BDC/diy-layout-creator
2
0
Fork 0
mirror of https://github.com/bancika/diy-layout-creator synced 2026-11-07 12:24:58 +10:00
Code Issues Packages Projects Releases Wiki Activity

Update update.xml

Browse Source
This commit is contained in:
Bane Stojkovic
2026-10-27 11:28:17 +01:00
parent 518ff921d3
commit 7d296565a9
1 changed files with 12 additions and 40 deletions
Download Patch File Download Diff File Expand all files Collapse all files
diylc/diylc-core/src/main/resources/update.xml
+12 -40
View File
@@ -664,51 +664,15 @@
</versionNumber>
<releaseDate>2026-10-17 00:00:00.000 CET</releaseDate>
<name></name>
<changes>
<org.diylc.appframework.update.Change>
<changeType>IMPROVEMENT</changeType>
<description>Rotating and mirroring the selection with 'Sticky Points' enabled now keeps the circuit connected, the same way moving it does - wires and leads stuck to the selection stay attached to their pins, and other rigid components stuck to it are rotated or mirrored along with it</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>IMPROVEMENT</changeType>
<description>Improved sorting of switching combinations in 'Analyze Guitar Diagrams' tool</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>BUG_FIX</changeType>
<description>Fixed Guitar Analyzer logic that merges switching configuration that produce the same outcome; in some cases it would remove switches from the list when it shouldn't</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>BUG_FIX</changeType>
<description>Gerber export on computers set to a language that uses a decimal comma (e.g. German, French, Serbian) produced files in which drill holes, pads and traces had the wrong size - a 0.8mm hole came out as 0mm and traces and the board outline had no width, so the files could not be used for fabrication</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>BUG_FIX</changeType>
<description>Zooming out until the drawing is smaller than the window made the toolbar above the canvas grow taller and squeeze the canvas; the toolbar now keeps its height at every zoom level</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>BUG_FIX</changeType>
<description>Fixed a bug that makes it impossible to clear a property with dynamic values, e.g. 'Selected Position' of a switch</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>BUG_FIX</changeType>
<description>Fixed a bug that makes 'Selected Position' list sometimes shows wrong values</description>
</org.diylc.appframework.update.Change>
</changes>
<url>https://github.com/bancika/diy-layout-creator/releases</url>
</org.diylc.appframework.update.Version>
<org.diylc.appframework.update.Version>
<versionNumber>
<major>6</major>
<minor>10</minor>
<build>0</build>
</versionNumber>
<releaseDate>2026-10-19 00:00:00.000 CET</releaseDate>
<name></name>
<changes>
<org.diylc.appframework.update.Change>
<changeType>NEW_FEATURE</changeType>
<description>AI Assistant can actively participate in circuit design, make changes to the project and designs circuits from scratch</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>IMPROVEMENT</changeType>
<description>Rotating and mirroring the selection with 'Sticky Points' enabled now keeps the circuit connected, the same way moving it does - wires and leads stuck to the selection stay attached to their pins, and other rigid components stuck to it are rotated or mirrored along with it</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>IMPROVEMENT</changeType>
<description>Allow active position selection for 'Rotary Switch Sealed', 'DIP Switch', 'Latching Switch Symbol', 'LP Switch', 'S1 Switch', allowing for more accurate circuit analysis and debugging</description>
@@ -737,6 +701,14 @@
<changeType>BUG_FIX</changeType>
<description>'Analyze Guitar Diagrams' ignored 'Stingray Bass Pickup', so a diagram built around it was reported as having no pickups connected to the output jack, and its coils were left out of the hum-cancelling and phase checks</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>BUG_FIX</changeType>
<description>Gerber export on computers set to a language that uses a decimal comma (e.g. German, French, Serbian) produced files in which drill holes, pads and traces had the wrong size - a 0.8mm hole came out as 0mm and traces and the board outline had no width, so the files could not be used for fabrication</description>
</org.diylc.appframework.update.Change>
<org.diylc.appframework.update.Change>
<changeType>BUG_FIX</changeType>
<description>Zooming out until the drawing is smaller than the window made the toolbar above the canvas grow taller and squeeze the canvas; the toolbar now keeps its height at every zoom level</description>
</org.diylc.appframework.update.Change>
</changes>
<url>https://github.com/bancika/diy-layout-creator/releases</url>
</org.diylc.appframework.update.Version>