Copper keeps its 'Layer' property in the editor, the term PCB tools use for copper, while still counting as a Board Side component in code

# Conflicts:
#	diylc/diylc-core/src/main/resources/update.xml

diylc/.claude/skills/regression-test/SKILL.md

@@ -1,6 +1,6 @@
 ---
 name: regression-test
-description: Run the DIYLC end-to-end regression suite, which renders ~700 sample .diy projects and compares PNG exports and netlists against reference outputs. Use after any change to rendering, component drawing, serialization, netlist or analyzer logic, or when asked to check for regressions or regenerate reference files.
+description: Run the DIYLC end-to-end regression suite, which renders just under 100 sample .diy projects and compares PNG exports and netlists against reference outputs. Use after any change to rendering, component drawing, serialization, netlist or analyzer logic, or when asked to check for regressions or regenerate reference files.
 ---
 
 # Running the DIYLC regression suite
@@ -29,16 +29,18 @@ already has the arguments and JVM flags. Offer that first.
 
 The runner needs the `--add-opens` / `--add-exports` flags and a classpath spanning all three
 modules; `mvn exec:java` will not work because it runs in Maven's own classloader and fails to find
-Reflections. Build a classpath and fork a JVM:
+Reflections. Build a classpath and fork a JVM.
+
+The classpath has to be built in the same reactor run as the compile. Running
+`dependency:build-classpath` on a single module fails with a `DependencyResolutionException`,
+because `diylc-processor` is not installed in the local repository and the plugin can only resolve
+it from the reactor. The relative `outputFile` gives each module its own `target/cp.txt`:
 
 ```bash
 cd diylc
-SP=/tmp   # or the session scratchpad
 
-mvn -q -pl diylc-swing -am test-compile
-mvn -q -pl diylc-swing   dependency:build-classpath -Dmdep.outputFile=$SP/cp-swing.txt -Dmdep.includeScope=test
-mvn -q -pl diylc-core    dependency:build-classpath -Dmdep.outputFile=$SP/cp-core.txt  -Dmdep.includeScope=test
-mvn -q -pl diylc-library dependency:build-classpath -Dmdep.outputFile=$SP/cp-lib.txt   -Dmdep.includeScope=test
+mvn -q -pl diylc-swing -am test-compile dependency:build-classpath \
+  -Dmdep.outputFile=target/cp.txt -Dmdep.includeScope=test
 
 java \
   --add-exports java.desktop/com.apple.eawt.event=ALL-UNNAMED \
@@ -49,19 +51,20 @@ java \
   --add-opens java.desktop/java.awt=ALL-UNNAMED \
   --add-opens java.desktop/java.awt.font=ALL-UNNAMED \
   --add-opens java.desktop/java.awt.geom=ALL-UNNAMED \
-  -cp "diylc-swing/target/test-classes:diylc-swing/target/classes:diylc-core/target/classes:diylc-library/target/classes:$(cat $SP/cp-swing.txt):$(cat $SP/cp-core.txt):$(cat $SP/cp-lib.txt)" \
+  -cp "diylc-swing/target/test-classes:diylc-swing/target/classes:diylc-core/target/classes:diylc-library/target/classes:$(cat diylc-swing/target/cp.txt):$(cat diylc-core/target/cp.txt):$(cat diylc-library/target/cp.txt)" \
   org.diylc.RegressionTestRunner \
   "$(cd .. && pwd)/diylc-regression-data" TEST [filter]
 ```
 
-Sanity-check the log line `Presenter - Current DIYLC version: 6.4.0` near the end. If it reports
-`5.0.0`, the `--add-opens` flags are missing and the run is invalid.
+Sanity-check the log line `Presenter - Current DIYLC version: ...`. It should report the newest
+version in `diylc-core/src/main/resources/update.xml`; if it reports `5.0.0`, the `--add-opens`
+flags are missing and the run is invalid.
 
 ### Arguments
 
 1. Path to `diylc-regression-data`
 2. `TEST` or `PREPARE`
-3. Optional filter — a substring matched against file paths. **Use it.** The full suite is ~700
+3. Optional filter — a substring matched against file paths. The full suite is just under 100
    projects; while narrowing down an issue, run one file or one directory at a time
    (e.g. `splitter2`, or `guitar`).
 

diylc/CLAUDE.md

@@ -210,6 +210,14 @@ logic, netlist and analyzer behaviour, datasheet parsing, core utilities. Compon
 user interaction are covered by the regression suite instead, not by unit tests. Test classes are
 named `*Test` or `*Tests` and carry the license header like any other file.
 
+## Changelog
+
+User-facing changes are listed in `diylc-core/src/main/resources/update.xml`, one `Version` block
+per release. Within a block, all `NEW_FEATURE` entries come first, then `IMPROVEMENT`, then
+`BUG_FIX`; keep the existing order inside each group and add a new entry at the end of its own
+group, not at the end of the block. After a merge that brings entries in from both sides, sort the
+unreleased block again. Released blocks stay exactly as they shipped.
+
 ## Git
 
 **Do not commit or push.** Make the change in the working tree and stop; the maintainer reviews and

diylc/catalog_full.json

@@ -1,5 +1,5 @@
 {
-  "version" : "6.10.0",
+  "version" : "6.11.0",
   "components" : [ {
     "name" : "Blank Board",
     "className" : "boards.BlankBoard",
@@ -7,7 +7,7 @@
     "namePrefix" : "Board",
     "description" : "Blank circuit board",
     "creationMethod" : "SINGLE_CLICK",
-    "notes" : [ "Use 'Explicit' value for 'Dimension Mode' when placing a new board. The single control point places the top-left corner and 'Explicit Length' and 'Explicit Width' properties determine the dimensions", "Set 'Underside Display' only if explicitly asked to. The values other than 'NONE' render the mirror image of the board in the provided direction with the offset controlled by 'Underside Offset'", "Use this board as a base of PCB, eyelet and turret boards unless asked otherwise" ],
+    "notes" : [ "Use 'Explicit' value for 'Dimension Mode' when placing a new board. The single control point places the top-left corner and 'Explicit Length' and 'Explicit Width' properties determine the dimensions", "Set 'Underside Display' only if explicitly asked to. The values other than 'NONE' render the mirror image of the board in the provided direction with the offset controlled by 'Underside Offset'", "Use this board as a base of PCB, eyelet and turret boards unless asked otherwise", "When the board needs mounting holes, because the request asks for them or the board goes into an enclosure, also select Drill Hole and use one Drill Hole per hole" ],
     "properties" : [ {
       "name" : "Alpha",
       "type" : "Percentage",
@@ -1035,7 +1035,7 @@
     }, {
       "name" : "Layer",
       "type" : "PCBLayer",
-      "possibleValues" : [ "_1", "_2", "_3", "_4", "_5", "_6", "_7", "_8" ],
+      "possibleValues" : [ "_1", "_2" ],
       "defaultValue" : "_1"
     }, {
       "name" : "Name",
@@ -1077,7 +1077,7 @@
     }, {
       "name" : "Layer",
       "type" : "PCBLayer",
-      "possibleValues" : [ "_1", "_2", "_3", "_4", "_5", "_6", "_7", "_8" ],
+      "possibleValues" : [ "_1", "_2" ],
       "defaultValue" : "_1"
     }, {
       "name" : "Name",
@@ -1196,6 +1196,11 @@
     "creationMethod" : "SINGLE_CLICK",
     "notes" : [ "A junction marker for schematics and wiring diagrams; it is drawing only and connects nothing, since ends that meet at the same point are already connected. For a pad on a board use Solder Pad" ],
     "properties" : [ {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
+    }, {
       "name" : "Color",
       "type" : "Color",
       "format" : "hex",
@@ -1277,7 +1282,7 @@
     }, {
       "name" : "Layer",
       "type" : "PCBLayer",
-      "possibleValues" : [ "_1", "_2", "_3", "_4", "_5", "_6", "_7", "_8" ],
+      "possibleValues" : [ "_1", "_2" ],
       "defaultValue" : "_1"
     }, {
       "name" : "Name",
@@ -1459,6 +1464,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -1706,7 +1716,7 @@
     }, {
       "name" : "Layer",
       "type" : "PCBLayer",
-      "possibleValues" : [ "_1", "_2", "_3", "_4", "_5", "_6", "_7", "_8" ],
+      "possibleValues" : [ "_1", "_2" ],
       "defaultValue" : "_1"
     }, {
       "name" : "Node Name",
@@ -7155,6 +7165,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Font Size Override",
       "type" : "Integer"
@@ -7228,6 +7243,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Font Size Override",
       "type" : "Integer"
@@ -7306,6 +7326,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Font Size Override",
       "type" : "Integer"
@@ -7746,6 +7771,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Display",
       "type" : "Display",
@@ -7851,6 +7881,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -8509,6 +8544,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Name",
       "type" : "String"
@@ -8577,6 +8617,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Font Size Override",
       "type" : "Integer"
@@ -8645,6 +8690,11 @@
     }, {
       "name" : "Angle Offset",
       "type" : "Angle"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Color",
       "type" : "Color",
@@ -9035,6 +9085,11 @@
     }, {
       "name" : "Angle",
       "type" : "Angle"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Color",
       "type" : "Color",
@@ -9372,6 +9427,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -9496,6 +9556,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -11466,6 +11531,7 @@
     "namePrefix" : "Hole",
     "description" : "Drill hole marker for PCB, chassis or faceplate",
     "creationMethod" : "SINGLE_CLICK",
+    "notes" : [ "Use for round holes: the mounting holes of a Blank Board, and the holes for jacks, pots, switches and LEDs in an Enclosure; for other openings in an Enclosure use the Rectangular, Elliptical or Polygonal Cutout", "The single control point is the centre of the hole and 'Diameter' is the drilled size, e.g. 3.2mm for an M3 mounting screw. Place mounting holes inside the board, typically one near each corner and clear of the components and traces", "A hole is not conductive and has no terminals, so nothing connects to it; on a PCB it is exported as a non-plated drill" ],
     "properties" : [ {
       "name" : "Alpha",
       "type" : "Percentage",
@@ -11526,7 +11592,7 @@
     "namePrefix" : "ENC",
     "description" : "Top panel of an enclosure or chassis, optionally with its sides unfolded",
     "creationMethod" : "SINGLE_CLICK",
-    "notes" : [ "The two control points are opposite corners of the enclosure's top panel. With 'Height' above zero the sides are unfolded around it as an exploded view, each as tall as 'Height' and set 'Spacing' apart from it: the front against the top panel's upper edge, the back against its lower edge and, when 'Sides' is All, the left and right sides against its left and right edges. The bottom is never drawn. With 'Sides' set to None, or 'Height' at zero, it is a single flat panel of any size, such as one side of a chassis drawn on its own", "The enclosure is not conductive in the netlist: jacks, pots and lugs drawn on it are not joined through it, so chassis ground points must be connected explicitly", "A datasheet model is a Hammond enclosure part number such as 1590BB, 1550B or 1444-32, or a generic size such as 125B, and is stored as 'Value'; it sets the top panel to the enclosure's length and width, upright for pedal-sized die-cast boxes up to 125 mm long and horizontal for bigger boxes and amplifier chassis and 'Height' to its wall height. 125B is a generic size sold by several makers; its Hammond equivalent is 1590N1" ],
+    "notes" : [ "One Enclosure draws a whole box, so use one per box rather than one per side. Also select Drill Hole for the round holes of its jacks, pots, switches and LEDs, and the Rectangular, Elliptical or Polygonal Cutout for any other openings", "Draw each hole and cutout on the panel it goes through, inside that panel's outline", "The two control points are opposite corners of the enclosure's top panel. With 'Height' above zero the sides are unfolded around it as an exploded view, each as tall as 'Height' and set 'Spacing' apart from it: the front against the top panel's upper edge, the back against its lower edge and, when 'Sides' is All, the left and right sides against its left and right edges. The bottom is never drawn. With 'Sides' set to None, or 'Height' at zero, it is a single flat panel of any size, such as one side of a chassis drawn on its own", "The enclosure is not conductive in the netlist: jacks, pots and lugs drawn on it are not joined through it, so chassis ground points must be connected explicitly", "A datasheet model is a Hammond enclosure part number such as 1590BB, 1550B or 1444-32, or a generic size such as 125B, and is stored as 'Value'; it sets the top panel to the enclosure's length and width, upright for pedal-sized die-cast boxes up to 125 mm long and horizontal for bigger boxes and amplifier chassis and 'Height' to its wall height. 125B is a generic size sold by several makers; its Hammond equivalent is 1590N1" ],
     "datasheetModels" : [ "1444-10", "1444-1172", "1444-12", "1444-1372", "1444-14", "1444-15", "1444-16", "1444-17132", "1444-18", "1444-22", "1444-26", "1444-29", "1444-30", "1444-45351", "1444-542", "1444-6", "1444-6415", "1444-772", "1444-8", "1444-84515", "1444-862", "1444-9", "1444-9552", "1444-972", "1444-1053", "1444-10825", "1444-12103", "1444-12123", "1444-1273", "1444-12825", "1444-14103", "1444-1463", "1444-1573", "1444-1593", "1444-17123", "1444-17133", "1444-17143", "1444-17173", "1444-1763", "1444-1773", "1444-1783", "1444-20", "1444-24", "1444-28", "1444-32", "1444-643", "1444-753", "1444-95525", "1444-9553", "1444-17105", "1444-17134", "1444-17135", "1444-17154", "1444-17156", "1444-17174", "1444-33", "1441-10", "1441-12", "1441-14", "1441-15", "1441-16", "1441-18", "1441-20", "1441-22", "1441-24", "1441-26", "1441-28", "1441-29", "1441-30", "1441-32", "1441-33", "1441-34", "1441-36", "1441-38", "1441-40", "1441-42", "1441-6", "1441-8", "1441-9", "1550A", "1550B", "1550C", "1550D", "1550E", "1550F", "1550G", "1550H", "1550J", "1550K", "1550L", "1550M", "1550N", "1550P", "1550Q", "1590A", "1590B", "1590B2", "1590B3", "1590BB", "1590BB2", "1590BBS", "1590BS", "1590BX", "1590BX2", "1590C", "1590CE", "1590D", "1590DD", "1590DE", "1590E", "1590EE", "1590F", "1590G", "1590G2", "1590H", "1590J", "1590K", "1590KK", "1590LB", "1590LLB", "1590N1", "1590P1", "1590Q", "1590R1", "1590S", "1590T", "1590U", "1590V", "1590X", "1590XX", "1590Y", "125B" ],
     "properties" : [ {
       "name" : "Alpha",
@@ -11841,6 +11907,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -11969,7 +12040,7 @@
     }, {
       "name" : "Layer",
       "type" : "PCBLayer",
-      "possibleValues" : [ "_1", "_2", "_3", "_4", "_5", "_6", "_7", "_8" ],
+      "possibleValues" : [ "_1", "_2" ],
       "defaultValue" : "_1"
     }, {
       "name" : "Orientation",
@@ -12081,6 +12152,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12169,6 +12245,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12251,6 +12332,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12366,6 +12452,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12491,6 +12582,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12588,6 +12684,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12692,6 +12793,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12803,6 +12909,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12912,6 +13023,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -12993,6 +13109,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -13082,6 +13203,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Coil",
       "type" : "Color",
@@ -13221,6 +13347,11 @@
       "type" : "Color",
       "format" : "hex",
       "defaultValue" : "#333333"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -13300,6 +13431,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -13458,6 +13594,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -13526,6 +13667,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -13620,6 +13766,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -13727,6 +13878,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -13785,6 +13941,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -13843,6 +14004,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -16500,6 +16666,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -16573,6 +16744,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -16836,6 +17012,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -16929,6 +17110,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Border",
       "type" : "Color",
@@ -17016,6 +17202,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Color",
       "type" : "Color",
@@ -17101,6 +17292,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -17262,6 +17458,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -17343,6 +17544,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -17778,6 +17984,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -18209,6 +18420,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -19071,6 +19287,11 @@
       "type" : "Percentage",
       "format" : "number without the % sign, e.g. 100",
       "defaultValue" : "100"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Body",
       "type" : "Color",
@@ -20010,6 +20231,11 @@
       "type" : "Base",
       "possibleValues" : [ "B9A", "OCTAL", "B7G", "B12C", "UX4" ],
       "defaultValue" : "B9A"
+    }, {
+      "name" : "Board Side",
+      "type" : "PCBLayer",
+      "possibleValues" : [ "_1", "_2" ],
+      "defaultValue" : "_2"
     }, {
       "name" : "Color",
       "type" : "Color",

diylc/catalog_index.json

@@ -1,10 +1,10 @@
 {
-  "version" : "6.10.0",
+  "version" : "6.11.0",
   "categories" : {
     "Boards" : [ {
       "name" : "Blank Board",
       "className" : "boards.BlankBoard",
-      "notes" : [ "Use this board as a base of PCB, eyelet and turret boards unless asked otherwise" ]
+      "notes" : [ "Use this board as a base of PCB, eyelet and turret boards unless asked otherwise", "When the board needs mounting holes, because the request asks for them or the board goes into an enclosure, also select Drill Hole and use one Drill Hole per hole" ]
     }, {
       "name" : "Breadboard",
       "className" : "boards.Breadboard"
@@ -283,13 +283,15 @@
       "className" : "chassis.DialScale"
     }, {
       "name" : "Drill Hole",
-      "className" : "electromechanical.DrillHole"
+      "className" : "electromechanical.DrillHole",
+      "notes" : [ "Use for round holes: the mounting holes of a Blank Board, and the holes for jacks, pots, switches and LEDs in an Enclosure; for other openings in an Enclosure use the Rectangular, Elliptical or Polygonal Cutout" ]
     }, {
       "name" : "Elliptical Cutout",
       "className" : "chassis.EllipticalCutout"
     }, {
       "name" : "Enclosure",
-      "className" : "chassis.ChassisPanel"
+      "className" : "chassis.ChassisPanel",
+      "notes" : [ "One Enclosure draws a whole box, so use one per box rather than one per side. Also select Drill Hole for the round holes of its jacks, pots, switches and LEDs, and the Rectangular, Elliptical or Polygonal Cutout for any other openings" ]
     }, {
       "name" : "Polygonal Cutout",
       "className" : "chassis.PolygonalCutout"

diylc/diylc-core/src/main/java/org/diylc/common/DrawOption.java

@@ -72,5 +72,9 @@ public enum DrawOption {
   /**
    * When applied, all colors will be converted to blackest black or whitest white
    */
-  MONOCHROMATIC;
+  MONOCHROMATIC,
+  /**
+   * Paint on the bottom side of a board is drawn at reduced opacity, as if seen through the board.
+   */
+  FADE_FAR_SIDE;
 }

diylc/diylc-core/src/main/java/org/diylc/common/IPlugInPort.java

@@ -90,6 +90,7 @@ public interface IPlugInPort extends ISelectionProcessor, IMouseProcessor, IKeyP
   public static final String FONT_SCALE_FACTOR_KEY = "fontScaleFactor";
   public static final String SHOW_RESIZE_DIMENSIONS_TOOLTIP_KEY = "showResizeDimensionsTooltip";
   public static final String AUTO_UNIT_CONVERSION_KEY = "autoUnitConversion";
+  public static final String VALUE_NOTATION_KEY = "valueNotation";
 
 
   public static final String RULER_IN_SUBDIVISION_2 = "base of 2";
@@ -101,10 +102,16 @@ public interface IPlugInPort extends ISelectionProcessor, IMouseProcessor, IKeyP
   public static final String SNAP_TO_COMPONENTS = "Components";
   public static final String SNAP_TO_DEFAULT = SNAP_TO_GRID;
 
+  public static final String VALUE_NOTATION_DECIMAL = "Decimal (4.7K, 0.22uF, 6.3V)";
+  public static final String VALUE_NOTATION_RKM = "RKM (4K7, 0u22, 6V3)";
+  public static final String VALUE_NOTATION_DEFAULT = VALUE_NOTATION_DECIMAL;
+
   public static final String SHOW_NODE_NAME_TOOLTIPS_KEY = "showNodeNameTooltips";
 
   public static final String LOCKED_ALPHA = "lockedAlpha";
 
+  public static final String FADE_FAR_SIDE_KEY = "fadeFarSide";
+
   public static final String LANGUAGE = "language";
   public static final String LANGUAGE_DEFAULT = "English";
 

diylc/diylc-core/src/main/java/org/diylc/common/PCBLayer.java

@@ -25,7 +25,11 @@ import org.diylc.core.gerber.GerberLayer;
 
 public enum PCBLayer {
 
-  _1("Bottom"), _2("Top"), _3("Inner 1"), _4("Inner 2"), _5("Inner 3"), _6("Inner 4"), _7("Inner 5"), _8("Inner 6");
+  _1("Bottom"), _2("Top"),
+  // DIYLC models two-sided boards only. The inner layers are kept, in order, so that files using
+  // them still load with the same layer ids; the editor hides them and Gerber export rejects them.
+  @Deprecated _3("Inner 1"), @Deprecated _4("Inner 2"), @Deprecated _5("Inner 3"),
+  @Deprecated _6("Inner 4"), @Deprecated _7("Inner 5"), @Deprecated _8("Inner 6");
   
   private String label;
   

diylc/diylc-core/src/main/java/org/diylc/core/IBoardSideComponent.java

@@ -0,0 +1,58 @@
+/*
+
+    DIY Layout Creator (DIYLC).
+    Copyright (c) 2009-2025 held jointly by the individual authors.
+
+    This file is part of DIYLC.
+
+    DIYLC is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    DIYLC is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with DIYLC.  If not, see <http://www.gnu.org/licenses/>.
+
+*/
+package org.diylc.core;
+
+import org.diylc.common.PCBLayer;
+
+/**
+ * Interface for components on one side of a board, such as a resistor, an IC or a trace. The side
+ * says where the part sits physically; it is separate from {@link ILayeredComponent}, which drives
+ * continuity, because the leads of a through-hole part connect to copper on both sides whichever
+ * side the part is mounted on. Copper implements it through {@link IPCBLayerComponent}, whose layer
+ * is its side and also drives its continuity.
+ * 
+ * @author Branislav Stojkovic
+ */
+public interface IBoardSideComponent {
+
+  /**
+   * @return {@link PCBLayer#_2} for the top of the board or {@link PCBLayer#_1} for the bottom,
+   *         never an inner layer or null
+   */
+  PCBLayer getBoardSide();
+
+  /**
+   * Sets the side of the board the component is mounted on. The component is not mirrored.
+   * 
+   * @param boardSide {@link PCBLayer#_2} for the top or {@link PCBLayer#_1} for the bottom
+   */
+  void setBoardSide(PCBLayer boardSide);
+
+  /**
+   * @return {@link PCBLayer#_1} for a component mounted on the bottom of the board, and
+   *         {@link PCBLayer#_2} for any other, including components that have no side
+   */
+  static PCBLayer sideOf(IDIYComponent<?> component) {
+    return component instanceof IBoardSideComponent sided && sided.getBoardSide() == PCBLayer._1
+        ? PCBLayer._1 : PCBLayer._2;
+  }
+}

diylc/diylc-core/src/main/java/org/diylc/core/IDrawingObserver.java

@@ -21,6 +21,8 @@
 */
 package org.diylc.core;
 
+import org.diylc.common.PCBLayer;
+
 /**
  * Interface for tracking component drawing process. Components may use it to stop or restart
  * tracking. Anything drawn while tracking is stopped will not be added to the mouse hot-spot area.
@@ -65,4 +67,26 @@ public interface IDrawingObserver {
    * @param marker
    */
   void setContinuityMarker(String marker);
+
+  /**
+   * Notifies the observer that what follows is painted on the given side of the board, until
+   * {@link #stopDrawingSide()}. Paint that is not bracketed is on the top (component) side. The
+   * observer may draw paint on the side facing away from the viewer at reduced opacity, as if seen
+   * through the board. Inner layers count as the bottom side.
+   *
+   * @param side the layer the paint lies on
+   */
+  default void startDrawingSide(PCBLayer side) {}
+
+  /**
+   * Notifies the observer that what follows is visible from both sides of the board, such as a
+   * drilled hole or a cut through the copper, and is never drawn faded, until
+   * {@link #stopDrawingSide()}.
+   */
+  default void startDrawingBothSides() {}
+
+  /**
+   * Notifies the observer that paint is back on the top (component) side.
+   */
+  default void stopDrawingSide() {}
 }

diylc/diylc-core/src/main/java/org/diylc/core/IPCBLayerComponent.java

@@ -0,0 +1,52 @@
+/*
+
+    DIY Layout Creator (DIYLC).
+    Copyright (c) 2009-2025 held jointly by the individual authors.
+
+    This file is part of DIYLC.
+
+    DIYLC is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    DIYLC is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with DIYLC.  If not, see <http://www.gnu.org/licenses/>.
+
+*/
+package org.diylc.core;
+
+import org.diylc.common.PCBLayer;
+
+/**
+ * Interface for copper drawn on a layer of a PCB, such as a trace, pad, ground fill or PCB text.
+ * The layer is the copper's board side, but unlike the side of a mounted part it also decides
+ * which other copper the copper connects to. It keeps the name 'Layer' in the editor, which is
+ * what PCB tools call it for copper.
+ * 
+ * @author Branislav Stojkovic
+ */
+public interface IPCBLayerComponent extends IBoardSideComponent {
+
+  PCBLayer getLayer();
+
+  void setLayer(PCBLayer layer);
+
+  /**
+   * @return the layer, with the deprecated inner layers counted as the bottom
+   */
+  @Override
+  default PCBLayer getBoardSide() {
+    return getLayer() == PCBLayer._2 ? PCBLayer._2 : PCBLayer._1;
+  }
+
+  @Override
+  default void setBoardSide(PCBLayer boardSide) {
+    setLayer(boardSide);
+  }
+}

diylc/diylc-core/src/main/java/org/diylc/core/annotations/RequiredPositiveNonZeroMeasureValidator.java

@@ -0,0 +1,41 @@
+/*
+
+    DIY Layout Creator (DIYLC).
+    Copyright (c) 2009-2025 held jointly by the individual authors.
+
+    This file is part of DIYLC.
+
+    DIYLC is free software: you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation, either version 3 of the License, or
+    (at your option) any later version.
+
+    DIYLC is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with DIYLC.  If not, see <http://www.gnu.org/licenses/>.
+
+*/
+package org.diylc.core.annotations;
+
+import org.diylc.core.ValidationException;
+
+/**
+ * Same as {@link PositiveNonZeroMeasureValidator}, but also rejects an empty value. Use it for
+ * measures the component cannot be drawn without.
+ * 
+ * @author Branislav Stojkovic
+ */
+public class RequiredPositiveNonZeroMeasureValidator extends PositiveNonZeroMeasureValidator {
+
+  @Override
+  public void validate(Object owner, Object value) throws ValidationException {
+    if (value == null) {
+      throw new ValidationException("must not be empty.");
+    }
+    super.validate(owner, value);
+  }
+}

diylc/diylc-core/src/main/java/org/diylc/core/gerber/GerberExporter.java

@@ -16,8 +16,10 @@ import org.apache.log4j.Logger;
 
 import com.bancika.gerberwriter.DataLayer;
 
+import org.diylc.common.PCBLayer;
 import org.diylc.core.ComponentState;
 import org.diylc.core.IBoard;
+import org.diylc.core.IBoardSideComponent;
 import org.diylc.core.IDIYComponent;
 import org.diylc.core.IView;
 import org.diylc.core.Project;
@@ -145,8 +147,12 @@ public class GerberExporter {
     LOG.info("Completed export to gerber");
   }
 
-  private static void drawComponent(Project currentProject, GerberG2DWrapper g2d,
-                                    IDIYComponent<?> c, boolean outlineMode) {
+  /**
+   * Draws the specified component into the Gerber layers it belongs to. This is the only place that
+   * decides which layer a component's output goes to.
+   */
+  static void drawComponent(Project currentProject, GerberG2DWrapper g2d,
+                            IDIYComponent<?> c, boolean outlineMode) {
     IGerberComponent gerberComponent = (IGerberComponent) c;
     g2d.startedDrawingComponent();
     if (gerberComponent instanceof IGerberComponentCustom) {
@@ -156,7 +162,10 @@ public class GerberExporter {
       IGerberComponentSimple gerberComponentSimple = (IGerberComponentSimple) gerberComponent;
       g2d.startGerberOutput(gerberComponentSimple.getGerberLayer(),
               gerberComponentSimple.getGerberFunction(), gerberComponentSimple.isGerberNegative());
+      // text on the bottom silkscreen is read from below, so it is written mirrored
+      g2d.setMirrorText(IBoardSideComponent.sideOf(c) == PCBLayer._1);
       c.draw(g2d, ComponentState.NORMAL, outlineMode, currentProject, g2d);
+      g2d.setMirrorText(false);
       g2d.stopGerberOutput();
     }
   }

diylc/diylc-core/src/main/java/org/diylc/core/gerber/GerberG2DWrapper.java

@@ -58,6 +58,7 @@ public class GerberG2DWrapper extends Graphics2D
   private double tolerance;
 
   private Rectangle2D boardRect;
+  private boolean mirrorText = false;
 
   public GerberG2DWrapper(Graphics2D graphics2d, String diylcVersion, Rectangle2D boardRect) {
     super();
@@ -154,6 +155,15 @@ public class GerberG2DWrapper extends Graphics2D
     return layerMap;
   }
 
+  /**
+   * Sets whether text is written mirrored, each string about its own centre. The output is in top
+   * view, so text on the bottom side has to be mirrored to read correctly once the board is turned
+   * over.
+   */
+  public void setMirrorText(boolean mirrorText) {
+    this.mirrorText = mirrorText;
+  }
+
   @Override
   public void draw(Shape s) {
     if (trackingGerber && !getColor().equals(Constants.TRANSPARENT_COLOR)) {
@@ -181,6 +191,10 @@ public class GerberG2DWrapper extends Graphics2D
     GlyphVector gv = font.createGlyphVector(graphics2d.getFontRenderContext(), str);
     
     AffineTransform translateInstance = AffineTransform.getTranslateInstance(x, y);
+    if (mirrorText) {
+      translateInstance.translate(gv.getLogicalBounds().getWidth(), 0);
+      translateInstance.scale(-1, 1);
+    }
 
     for (int i = 0; i < gv.getNumGlyphs(); i++) {
         Shape glyphShape = gv.getGlyphOutline(i);

diylc/diylc-core/src/main/java/org/diylc/core/gerber/GerberPathRenderer.java

@@ -25,29 +25,10 @@ import com.bancika.gerberwriter.Point;
 import com.bancika.gerberwriter.path.MoveTo;
 import com.bancika.gerberwriter.path.Path;
 
-import org.diylc.core.ComponentState;
-import org.diylc.core.IDIYComponent;
-import org.diylc.core.Project;
 import org.diylc.core.measures.SizeUnit;
 
 public class GerberPathRenderer {
 
-  public static void drawComponent(Project currentProject, GerberG2DWrapper g2d, IDIYComponent<?> c,
-      boolean outlineMode) {
-    IGerberComponent gerberComponent = (IGerberComponent) c;
-    g2d.startedDrawingComponent();
-    if (gerberComponent instanceof IGerberComponentCustom) {
-      IGerberComponentCustom gerberComponentCustom = (IGerberComponentCustom) gerberComponent;
-      gerberComponentCustom.draw(g2d, ComponentState.NORMAL, outlineMode, currentProject, g2d, g2d);
-    } else if (gerberComponent instanceof IGerberComponentSimple) {
-      IGerberComponentSimple gerberComponentSimple = (IGerberComponentSimple) gerberComponent;
-      g2d.startGerberOutput(gerberComponentSimple.getGerberLayer(),
-          gerberComponentSimple.getGerberFunction(), gerberComponentSimple.isGerberNegative());
-      c.draw(g2d, ComponentState.NORMAL, outlineMode, currentProject, g2d);
-      g2d.stopGerberOutput();
-    }
-  }
-
   public static void outputPathArea(PathIterator pathIterator, DataLayer dataLayer, double d,
       boolean isNegative, String function) {
     List<PathWithNegative> outputPath =

diylc/diylc-core/src/main/java/org/diylc/core/gerber/IGerberComponentSimple.java

@@ -1,9 +1,18 @@
 package org.diylc.core.gerber;
 
+import org.diylc.common.PCBLayer;
+import org.diylc.core.IBoardSideComponent;
+import org.diylc.core.IDIYComponent;
+
 public interface IGerberComponentSimple extends IGerberComponent {
 
+  /**
+   * @return the silkscreen on the side of the board the component is mounted on
+   */
   default GerberLayer getGerberLayer() {
-    return GerberLayer.SilkscreenTop;
+    return this instanceof IDIYComponent<?> component
+        && IBoardSideComponent.sideOf(component) == PCBLayer._1
+            ? GerberLayer.SilkscreenBot : GerberLayer.SilkscreenTop;
   }
 
   default String getGerberFunction() {

diylc/diylc-core/src/main/java/org/diylc/core/measures/Capacitance.java

@@ -41,14 +41,16 @@ public class Capacitance extends AbstractMeasure<CapacitanceUnit> {
   }
 
   public static Capacitance parseCapacitance(String value) {
-    value = value.replace("*", "");
-    for (CapacitanceUnit unit : CapacitanceUnit.values()) {
-      if (value.toLowerCase().endsWith(unit.toString().toLowerCase())) {
-        value = value.substring(0, value.length() - unit.toString().length()).trim();
-        return new Capacitance(parse(value), unit);
-      }
+    ValueNotation.ParsedMeasure<CapacitanceUnit> parsed;
+    try {
+      parsed = ValueNotation.parse(value, CapacitanceUnit::fromSymbol);
+    } catch (IllegalArgumentException e) {
+      throw new IllegalArgumentException("Could not parse capacitance: " + value, e);
     }
-    throw new IllegalArgumentException("Could not parse capacitance: " + value);
+    if (parsed.unit() == null) {
+      throw new IllegalArgumentException("Could not parse capacitance: " + value);
+    }
+    return new Capacitance(parsed.value(), parsed.unit());
   }
   
   public Double getNormalizedValue() {
@@ -56,4 +58,12 @@ public class Capacitance extends AbstractMeasure<CapacitanceUnit> {
       return null;
     return value * unit.getFactor(); 
   }
+
+  @Override
+  public String toString() {
+    if (ValueNotation.getCurrent() == ValueNotation.RKM && value != null && unit != null) {
+      return ValueNotation.formatRkm(value, unit.getRkmSymbol());
+    }
+    return super.toString();
+  }
 }

diylc/diylc-core/src/main/java/org/diylc/core/measures/CapacitanceUnit.java

@@ -23,14 +23,16 @@ package org.diylc.core.measures;
 
 public enum CapacitanceUnit implements Unit {
 
-  pF(1e-6, "pF"), nF(1e-3, "nF"), uF(1, "uF"), mF(1e3, "mF"), F(1e6, "F");
+  pF(1e-6, "pF", "p"), nF(1e-3, "nF", "n"), uF(1, "uF", "u"), mF(1e3, "mF", "m"), F(1e6, "F", "F");
 
   double factor;
   String display;
+  String rkmSymbol;
 
-  private CapacitanceUnit(double factor, String display) {
+  private CapacitanceUnit(double factor, String display, String rkmSymbol) {
     this.factor = factor;
     this.display = display;
+    this.rkmSymbol = rkmSymbol;
   }
 
   @Override
@@ -38,8 +40,49 @@ public enum CapacitanceUnit implements Unit {
     return factor;
   }
 
+  public String getRkmSymbol() {
+    return rkmSymbol;
+  }
+
   @Override
   public String toString() {
     return display;
   }
+
+  /**
+   * Resolves the unit written after a capacitance value, e.g. "nF", "n", "u", "\u00B5F" or "F".
+   * Case does not matter when the trailing "F" is present, which is how values have always been
+   * parsed. Without it, "M" is rejected so that it is never mistaken for mega.
+   * 
+   * @param symbol unit text with no surrounding whitespace
+   * @return the unit, or null when the text is not a capacitance unit
+   */
+  public static CapacitanceUnit fromSymbol(String symbol) {
+    if (symbol.equalsIgnoreCase("F")) {
+      return F;
+    }
+    String prefix = symbol;
+    if (symbol.length() == 2 && (symbol.endsWith("F") || symbol.endsWith("f"))) {
+      prefix = symbol.substring(0, 1).toLowerCase();
+    } else if (symbol.equals("M")) {
+      return null;
+    }
+    switch (prefix) {
+      case "p":
+      case "P":
+        return pF;
+      case "n":
+      case "N":
+        return nF;
+      case "u":
+      case "U":
+      case "\u00B5":
+      case "\u03BC":
+        return uF;
+      case "m":
+        return mF;
+      default:
+        return null;
+    }
+  }
 }

diylc/diylc-core/src/main/java/org/diylc/core/measures/Inductance.java

@@ -41,13 +41,24 @@ public class Inductance extends AbstractMeasure<InductanceUnit> {
   }
 
   public static Inductance parseCapacitance(String value) {
-    value = value.replace("*", "");
-    for (InductanceUnit unit : InductanceUnit.values()) {
-      if (value.toLowerCase().endsWith(unit.toString().toLowerCase())) {
-        value = value.substring(0, value.length() - unit.toString().length()).trim();
-        return new Inductance(parse(value), unit);
-      }
+    ValueNotation.ParsedMeasure<InductanceUnit> parsed;
+    try {
+      parsed = ValueNotation.parse(value, InductanceUnit::fromSymbol);
+    } catch (IllegalArgumentException e) {
+      throw new IllegalArgumentException("Could not parse inductance: " + value, e);
     }
-    throw new IllegalArgumentException("Could not parse inductance: " + value);
+    if (parsed.unit() == null) {
+      throw new IllegalArgumentException("Could not parse inductance: " + value);
+    }
+    return new Inductance(parsed.value(), parsed.unit());
+  }
+
+  @Override
+  public String toString() {
+    if (ValueNotation.getCurrent() == ValueNotation.RKM && value != null && unit != null
+        && unit.getRkmSymbol() != null) {
+      return ValueNotation.formatRkm(value, unit.getRkmSymbol());
+    }
+    return super.toString();
   }
 }

diylc/diylc-core/src/main/java/org/diylc/core/measures/InductanceUnit.java

@@ -23,14 +23,16 @@ package org.diylc.core.measures;
 
 public enum InductanceUnit implements Unit {
 
-  pH(1, "pH"), nH(1e3, "nH"), uH(1e6, "uH"), mH(1e9, "mH"), H(1e12, "H");
+  pH(1, "pH", "p"), nH(1e3, "nH", "n"), uH(1e6, "uH", "u"), mH(1e9, "mH", "m"), H(1e12, "H", "H");
 
   double factor;
   String display;
+  String rkmSymbol;
 
-  private InductanceUnit(double factor, String display) {
+  private InductanceUnit(double factor, String display, String rkmSymbol) {
     this.factor = factor;
     this.display = display;
+    this.rkmSymbol = rkmSymbol;
   }
 
   @Override
@@ -38,8 +40,50 @@ public enum InductanceUnit implements Unit {
     return factor;
   }
 
+  public String getRkmSymbol() {
+    return rkmSymbol;
+  }
+
   @Override
   public String toString() {
     return display;
   }
+
+  /**
+   * Resolves the unit written after an inductance value, e.g. "uH", "u", "\u00B5H" or "H".
+   * Case does not matter when the trailing "H" is present. Without it, "M" is rejected so that it
+   * is never mistaken for mega. "R" is not accepted: inductor makers print 4R7 for 4.7uH, while
+   * in RKM it would mean 4.7H.
+   * 
+   * @param symbol unit text with no surrounding whitespace
+   * @return the unit, or null when the text is not an inductance unit
+   */
+  public static InductanceUnit fromSymbol(String symbol) {
+    if (symbol.equalsIgnoreCase("H")) {
+      return H;
+    }
+    String prefix = symbol;
+    if (symbol.length() == 2 && (symbol.endsWith("H") || symbol.endsWith("h"))) {
+      prefix = symbol.substring(0, 1).toLowerCase();
+    } else if (symbol.equals("M")) {
+      return null;
+    }
+    switch (prefix) {
+      case "p":
+      case "P":
+        return pH;
+      case "n":
+      case "N":
+        return nH;
+      case "u":
+      case "U":
+      case "\u00B5":
+      case "\u03BC":
+        return uH;
+      case "m":
+        return mH;
+      default:
+        return null;
+    }
+  }
 }