - Steel (1441),1441-28,16 in,8 in,3 in
|
||||
Chassis - Steel (1441),1441-20,17 in,4 in,3 in
|
||||
Chassis - Steel (1441),1441-32,17 in,10 in,3 in
|
||||
Chassis - Steel (1441),1441-36,17 in,12 in,3 in
|
||||
Chassis - Steel (1441),1441-38,17 in,14 in,3 in
|
||||
Chassis - Steel (1441),1441-33,17 in,10 in,4 in
|
||||
Chassis - Steel (1441),1441-40,17 in,14 in,4 in
|
||||
Chassis - Steel (1441),1441-42,17 in,14 in,5 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-45351,4.5 in,3.5 in,1 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-9,8 in,4 in,1 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-15,10 in,6 in,1 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-6415,6 in,4 in,1.5 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-84515,8 in,4.5 in,1.5 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-6,4 in,4 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-542,5 in,4 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-8,6 in,4 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-12,7 in,5 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-772,7 in,7 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-10,8 in,4 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-862,8 in,6 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-14,9 in,5 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-972,9 in,7 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-9552,9.5 in,5 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-16,10 in,6 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-1172,11 in,7 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-22,12 in,8 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-29,12 in,10 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-1372,13 in,7 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-18,13.5 in,5 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-26,16 in,8 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-30,17 in,10 in,2 in
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-17132,17 in,13 in,2 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-95525,9.5 in,5 in,2.5 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-10825,10 in,8 in,2.5 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-12825,12 in,8 in,2.5 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-643,6 in,4 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-753,7 in,5 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-9553,9.5 in,5 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1053,10 in,5 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1273,12 in,7 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-24,12 in,8 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-12103,12 in,10 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-12123,12 in,12 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1463,14 in,6 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-14103,14 in,10 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1573,15 in,7 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1593,15 in,9 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-28,16 in,8 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-20,17 in,4 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1763,17 in,6 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1773,17 in,7 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1783,17 in,8 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-32,17 in,10 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17123,17 in,12 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17133,17 in,13 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17143,17 in,14 in,3 in
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17173,17 in,17 in,3 in
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-33,17 in,10 in,4 in
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17134,17 in,13 in,4 in
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17154,17 in,15 in,4 in
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17174,17 in,17 in,4 in
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17105,17 in,10 in,5 in
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17135,17 in,13 in,5 in
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17156,17 in,15 in,6 in
|
||||
+241
@@ -0,0 +1,241 @@
|
||||
/*
|
||||
|
||||
DIY Layout Creator (DIYLC).
|
||||
Copyright (c) 2009-2025 held jointly by the individual authors.
|
||||
|
||||
This file is part of DIYLC.
|
||||
|
||||
DIYLC is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 3 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
DIYLC is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with DIYLC. If not, see <http://www.gnu.org/licenses/>.
|
||||
|
||||
*/
|
||||
package org.diylc.components.chassis;
|
||||
|
||||
import java.awt.geom.Point2D;
|
||||
import java.awt.geom.Rectangle2D;
|
||||
import java.util.ArrayList;
|
||||
import java.util.List;
|
||||
|
||||
import org.diylc.components.chassis.ChassisPanel.Sides;
|
||||
import org.diylc.core.IDIYComponent;
|
||||
import org.diylc.core.measures.Size;
|
||||
import org.diylc.core.measures.SizeUnit;
|
||||
import org.diylc.presenter.DatasheetService;
|
||||
import org.diylc.serialization.ProjectFileManager;
|
||||
import org.diylc.utils.BomEntry;
|
||||
import org.diylc.utils.BomMaker;
|
||||
import org.junit.Assert;
|
||||
import org.junit.Test;
|
||||
|
||||
public class ChassisPanelDatasheetTest {
|
||||
|
||||
private static final double TOLERANCE = 1e-6;
|
||||
|
||||
private static String[] row(String model) {
|
||||
return DatasheetService.getInstance().loadDatasheet(ChassisPanel.class).stream()
|
||||
.filter(row -> row[1].equals(model)).findFirst().get();
|
||||
}
|
||||
|
||||
private static double mm(double value) {
|
||||
return new Size(value, SizeUnit.mm).convertToPixels();
|
||||
}
|
||||
|
||||
private static void assertRect(Rectangle2D expected, Rectangle2D actual) {
|
||||
Assert.assertEquals(expected.getX(), actual.getX(), TOLERANCE);
|
||||
Assert.assertEquals(expected.getY(), actual.getY(), TOLERANCE);
|
||||
Assert.assertEquals(expected.getWidth(), actual.getWidth(), TOLERANCE);
|
||||
Assert.assertEquals(expected.getHeight(), actual.getHeight(), TOLERANCE);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void everyRowApplies() {
|
||||
List<String[]> datasheet = DatasheetService.getInstance().loadDatasheet(ChassisPanel.class);
|
||||
Assert.assertNotNull(datasheet);
|
||||
Assert.assertFalse(datasheet.isEmpty());
|
||||
for (String[] row : datasheet) {
|
||||
Assert.assertEquals(String.join(",", row), 5, row.length);
|
||||
ChassisPanel enclosure = new ChassisPanel(row);
|
||||
Assert.assertEquals(row[1], enclosure.getModel());
|
||||
Assert.assertEquals(row[1], Size.parseSize(row[4]), enclosure.getHeight());
|
||||
Point2D first = enclosure.getControlPoint(0);
|
||||
Point2D second = enclosure.getControlPoint(1);
|
||||
Assert.assertEquals(row[1], Size.parseSize(row[2]).convertToPixels(),
|
||||
second.getX() - first.getX(), TOLERANCE);
|
||||
Assert.assertEquals(row[1], Size.parseSize(row[3]).convertToPixels(),
|
||||
second.getY() - first.getY(), TOLERANCE);
|
||||
}
|
||||
}
|
||||
|
||||
@Test
|
||||
public void aNewEnclosureIsA125BWithAllSides() {
|
||||
ChassisPanel enclosure = new ChassisPanel();
|
||||
ChassisPanel fromDatasheet = new ChassisPanel(row("125B"));
|
||||
|
||||
Assert.assertEquals(fromDatasheet.getModel(), enclosure.getModel());
|
||||
Assert.assertEquals(fromDatasheet.getHeight(), enclosure.getHeight());
|
||||
Assert.assertEquals(fromDatasheet.getEdgeRadius(), enclosure.getEdgeRadius());
|
||||
Assert.assertEquals(fromDatasheet.getControlPoint(1), enclosure.getControlPoint(1));
|
||||
Assert.assertEquals(Sides.ALL, enclosure.getSides());
|
||||
Assert.assertEquals(4, enclosure.getSidePanels().length);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void pedalSizedBoxesAreUprightAndBiggerOnesHorizontal() {
|
||||
for (String model : new String[] {"125B", "1590A", "1590B", "1590BB", "1550B"}) {
|
||||
Point2D second = new ChassisPanel(row(model)).getControlPoint(1);
|
||||
Assert.assertTrue(model, second.getY() > second.getX());
|
||||
}
|
||||
for (String model : new String[] {"1590XX", "1590DD", "1441-10", "1444-32"}) {
|
||||
Point2D second = new ChassisPanel(row(model)).getControlPoint(1);
|
||||
Assert.assertTrue(model, second.getX() > second.getY());
|
||||
}
|
||||
}
|
||||
|
||||
@Test
|
||||
public void modelNamesAreUnique() {
|
||||
List<String[]> datasheet = DatasheetService.getInstance().loadDatasheet(ChassisPanel.class);
|
||||
Assert.assertEquals(datasheet.size(),
|
||||
datasheet.stream().map(row -> row[1]).distinct().count());
|
||||
}
|
||||
|
||||
@Test
|
||||
public void modelLeavesTheRadiusAlone() {
|
||||
ChassisPanel enclosure = new ChassisPanel();
|
||||
enclosure.setEdgeRadius(new Size(3d, SizeUnit.mm));
|
||||
|
||||
enclosure.applyModel(row("1590BB"));
|
||||
|
||||
Assert.assertEquals(new Size(3d, SizeUnit.mm), enclosure.getEdgeRadius());
|
||||
}
|
||||
|
||||
@Test
|
||||
public void inchRowsKeepTheirUnit() {
|
||||
ChassisPanel enclosure = new ChassisPanel(row("1444-32"));
|
||||
Assert.assertEquals(new Size(3d, SizeUnit.in), enclosure.getHeight());
|
||||
Point2D first = enclosure.getControlPoint(0);
|
||||
Point2D second = enclosure.getControlPoint(1);
|
||||
Assert.assertEquals(new Size(17d, SizeUnit.in).convertToPixels(),
|
||||
second.getX() - first.getX(), TOLERANCE);
|
||||
Assert.assertEquals(new Size(10d, SizeUnit.in).convertToPixels(),
|
||||
second.getY() - first.getY(), TOLERANCE);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void sidesUnfoldAroundTheTopPanel() {
|
||||
ChassisPanel enclosure = new ChassisPanel(row("1590BB"));
|
||||
|
||||
Rectangle2D[] panels = enclosure.getSidePanels();
|
||||
|
||||
Assert.assertEquals(4, panels.length);
|
||||
assertRect(new Rectangle2D.Double(0, -mm(30), mm(94), mm(30)), panels[0]);
|
||||
assertRect(new Rectangle2D.Double(0, mm(119.5), mm(94), mm(30)), panels[1]);
|
||||
assertRect(new Rectangle2D.Double(-mm(30), 0, mm(30), mm(119.5)), panels[2]);
|
||||
assertRect(new Rectangle2D.Double(mm(94), 0, mm(30), mm(119.5)), panels[3]);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void spacingSetsTheSidesApart() {
|
||||
ChassisPanel enclosure = new ChassisPanel(row("1590BB"));
|
||||
enclosure.setSpacing(new Size(2d, SizeUnit.mm));
|
||||
|
||||
Rectangle2D[] panels = enclosure.getSidePanels();
|
||||
|
||||
assertRect(new Rectangle2D.Double(0, -mm(32), mm(94), mm(30)), panels[0]);
|
||||
assertRect(new Rectangle2D.Double(0, mm(121.5), mm(94), mm(30)), panels[1]);
|
||||
assertRect(new Rectangle2D.Double(-mm(32), 0, mm(30), mm(119.5)), panels[2]);
|
||||
assertRect(new Rectangle2D.Double(mm(96), 0, mm(30), mm(119.5)), panels[3]);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void frontAndBackOnly() {
|
||||
ChassisPanel enclosure = new ChassisPanel(row("1590BB"));
|
||||
enclosure.setSides(Sides.FRONT_AND_BACK);
|
||||
|
||||
Rectangle2D[] panels = enclosure.getSidePanels();
|
||||
|
||||
Assert.assertEquals(2, panels.length);
|
||||
assertRect(new Rectangle2D.Double(0, -mm(30), mm(94), mm(30)), panels[0]);
|
||||
assertRect(new Rectangle2D.Double(0, mm(119.5), mm(94), mm(30)), panels[1]);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void noSidesKeepsTheModelButDrawsOnePanel() {
|
||||
ChassisPanel enclosure = new ChassisPanel(row("1590BB"));
|
||||
enclosure.setSides(Sides.NONE);
|
||||
|
||||
Assert.assertEquals(0, enclosure.getSidePanels().length);
|
||||
Assert.assertEquals(new Size(30d, SizeUnit.mm), enclosure.getHeight());
|
||||
}
|
||||
|
||||
@Test
|
||||
public void sidesFollowTheTopPanelWhenItIsStretched() {
|
||||
ChassisPanel enclosure = new ChassisPanel(row("1590BB"));
|
||||
enclosure.setControlPoint(new Point2D.Double(mm(200), mm(100)), 1);
|
||||
|
||||
Rectangle2D[] panels = enclosure.getSidePanels();
|
||||
|
||||
assertRect(new Rectangle2D.Double(0, mm(100), mm(200), mm(30)), panels[1]);
|
||||
assertRect(new Rectangle2D.Double(mm(200), 0, mm(30), mm(100)), panels[3]);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void withoutHeightItIsASinglePanel() {
|
||||
ChassisPanel enclosure = new ChassisPanel();
|
||||
enclosure.setHeight(new Size(0d, SizeUnit.mm));
|
||||
Assert.assertEquals(0, enclosure.getSidePanels().length);
|
||||
|
||||
enclosure.setHeight(null);
|
||||
Assert.assertEquals(0, enclosure.getSidePanels().length);
|
||||
}
|
||||
|
||||
@Test
|
||||
public void panelFromAnOldFileIsASinglePanel() {
|
||||
// a panel from before the datasheet: no model, a radius of 0 and a free-form size
|
||||
ChassisPanel original = new ChassisPanel();
|
||||
original.setModel("");
|
||||
original.setEdgeRadius(new Size(0d, SizeUnit.mm));
|
||||
original.setControlPoint(new Point2D.Double(20, 30), 1);
|
||||
String xml = ProjectFileManager.xStreamSerializer.toXML(original)
|
||||
.replaceAll("\\s*<height[^>]*/>", "").replaceAll("\\s*<height>.*?</height>", "")
|
||||
.replaceAll("\\s*<sides>[^<]*</sides>", "")
|
||||
.replaceAll("\\s*<spacing[^>]*/>", "").replaceAll("\\s*<spacing>.*?</spacing>", "");
|
||||
Assert.assertFalse(xml, xml.contains("<height"));
|
||||
Assert.assertFalse(xml, xml.contains("<sides>"));
|
||||
Assert.assertFalse(xml, xml.contains("<spacing"));
|
||||
|
||||
ChassisPanel reloaded = (ChassisPanel) ProjectFileManager.xStreamSerializer.fromXML(xml);
|
||||
|
||||
Assert.assertNull(reloaded.getHeight());
|
||||
Assert.assertEquals(Sides.ALL, reloaded.getSides());
|
||||
Assert.assertEquals(new Size(0d, SizeUnit.mm), reloaded.getSpacing());
|
||||
Assert.assertEquals(0, reloaded.getSidePanels().length);
|
||||
Assert.assertEquals("", reloaded.getValueForDisplay());
|
||||
Assert.assertEquals(new Size(0d, SizeUnit.mm), reloaded.getEdgeRadius());
|
||||
Assert.assertEquals(new Point2D.Double(20, 30), reloaded.getControlPoint(1));
|
||||
}
|
||||
|
||||
@Test
|
||||
public void bomListsEnclosuresByModel() {
|
||||
List<IDIYComponent<?>> components = new ArrayList<IDIYComponent<?>>();
|
||||
components.add(new ChassisPanel(row("1590BB")));
|
||||
components.add(new ChassisPanel(row("1590BB")));
|
||||
components.add(new ChassisPanel(row("1590B")));
|
||||
|
||||
List<BomEntry> bom = BomMaker.getInstance().createBom(components);
|
||||
|
||||
Assert.assertEquals(2, bom.size());
|
||||
BomEntry bb = bom.stream().filter(e -> "1590BB".equals(e.getValue())).findFirst().get();
|
||||
Assert.assertEquals("Enclosure", bb.getType());
|
||||
Assert.assertEquals(Integer.valueOf(2), bb.getQuantity());
|
||||
}
|
||||
}
|
||||
@@ -716,3 +716,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|Pinnamen
|
||||
Pin Labels|Pin-Beschriftungen
|
||||
Names|Namen
|
||||
Hardware|Hardware
|
||||
Sides|Seiten
|
||||
All|Alle
|
||||
Front and Back|Vorne und hinten
|
||||
|
||||
@@ -709,3 +709,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names
|
||||
Pin Labels
|
||||
Names
|
||||
Hardware
|
||||
Sides
|
||||
All
|
||||
Front and Back
|
||||
|
||||
@@ -712,3 +712,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|Nombres de Pines
|
||||
Pin Labels|Etiquetas de Pines
|
||||
Names|Nombres
|
||||
Hardware|Herrajes
|
||||
Sides|Lados
|
||||
All|Todos
|
||||
Front and Back|Frente y parte trasera
|
||||
|
||||
@@ -711,3 +711,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|Noms des broches
|
||||
Pin Labels|Étiquettes des broches
|
||||
Names|Noms
|
||||
Hardware|Quincaillerie
|
||||
Sides|Côtés
|
||||
All|Tous
|
||||
Front and Back|Avant et arrière
|
||||
|
||||
@@ -713,3 +713,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|Nomi dei Pin
|
||||
Pin Labels|Etichette dei Pin
|
||||
Names|Nomi
|
||||
Hardware|Minuteria
|
||||
Sides|Lati
|
||||
All|Tutti
|
||||
Front and Back|Fronte e retro
|
||||
|
||||
@@ -717,3 +717,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|Pinnamen
|
||||
Pin Labels|Pinlabels
|
||||
Names|Namen
|
||||
Hardware|Hardware
|
||||
Sides|Zijden
|
||||
All|Alle
|
||||
Front and Back|Voor- en achterkant
|
||||
|
||||
@@ -712,3 +712,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|Nomes dos Pinos
|
||||
Pin Labels|Rótulos dos Pinos
|
||||
Names|Nomes
|
||||
Hardware|Ferragens
|
||||
Sides|Lados
|
||||
All|Todos
|
||||
Front and Back|Frente e traseira
|
||||
|
||||
@@ -708,3 +708,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|Nazivi Pinova
|
||||
Pin Labels|Oznake Pinova
|
||||
Names|Nazivi
|
||||
Hardware|Mehanički delovi
|
||||
Sides|Strane
|
||||
All|Sve
|
||||
Front and Back|Prednja i zadnja
|
||||
|
||||
@@ -710,3 +710,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|पिन नाम
|
||||
Pin Labels|पिन लेबल
|
||||
Names|नाम
|
||||
Hardware|हार्डवेयर
|
||||
Sides|भुजाएं
|
||||
All|सभी
|
||||
Front and Back|आगे और पीछे
|
||||
|
||||
@@ -710,3 +710,7 @@ AI Circuit Analyzer requires a DIYLC Cloud account. Would you like to log in now
|
||||
Pin Names|引脚名称
|
||||
Pin Labels|引脚标签
|
||||
Names|名称
|
||||
Hardware|五金件
|
||||
Sides|侧面
|
||||
All|全部
|
||||
Front and Back|前后
|
||||
|
||||
@@ -1,274 +1,98 @@
|
||||
# Chassis and Enclosures
|
||||
|
||||
Covering the Hammond pedal and amplifier chassis lineup with a `ChassisPanel` datasheet, and
|
||||
shipping the common pedal enclosures as exploded five-panel factory building blocks.
|
||||
The Hammond die-cast and amplifier chassis lineup as a datasheet on a single `Enclosure`
|
||||
component that draws either one panel or an exploded view of the whole box.
|
||||
|
||||
## 1. Current state
|
||||
|
||||
- `ChassisPanel` (`diylc-library`, `org.diylc.components.chassis`) is a two-point
|
||||
`AbstractShape` on the `CHASSIS` layer with an `Edge Radius`. One instance is one side of a
|
||||
chassis; its `@AiNote` already fixes the exploded-view convention (top in the centre, front
|
||||
against its upper edge, back against its lower edge, left and right against the side edges).
|
||||
- Four factory variants in `variants.xml` (`125B`, `A`, `B`, `BB`) store nothing but corner points
|
||||
and a 5 mm radius. Their sizes are not Hammond's (the `125B` variant is 122.3 x 67.1 mm, the
|
||||
1590N1 drawing says 121.2 x 65.5).
|
||||
- Factory building blocks (`import-defaults/blocks.xml`, three entries) are imported once, behind
|
||||
the boolean `DEFAULT_BLOCKS_IMPORTED_KEY`; blocks added later never reach existing users.
|
||||
- `ChassisPanel` (`diylc-library`, `org.diylc.components.chassis`) is shown as **Enclosure** in the
|
||||
new **Hardware** category, with instance prefix `ENC`. The class name is unchanged, so files,
|
||||
favourites, recent components and variants, all keyed by class, are unaffected. The three
|
||||
cutouts, Drill Hole and Dial Scale moved to Hardware with it.
|
||||
- It is a two-point `AbstractShape` on the `CHASSIS` layer. The control points are the top panel.
|
||||
With `Height` > 0 the sides are unfolded around it (front above, back below, left and right to
|
||||
the sides; never the bottom), per `Sides`: `All`, `Front and Back` or `None`, set `Spacing`
|
||||
(default 0, edge to edge) apart from the top.
|
||||
- A new enclosure is an upright 125B with all sides, square corners and no spacing (`DEFAULT_*`
|
||||
constants; the size matches its datasheet row).
|
||||
Old files are unaffected: XStream runs no constructor or initializer, so their saved size,
|
||||
radius and empty value stay and their missing `height` keeps them a single panel. `Height` null
|
||||
(old files) or 0, or `Sides = None`, draws a single panel, as `ChassisPanel` always did.
|
||||
- A datasheet of 132 Hammond and generic models (§4) sets `Value` (the model), the top panel size
|
||||
and `Height`; it leaves `Radius` alone. One component is one enclosure, so the BOM lists `Enclosure / 1590BB`.
|
||||
- The four old factory variants (`125B`, `A`, `B`, `BB`) are withdrawn as `deletedOn` stubs.
|
||||
- Composites take the lowest layer of their children (`ComponentProcessor.getZOrder`), so a
|
||||
composite of chassis panels sits on the Chassis layer, under parts placed before it, and
|
||||
follows that layer's hide/lock. Done; see §3.1.
|
||||
building block made of chassis parts sits on the Chassis layer and hides and locks with it.
|
||||
|
||||
## 2. Design decisions
|
||||
|
||||
| # | Decision | Rationale |
|
||||
|---|---|---|
|
||||
| D1 | Chassis sizes move to a datasheet, `datasheets/ChassisPanel.datasheet`, two creation steps (Group > Model) | Same mechanism as `DIL_IC` and `Resistor`; the AI can name a model; one row serves every side of the enclosure (D3). |
|
||||
| D2 | Row format `Group,Model,Length,Width,Height,Radius`. Sizes in mm unless a unit follows (`8 in`), parsed like `Resistor.parseDatasheetSize` | Pedal drawings are metric, Hammond chassis are nominal inches; writing each in its native unit keeps the file checkable against the drawings. |
|
||||
| D3 | `ChassisPanel` gets a `Value` property holding the model, and a new `Side` (`TOP`, `FRONT`, `BACK`, `LEFT`, `RIGHT`). `applyModel` sets `Value` to the model and sizes the panel from the row according to its side: top = Length x Width, front/back = Length x Height, left/right = Width x Height, keeping the first control point. Changing `Side` on a panel that has a model resizes it | One class, no per-side types. `Value` is backed by `AbstractShape.value`, a `String` that every shape already serializes and nothing reads (always `""`), so no new field is needed for it; since `AbstractShape.getValue()` is typed `Void`, the getter is `getModel()` with `@EditableProperty(name = "Value")`. `side` is new and reads `null` from old files: `getSide()` defaults to `TOP`. An empty value means "free-form panel" exactly as today. |
|
||||
| D4 | Top panel is drawn landscape, Length along X | Matches the four existing variants and the amp chassis front-panel orientation; pedal builders rotate (the transformer already supports it, and a composite rotates as a unit). |
|
||||
| D5 | Length/Width are Hammond's outside dimensions; Height is the drillable wall: box height without the lid for die-cast boxes, outside height for 1441/1444 | The lid of a 1590 is the pedal's bottom, which the exploded view leaves out. |
|
||||
| D6 | Die-cast taper is ignored: the top panel uses the outer size at the lid opening and side panels are rectangles | Hammond does not publish the floor size; the walls slope at most 2 deg, so the floor is 0.7-1.9 mm smaller per side. Recorded in §5 as unsourced. |
|
||||
| D7 | The four variants are withdrawn as `deletedOn` stubs | The mechanism from the Resistor and DIP migrations (`Template.deletedOn`, `DeletedVariantsTest`). |
|
||||
| D8 | Factory blocks get variant-style import tracking: each factory block has `createdOn`/`deletedOn`, the import date is stored under a new key | Mirrors `VariantManager`; lets new factory blocks reach existing users. |
|
||||
| D9 | Exploded factory blocks only for the common enclosures: pedals 1590A, 1590B, 125B, 1590BB, 1590XX, 1590DD; amps 1441-10, 1441-18, 1441-28, 1441-32 (§3.4) | The block toolbar is a flat list of buttons; the full lineup stays in the datasheet. |
|
||||
| D10 | A composite's z-order is the **minimum** of its children's, computed per instance | A composite occupies one slot in the stack and is drawn as a unit, so it should sit under what is placed on it afterwards. For a chassis block min = max = `CHASSIS`. For a maker board built from a board, pads and silkscreen text, max would be `TEXT` and the board would cover every part placed later; min is `BOARD`, and locking the Board layer locks the whole board. |
|
||||
| D11 | Die-cast boxes come from the 1590 and 1550 series only, natural finish only, plus generic sizes such as 125B under `Others`. HWCHAS walnut chassis and rack cases are out of this change | Painted and black versions share the natural part's dimensions, and the shaped 1590 STOMP boxes (TRPB, TRPC, STPC) are sold painted only. The others are listed in §6. |
|
||||
| D12 | BOM: one line per enclosure, valued by model. `getValueForDisplay()` returns the model for a `TOP` panel and `null` for any other side; `bomPolicy` stays `SHOW_ONLY_TYPE_NAME` | `BomMaker` keys rows by type + value and skips a `null` value, so an exploded 1590BB reads `Chassis Panel / 1590BB / 1` instead of five panels. Free-form and old-file panels are `TOP` with an empty value and list as they do today. An exploded block placed as a composite lists under its block name, so the block's `CompositeComponent` carries the model as its value too (§3.4). |
|
||||
| D1 | One component draws the whole enclosure; no per-side panels and no exploded building blocks | Every datasheet model is an exploded enclosure in one click, the BOM gets one line per box, stretching the top drags the sides along, rotation needs no special code, and the component sits on the Chassis layer natively. Building blocks would have needed import tracking, a flat toolbar of ~10 buttons, and a per-panel BOM workaround. |
|
||||
| D2 | Row format `Group,Model,X,Y,Height`: the top panel's size as placed, then the wall height, every size with its unit (`119.5 mm`, `17 in`), parsed with `Size.parseSize` like `DIL_IC` | Pedal drawings are metric, Hammond chassis are nominal inches; writing each in its native unit keeps the file checkable against the drawings. |
|
||||
| D3 | `Value` is backed by `AbstractShape.value` through `getModel()` with `@EditableProperty(name = "Value")`; `height` and `sides` are new fields | `value` is a `String` every shape already serializes and nothing read, and `AbstractShape.getValue()` is typed `Void`. New fields read `null` from old files: `getHeight()` null means no sides, `getSides()` defaults to `All`. |
|
||||
| D4 | Die-cast boxes up to 125 mm long (1590, 1550, 125B) are listed upright, with Hammond's length along Y; longer boxes and all 1441/1444 chassis horizontal. A new enclosure is an upright 125B. `applyModel` sets `Value`, `Height` and the top panel size, keeping the first control point and the direction the panel is drawn in | Pedals use the small boxes upright, with the jacks and DC socket on the short ends, which the front and back panels then show; bigger boxes and amp chassis are used lying down. |
|
||||
| D5 | The datasheet carries no corner radius; `Radius` defaults to 0 and only the top panel uses it, the sides are drawn square | Hammond does not publish the die-cast corner radius (§5), so rounded corners are set by hand when wanted. |
|
||||
| D6 | Length/Width are Hammond's outside dimensions; Height is the drillable wall: box height without the lid for die-cast boxes, outside height for 1441/1444 | The lid of a 1590 is the pedal's bottom, which the exploded view leaves out. |
|
||||
| D7 | Die-cast taper is ignored: the top uses the outer size at the lid opening and the sides are rectangles | Hammond does not publish the floor size; the walls slope at most 2 deg, so the floor is 0.7-1.9 mm smaller per side (§5). |
|
||||
| D8 | A composite's z-order is the minimum of its children's, computed per instance | A composite is drawn as a unit, so it should sit under what is placed on it afterwards; a maker board built from a board, pads and silkscreen text belongs on the Board layer, not the Text layer. |
|
||||
| D9 | Die-cast boxes come from the 1590 and 1550 series only, natural finish only, plus generic sizes such as 125B under `Others`. HWCHAS walnut chassis and rack cases are out | Painted and black versions share the natural part's dimensions, and the shaped 1590 STOMP boxes (TRPB, TRPC, STPC) are sold painted only. |
|
||||
|
||||
## 3. Implementation
|
||||
|
||||
Step 4 depends on 2 and 3.
|
||||
|
||||
### 3.1 Composite z-order (core) - done
|
||||
|
||||
- `ComponentProcessor.getZOrder(IDIYComponent<?>)`: for a `CompositeComponent`, the minimum over
|
||||
its children, recursing into nested composites; a childless composite and any other component
|
||||
use the type's z-order. Not cached: a type lookup is a map hit and composites are few.
|
||||
- Every class-level layer read goes through it: `Presenter` insertion (`addComponent`,
|
||||
`addComponents`), hidden and locked layers, `selectAll(layer)`, send to back / bring to front;
|
||||
`GroupAndLockIndex.isLocked`; `ComparatorFactory.getComponentZOrderComparator`; the `[L#]` tag
|
||||
in `ExplorerPane`, which now shows composites too.
|
||||
- Paint order is the project list order, so existing files render the same; only hide/lock and
|
||||
future insertion change. `flexibleZOrder = true` stays.
|
||||
- Tests: `CompositeComponentTest` (chassis-only, mixed, nested and childless composites; layer
|
||||
lock; comparator) and `PresenterTests.testChassisCompositeIsPlacedUnderExistingComponents`.
|
||||
- Every class-level layer read goes through it: `Presenter` insertion, hidden and locked layers,
|
||||
`selectAll(layer)`, send to back / bring to front; `GroupAndLockIndex.isLocked`;
|
||||
`ComparatorFactory.getComponentZOrderComparator`; the `[L#]` tag in `ExplorerPane`.
|
||||
- Tests: `CompositeComponentTest` and
|
||||
`PresenterTests.testChassisCompositeIsPlacedUnderExistingComponents`.
|
||||
|
||||
### 3.2 `ChassisPanel` datasheet (library)
|
||||
### 3.2 Enclosure (library) - done
|
||||
|
||||
- `enableDatasheet = true, datasheetCreationStepCount = 2, datasheetModelColumn = 1`,
|
||||
`implements IDatasheetSupport`, `ChassisPanel(String[] model)` constructor.
|
||||
- `getModel()` / `setModel()` over the inherited `value` field as `Value`, and a new serialized
|
||||
`side` whose getter tolerates `null` (D3). Override `getValueForDisplay()` for the BOM (D12).
|
||||
- `@AiNote`: a datasheet model is a Hammond part number such as 1590BB or 1444-32 and is stored as
|
||||
'Value'; it sets the panel size for the panel's `Side`, so set `Side` before or together with
|
||||
the model. Only the top panel carries the enclosure into the BOM. "125B" is a generic size
|
||||
sold by several makers (about 122 x 66 x 40 mm with the lid, often with thinner walls) and has
|
||||
its own row under `Others`; its Hammond equivalent is 1590N1.
|
||||
- `ChassisPanel.datasheet` from §4. Rows are listed per group in the order given there.
|
||||
- `variants.xml`: `125B`, `A`, `B`, `BB` become `deletedOn` stubs; extend `DeletedVariantsTest`.
|
||||
- `ChassisPanelDatasheetTest`, modelled on `ResistorDatasheetTest`: every row parses; each side
|
||||
gets the expected size; changing `Side` resizes; a panel from an old file (empty value, null
|
||||
side) keeps its geometry; the BOM lists one line per top panel, valued by model, and none for
|
||||
side panels.
|
||||
- Localization: `Side`, `Top`, `Front`, `Back`, `Left`, `Right` in
|
||||
every `lang/` file. Fix the description typo "withouth".
|
||||
- Regenerate `catalog_full.json` as the Resistor change did.
|
||||
- `ChassisPanel` implements `IDatasheetSupport` (two creation steps, model column 1) with a
|
||||
`ChassisPanel(String[] model)` constructor; rows in `datasheets/ChassisPanel.datasheet`.
|
||||
- `getSidePanels()` derives the side rectangles from the top panel's normalized corners and
|
||||
`Spacing` (a new field; `null` from files reads as 0); `draw()`
|
||||
fills them before `stopTracking()` so they take part in hit-testing, and outlines them with the
|
||||
top. `getValueForDisplay()` returns the model.
|
||||
- Category `Hardware` for `ChassisPanel`, the three cutouts, `DrillHole` and `DialScale`. New
|
||||
language keys in every `lang/` file: `Hardware`, `Sides`, `All`, `Front and Back` (`Height`
|
||||
and `None` existed). `catalog_full.json` and `catalog_index.json` regenerated.
|
||||
- Tests: `ChassisPanelDatasheetTest` (every row applies, unique model names, inch rows,
|
||||
radius left alone by a model, side layout for All / Front and Back / None, spacing, sides follow a stretched top, no height, old-file
|
||||
panel, BOM).
|
||||
|
||||
### 3.3 Factory block import tracking (core)
|
||||
### 3.3 Verify
|
||||
|
||||
- New `org.diylc.core.FactoryBlock` (`name`, `createdOn`, `deletedOn`, `components`), the shape of
|
||||
`Template`. `blocks.xml` becomes a list of these; the user's `BLOCKS_KEY` map is unchanged.
|
||||
- `BuildingBlockManager.importDefaultBlocks` mirrors `VariantManager`: import a block when its
|
||||
`createdOn` is after the stored `DEFAULT_BLOCKS_IMPORT_DATE_KEY` and the user has no block of
|
||||
that name; remove it when `deletedOn` is after the import date.
|
||||
- Migration: the three existing blocks keep `createdOn = null` and are imported only when the
|
||||
legacy `DEFAULT_BLOCKS_IMPORTED_KEY` is false (a fresh install), so users who deleted them do not
|
||||
get them back.
|
||||
- Test alongside the variant import tests: fresh install, upgrade from the boolean flag, new block
|
||||
after an import, deleted block, user block with a clashing name.
|
||||
|
||||
### 3.4 Exploded blocks
|
||||
|
||||
- Ten blocks named `Hammond <model> (Exploded)`, or `<model> (Exploded)` for a generic size
|
||||
(`125B (Exploded)`): the six pedal enclosures from D9 and four amp chassis, one per size class.
|
||||
The amp picks are the steel 1441 sizes amp builders and kit
|
||||
suppliers stock (Tube Town, an amp-parts shop, carries 1441-10, -18, -28 and -32); steel over
|
||||
the 1444 because builders warn that thin chassis sag under heavy transformers.
|
||||
|
||||
| Class | Typical build | Block | W x D x H | Why this size |
|
||||
|---|---|---|---|---|
|
||||
| Small | Tweed Champ (5F1) | 1441-10 | 8 x 4 x 2 in | Closest Hammond to the original 5F1 chassis (8-3/4 x 4-1/8 x 2-5/8 in). |
|
||||
| Medium | 18 W Marshall (TMB) | 1441-18 | 13.5 x 5 x 2 in | The Hammond size suggested for 18 W builds; dedicated 18 W chassis are similarly long and narrow (17 x 6-1/2 x 2-1/2 in), which fits the in-line tube row. |
|
||||
| Larger | 50 W Plexi / JTM45 | 1441-28 | 16 x 8 x 3 in | 16 x 8 x 2-3 in is the size quoted for 50 W Marshall builds; 3 in clears the transformers. |
|
||||
| Large | 100 W modern (SLO-style) | 1441-32 | 17 x 10 x 3 in | Largest common format; room for two channels, four power tubes and large iron. |
|
||||
|
||||
- No source names a Hammond for the SLO specifically (the real head is 25 in wide, wider than
|
||||
any Hammond chassis); 1441-32 is a size judgement.
|
||||
- Each block is five `ChassisPanel`s with `Value` (model) and `Side` set; the block's composite
|
||||
value is the model as well, so the BOM line reads `Hammond 1590BB (Exploded) / 1590BB`. With the top at (0,0)-(L,W): front (0,-H)-(L,0), back (0,W)-(L,W+H), left (-H,0)-(0,W),
|
||||
right (L,0)-(L+H,W). Edge radius on the top panel only.
|
||||
- Generate the XML once from the datasheet rather than by hand, and add a test that every panel of
|
||||
every factory chassis block matches its datasheet row and touches its neighbours edge to edge,
|
||||
so the two cannot drift.
|
||||
|
||||
### 3.5 Verify
|
||||
|
||||
`mvn -q test` (spans core and library), then offer the regression suite: §3.1 changes hide/lock
|
||||
behaviour of existing composites and §3.2 touches serialization.
|
||||
`mvn -q test`, then the regression suite: the z-order change alters hide/lock of existing
|
||||
composites, and `ChassisPanel` gained serialized fields and a new category.
|
||||
|
||||
## 4. Datasheet rows
|
||||
|
||||
Sources: Hammond per-part drawings, `https://www.hammfg.com/files/parts/pdf/<PART>.pdf`; series
|
||||
tables on hammfg.com (1590, 1590-STOMP, 1441, 1444). Die-cast sizes are drawing outside dimensions
|
||||
at the lid opening; heights are the box without the 4 mm lid. Chassis sizes are Hammond's nominal
|
||||
outside W x D x H. Radius 5 on die-cast boxes is carried over from the old variants, **unverified**
|
||||
(§5); sheet-metal chassis are drawn square.
|
||||
outside W x D x H. Rows of die-cast boxes up to 125 mm long have their two top sizes swapped so
|
||||
they place upright (D4). There is no radius column (D5).
|
||||
|
||||
Die-cast boxes are grouped by series only (1590, 1550), in Hammond's catalogue order, and only
|
||||
natural-finish (unpainted) part numbers are rows. Chassis are grouped by family, then height. The
|
||||
1590 group has 37 rows; the toolbox already splits a datasheet submenu longer than
|
||||
`MAX_MENU_ITEMS` (30) into ranged submenus, so it needs no further split.
|
||||
|
||||
```
|
||||
Diecast (1590),1590LLB,50.5,50.5,21,5
|
||||
Diecast (1590),1590LB,50.55,50.6,27,5
|
||||
Diecast (1590),1590H,53,38,27,5
|
||||
Diecast (1590),1590Y,92,92,38,5
|
||||
Diecast (1590),1590A,92.6,38.5,27,5
|
||||
Diecast (1590),1590G,100,50,21.5,5
|
||||
Diecast (1590),1590G2,100,50,27,5
|
||||
Diecast (1590),1590S,110.5,82.4,40,5
|
||||
Diecast (1590),1590B,112.4,60.5,27,5
|
||||
Diecast (1590),1590B2,112.4,60.5,33.5,5
|
||||
Diecast (1590),1590BS,112,60.5,38,5
|
||||
Diecast (1590),1590B3,116,77,33.5,5
|
||||
Diecast (1590),1590BB,119.5,94,30,5
|
||||
Diecast (1590),1590BB2,119.5,94,33.75,5
|
||||
Diecast (1590),1590BBS,119.5,94,38.1,5
|
||||
Diecast (1590),1590Q,120,120,30,5
|
||||
Diecast (1590),1590U,120,120,55,5
|
||||
Diecast (1590),1590V,120,120,90,5
|
||||
Diecast (1590),1590C,119.5,94,52.5,5
|
||||
Diecast (1590),1590T,120,80,55,5
|
||||
Diecast (1590),1590CE,120,100,61,5
|
||||
Diecast (1590),1590N1,121.2,65.5,35.8,5
|
||||
Diecast (1590),1590KK,125,125,53,5
|
||||
Diecast (1590),1590K,125,125,75,5
|
||||
Diecast (1590),1590J,145,95,45.1,5
|
||||
Diecast (1590),1590XX,145.2,121.2,35.2,5
|
||||
Diecast (1590),1590X,145.2,121.2,52.3,5
|
||||
Diecast (1590),1590P1,153,83.1,46.4,5
|
||||
Diecast (1590),1590D,187.75,119.5,52,5
|
||||
Diecast (1590),1590DD,188,120,33,5
|
||||
Diecast (1590),1590E,188,120,78,5
|
||||
Diecast (1590),1590F,188,188,63,5
|
||||
Diecast (1590),1590R1,192,112,57,5
|
||||
Diecast (1590),1590DE,200,120,60,5
|
||||
Diecast (1590),1590EE,200,120,81,5
|
||||
Diecast (1590),1590BX2,254,70,31,5
|
||||
Diecast (1590),1590BX,254,70,46,5
|
||||
Diecast (1550),1550Q,60,55,26,5
|
||||
Diecast (1550),1550P,80,55,21,5
|
||||
Diecast (1550),1550A,89,35,26,5
|
||||
Diecast (1550),1550B,114.5,64,26,5
|
||||
Diecast (1550),1550D,115,64,51,5
|
||||
Diecast (1550),1550C,115,90,51,5
|
||||
Diecast (1550),1550M,120,100,31,5
|
||||
Diecast (1550),1550K,140,102,73,5
|
||||
Diecast (1550),1550L,165,127,73,5
|
||||
Diecast (1550),1550E,171,121,51,5
|
||||
Diecast (1550),1550F,171,121,101,5
|
||||
Diecast (1550),1550G,222,146,51,5
|
||||
Diecast (1550),1550H,222,146,101,5
|
||||
Diecast (1550),1550N,250,250,97,5
|
||||
Diecast (1550),1550J,275,175,63,5
|
||||
Others,125B,122,66,36,5
|
||||
Chassis - Steel (1441),1441-9,8 in,4 in,1 in,0
|
||||
Chassis - Steel (1441),1441-15,10 in,6 in,1 in,0
|
||||
Chassis - Steel (1441),1441-6,4 in,4 in,2 in,0
|
||||
Chassis - Steel (1441),1441-8,6 in,4 in,2 in,0
|
||||
Chassis - Steel (1441),1441-12,7 in,5 in,2 in,0
|
||||
Chassis - Steel (1441),1441-10,8 in,4 in,2 in,0
|
||||
Chassis - Steel (1441),1441-14,9 in,5 in,2 in,0
|
||||
Chassis - Steel (1441),1441-16,10 in,6 in,2 in,0
|
||||
Chassis - Steel (1441),1441-22,12 in,8 in,2 in,0
|
||||
Chassis - Steel (1441),1441-29,12 in,10 in,2 in,0
|
||||
Chassis - Steel (1441),1441-18,13.5 in,5 in,2 in,0
|
||||
Chassis - Steel (1441),1441-26,16 in,8 in,2 in,0
|
||||
Chassis - Steel (1441),1441-30,17 in,10 in,2 in,0
|
||||
Chassis - Steel (1441),1441-34,17 in,12 in,2 in,0
|
||||
Chassis - Steel (1441),1441-24,12 in,8 in,3 in,0
|
||||
Chassis - Steel (1441),1441-28,16 in,8 in,3 in,0
|
||||
Chassis - Steel (1441),1441-20,17 in,4 in,3 in,0
|
||||
Chassis - Steel (1441),1441-32,17 in,10 in,3 in,0
|
||||
Chassis - Steel (1441),1441-36,17 in,12 in,3 in,0
|
||||
Chassis - Steel (1441),1441-38,17 in,14 in,3 in,0
|
||||
Chassis - Steel (1441),1441-33,17 in,10 in,4 in,0
|
||||
Chassis - Steel (1441),1441-40,17 in,14 in,4 in,0
|
||||
Chassis - Steel (1441),1441-42,17 in,14 in,5 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-45351,4.5 in,3.5 in,1 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-9,8 in,4 in,1 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-15,10 in,6 in,1 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-6415,6 in,4 in,1.5 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-84515,8 in,4.5 in,1.5 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-6,4 in,4 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-542,5 in,4 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-8,6 in,4 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-12,7 in,5 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-772,7 in,7 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-10,8 in,4 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-862,8 in,6 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-14,9 in,5 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-972,9 in,7 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-9552,9.5 in,5 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-16,10 in,6 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-1172,11 in,7 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-22,12 in,8 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-29,12 in,10 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-1372,13 in,7 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-18,13.5 in,5 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-26,16 in,8 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-30,17 in,10 in,2 in,0
|
||||
Chassis - Aluminium (1444) 1-2 in,1444-17132,17 in,13 in,2 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-95525,9.5 in,5 in,2.5 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-10825,10 in,8 in,2.5 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-12825,12 in,8 in,2.5 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-643,6 in,4 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-753,7 in,5 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-9553,9.5 in,5 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1053,10 in,5 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1273,12 in,7 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-24,12 in,8 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-12103,12 in,10 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-12123,12 in,12 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1463,14 in,6 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-14103,14 in,10 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1573,15 in,7 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1593,15 in,9 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-28,16 in,8 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-20,17 in,4 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1763,17 in,6 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1773,17 in,7 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-1783,17 in,8 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-32,17 in,10 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17123,17 in,12 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17133,17 in,13 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17143,17 in,14 in,3 in,0
|
||||
Chassis - Aluminium (1444) 2.5-3 in,1444-17173,17 in,17 in,3 in,0
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-33,17 in,10 in,4 in,0
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17134,17 in,13 in,4 in,0
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17154,17 in,15 in,4 in,0
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17174,17 in,17 in,4 in,0
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17105,17 in,10 in,5 in,0
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17135,17 in,13 in,5 in,0
|
||||
Chassis - Aluminium (1444) 4-6 in,1444-17156,17 in,15 in,6 in,0
|
||||
```
|
||||
The rows are in `diylc-library/src/main/resources/datasheets/ChassisPanel.datasheet`.
|
||||
|
||||
|
||||
Group sizes: 37 (1590), 15 (1550), 1 (Others); 23 / 24 / 25 / 7 chassis (132 rows). `Others`
|
||||
holds generic sizes sold by several makers under one name, currently only 125B (122 x 66 x 40 mm
|
||||
with the backplate, per a maker's listing). The 1590 rows already in the research were read from the per-part drawings; 1590H, U,
|
||||
V, CE, KK, K, E, F, R1, DE, EE, BX2 and BX, and all 1550 rows except 1550B, come from Hammond's
|
||||
series tables (whole mm, lid included).
|
||||
with the backplate, per a maker's listing). The other 1590 rows were read from the per-part
|
||||
drawings, except 1590H, U, V, CE, KK, K, E, F, R1, DE, EE, BX2 and BX, which come from Hammond's
|
||||
series table (whole mm, lid included) like all 1550 rows but 1550B.
|
||||
|
||||
Finish and option suffixes are not rows: `BK3` (black 1441), `BK` (black 1550), colour codes on
|
||||
1590 (`RD`, `CB`, ...), `W` prefix (watertight; IP66/IP67 gaskets on the 1550), `F`/`FL`
|
||||
(flanged), `CWW` (walnut sides on sizes 12/16/22/24/32/33, which shorten the usable front, back and
|
||||
@@ -278,7 +102,7 @@ top by about 22 mm).
|
||||
|
||||
| Item | Status |
|
||||
|---|---|
|
||||
| Die-cast corner radius (top view) and top-to-side edge fillet | Not published; 5 mm is the old variants' figure. Measure from Hammond STEP models or a box. |
|
||||
| Die-cast corner radius (top view) and top-to-side edge fillet | Not published, so not in the datasheet (D5). Measure from Hammond STEP models or a box if it is ever wanted. |
|
||||
| Die-cast floor size (pedal top face) | Not published; between the outer size and outer minus 2 x (box height x tan 2 deg). |
|
||||
| 1590DD box height | Drawing gives 37.00 both overall and box; 33 assumes the usual 4 mm lid. |
|
||||
| 1590D box height | ~52, same assumption. |
|
||||
@@ -294,3 +118,10 @@ top by about 22 mm).
|
||||
- HWCHAS walnut-frame chassis (HWCHAS1310 / 1710; aluminium top 298.45 x 222.25 / 400.05 x
|
||||
222.25 mm on a 19.05 mm walnut frame): a different construction from the folded sheet metal.
|
||||
- Hammond rack cases (RM, RMCS) and the 1458 instrument enclosure.
|
||||
- Factory building blocks are still imported once, behind the boolean
|
||||
`DEFAULT_BLOCKS_IMPORTED_KEY`, so a block added to `blocks.xml` later never reaches existing
|
||||
users. Fix by giving factory blocks `createdOn`/`deletedOn` and an import date, as `VariantManager`
|
||||
does, when a new factory block is next needed.
|
||||
- Configs older than class-keyed variants store keys like `Electro-Mechanical.Chassis Panel`;
|
||||
`VariantManager`'s upgrade maps them by the current category and name, so such variants would
|
||||
not carry over. Map the legacy name if it turns out to matter.
|
||||
|
||||
Reference in New Issue
Block a user