 Bane Stojkovic
|
86b54509bf
|
A board can no longer be selected, dragged or stretched through its own Underside Display, where dragging it moved the mirror under the mouse and the board went the wrong way
|
2026-11-12 14:34:05 +01:00 |
|
|
Bane Stojkovic
|
be87c08e7e
|
New solder pads have a plated through hole by default, while pads saved without a hole type stay non-plated; Gerber marks pads with a hole as component pads and pads without one as SMD pads
|
2026-11-12 11:27:07 +01:00 |
|
|
Bane Stojkovic
|
3049d4910c
|
via and double-sided pad
|
2026-11-12 10:48:19 +01:00 |
|
|
Bane Stojkovic
|
d166c58161
|
Copper keeps its 'Layer' property in the editor, the term PCB tools use for copper, while still counting as a Board Side component in code
|
2026-11-11 21:40:33 +01:00 |
|
|
Bane Stojkovic
|
aef300d902
|
Traces, curved traces, ground fills, solder pads and PCB text call their layer 'Board Side', like every other part, and count as Board Side components in code; the saved field is still 'layer'
|
2026-11-11 21:15:26 +01:00 |
|
|
Bane Stojkovic
|
7ae773ab77
|
A part's Gerber silkscreen layer follows its Board Side in IGerberComponentSimple's default, so the exporter no longer swaps layers after the fact and GerberLayer.flip() is gone
|
2026-11-11 20:48:35 +01:00 |
|
|
Bane Stojkovic
|
13b31e6dd5
|
Review fixes: a drag in the Underside Display picks the part a click would, the part being placed there is drawn like the parts already there, a bottom Dot no longer adds an empty silkscreen page; one helper decides a part's board side and copper layers share an interface
|
2026-11-11 17:32:46 +01:00 |
|
|
Bane Stojkovic
|
19c78e5fa9
|
Parts dragged from the component tree or toolbox into a board's Underside Display go on the bottom of the board
|
2026-11-11 17:02:06 +01:00 |
|
|
Bane Stojkovic
|
7f8c790936
|
A 'Dot' used as a solder joint can be put on the bottom of the board with the 'Board Side' property
|
2026-11-11 16:57:35 +01:00 |
|
|
Bane Stojkovic
|
eeca9f112d
|
New parts can be placed in a board's Underside Display; a part placed there goes on the bottom of the board
|
2026-11-11 15:46:29 +01:00 |
|
|
Bane Stojkovic
|
122a91a6f0
|
The silkscreen print-out has a separate page for parts placed on the bottom of the board
|
2026-11-11 15:37:27 +01:00 |
|
|
Bane Stojkovic
|
246763419c
|
All PCB parts with a top silkscreen, including tube sockets, rotary switches, relays and transformers, have the 'Board Side' property
|
2026-11-11 15:34:40 +01:00 |
|
|
Bane Stojkovic
|
9721307586
|
Bottom-side plan: the board side is a plain property and parts are not mirrored for the user
|
2026-11-11 15:31:32 +01:00 |
|
|
Bane Stojkovic
|
9765f04e3c
|
Parts placed on the bottom of the board are drawn faded on the canvas and solid in the Underside Display mirror
|
2026-11-11 15:20:06 +01:00 |
|
|
Bane Stojkovic
|
df873df04a
|
Resistors, capacitors, diodes, ICs, transistors and other PCB parts can be placed on the bottom of the board with the new 'Board Side' property; Gerber export puts their silkscreen on the bottom layer with the text mirrored
|
2026-11-11 15:15:19 +01:00 |
|
|
Bane Stojkovic
|
b76d315f44
|
Components can be dragged and their points stretched through the Underside Display mirror of a board
|
2026-11-11 15:05:28 +01:00 |
|
|
Bane Stojkovic
|
90e10f4597
|
Components can be selected by clicking them in the Underside Display mirror of a board
|
2026-11-11 14:56:02 +01:00 |
|
|
Bane Stojkovic
|
3506c97403
|
A component can report which side of the board it is mounted on, and Gerber export puts the silkscreen of a part mounted underneath on the bottom layer
|
2026-11-11 14:48:57 +01:00 |
|
|
Bane Stojkovic
|
324cb20634
|
Gerber export decides each component's layer in one place, and Gerber layers can be mapped to the other side of the board
|
2026-11-11 14:46:02 +01:00 |
|
|
Bane Stojkovic
|
f73574641c
|
phase 1
|
2026-11-10 22:50:16 +01:00 |
|
|
Bane Stojkovic
|
84726e6d16
|
Create bottom-side-components.md
|
2026-10-13 12:16:45 +02:00 |
|